Warp requirements and yield efficiency in the visual grading of sawn Radiata pine timber

Montón Lecumberri, Joaquín; Arriaga Martitegui, Francisco; Iñiguez Gonzalez, Guillermo y Segués, Edgar (2015). Warp requirements and yield efficiency in the visual grading of sawn Radiata pine timber. "Bioresources", v. 10 (n. 1); pp. 1115-1126. ISSN 1930-2126.

Descripción

Título: Warp requirements and yield efficiency in the visual grading of sawn Radiata pine timber
Autor/es:
  • Montón Lecumberri, Joaquín
  • Arriaga Martitegui, Francisco
  • Iñiguez Gonzalez, Guillermo
  • Segués, Edgar
Tipo de Documento: Artículo
Título de Revista/Publicación: Bioresources
Fecha: 2015
Volumen: 10
Materias:
Palabras Clave Informales: Deformation defects; Sawn timber; Radiata pine; Twist; Visual grading; Warp
Escuela: E.T.S.I. Montes (UPM) [antigua denominación]
Departamento: Ingeniería y Gestión Forestal y Ambiental
Licencias Creative Commons: Reconocimiento - Sin obra derivada - No comercial

Texto completo

[img]
Vista Previa
PDF (Document Portable Format) - Se necesita un visor de ficheros PDF, como GSview, Xpdf o Adobe Acrobat Reader
Descargar (670kB) | Vista Previa

Resumen

Three samples of sawn Radiata pine (Pinus radiata D. Don) timber, consisting of 150 pieces with dimensions of 80mmx120mmx2400mm, 80 pieces with dimensions of 150mmx200mmx4500mm, and 75 pieces with dimensions of 150mmx250mmx5600mm, were visually graded according to the Spanish standard UNE 56544 (2011) to analyze the influence or visual grading requirements on both the grading yield and mechanical properties. The resulting percentages of the rejected pieces stood at 19 and 28% for 150x250mm crooss-section pieces, respectively. That percentage increased to 73% for 80x120mm cross-section pieces. The grading yield and mechanical properties were then analyzed to determine the influence of warp defects. Three different criteria for limitng warp defects were considered, bending strength, and density were obtained. The results concluded that loosening specified requisites improves the visual grading output in the smallest cross-section, with no significant reduction in the mechanical properties. A proposal for a less rigorous specification of twist defects in the Spanish visual grading standard has been introduced.

Más información

ID de Registro: 41366
Identificador DC: http://oa.upm.es/41366/
Identificador OAI: oai:oa.upm.es:41366
URL Oficial: http://www.bioresourcesjournal.com/
Depositado por: Memoria Investigacion
Depositado el: 26 Ago 2016 11:30
Ultima Modificación: 26 Ago 2016 11:30
  • GEO_UP4
  • Open Access
  • Open Access
  • Sherpa-Romeo
    Compruebe si la revista anglosajona en la que ha publicado un artículo permite también su publicación en abierto.
  • Dulcinea
    Compruebe si la revista española en la que ha publicado un artículo permite también su publicación en abierto.
  • Recolecta
  • InvestigaM
  • Observatorio I+D+i UPM
  • OpenCourseWare UPM