Analysis Of The Effect Of Surface Oxidation On The Laser Transformation Hardening Of Cr-mo Steels

Cordovilla Baró, Francisco; García Beltrán, Ángel; Domíngez, Jesús; Sancho, Paula y Ocaña Moreno, José Luis (2017). Analysis Of The Effect Of Surface Oxidation On The Laser Transformation Hardening Of Cr-mo Steels. En: "CIBEM 2017 - XIII Congresso Ibero-Americano de Engenharia Mecânica", 23-26 Octubre 2017, Lisboa (Portugal). pp. 1-8.

Descripción

Título: Analysis Of The Effect Of Surface Oxidation On The Laser Transformation Hardening Of Cr-mo Steels
Autor/es:
  • Cordovilla Baró, Francisco
  • García Beltrán, Ángel
  • Domíngez, Jesús
  • Sancho, Paula
  • Ocaña Moreno, José Luis
Tipo de Documento: Ponencia en Congreso o Jornada (Artículo)
Título del Evento: CIBEM 2017 - XIII Congresso Ibero-Americano de Engenharia Mecânica
Fechas del Evento: 23-26 Octubre 2017
Lugar del Evento: Lisboa (Portugal)
Título del Libro: CIBEM 2017 - XIII Congresso Ibero-Americano de Engenharia Mecânica
Fecha: Octubre 2017
Materias:
Palabras Clave Informales: Laser-Hardening; Annealing; Martensite; Oxidation; Steel
Escuela: E.T.S.I. Industriales (UPM)
Departamento: Física Aplicada e Ingeniería de Materiales
Licencias Creative Commons: Reconocimiento - Sin obra derivada - No comercial

Texto completo

[img] PDF (Document Portable Format) - Acceso permitido solamente a usuarios en el campus de la UPM hasta 27 Octubre 2018 - Se necesita un visor de ficheros PDF, como GSview, Xpdf o Adobe Acrobat Reader
Descargar (1MB)

Resumen

Laser surface hardening is a technology that enables important advantages to be obtained in comparison with conventional techniques in terms of accuracy of the heat affected zone and productivity. Nevertheless, the development of realistic and flexible models has to be fulfilled in order to control the effects of every set of process conditions. Despite many different models having been developed, very few of them deal with the increment of absorption related with the instantaneous value of the layer of oxide growth during the process in a non-protective atmosphere. This work analyzes, on one hand, the problem of oxide formation at the external surface using kinetic relations, whose parameters have been related with the process variables, considering non-equilibrium conditions. Then, the oxide thickness was associated with a value of absorption through an innovative formula that considers the path of the laser radiation in the interface oxide-base material. On the other hand, when the dimensions of the surface to be treated are larger than the cross section of the laser beam several overlapped tracks are needed, and the distance between consecutive tracks becomes a fundamental design parameter. This work aims to optimize such parameter with the purpose of fulfilling a set of initial requirements avoiding the softening of the martensite achieved in the previous track. The model, in conjunction with a convenient geometrical characterization of the heat affected zone, enables a design strategy to be implemented which, using metallurgical and hardness maps, has the capability of attending different criteria. All the conditions proposed in the design of a suitable overlapping distance have been reproduced empirically for the case of the 42CrMo4 steel.

Más información

ID de Registro: 50007
Identificador DC: http://oa.upm.es/50007/
Identificador OAI: oai:oa.upm.es:50007
URL Oficial: http://redenacionaldecombustao.org/13o-congresso-ibero-americano-de-engenharia-mecanica-cibem
Depositado por: Memoria Investigacion
Depositado el: 12 Jun 2018 15:27
Ultima Modificación: 12 Jun 2018 15:27
  • GEO_UP4
  • Open Access
  • Open Access
  • Sherpa-Romeo
    Compruebe si la revista anglosajona en la que ha publicado un artículo permite también su publicación en abierto.
  • Dulcinea
    Compruebe si la revista española en la que ha publicado un artículo permite también su publicación en abierto.
  • Recolecta
  • InvestigaM
  • Observatorio I+D+i UPM
  • OpenCourseWare UPM