Corrosion-Inhibitor Efficiency Control: Comparison by Means of Different Portable Corrosion Rate Meters

Martinez Sierra, Isabel; Andrade Perdrix, Maria del Carmen; Rebolledo Ramos, Nuria; Luo, L. y Schutter, G. de (2010). Corrosion-Inhibitor Efficiency Control: Comparison by Means of Different Portable Corrosion Rate Meters. "Corrosion - The Journal of Science and Engineering", v. 66 (n. 2); pp. 1-12. ISSN 0010-9312. https://doi.org/10.5006/1.3319663.

Descripción

Título: Corrosion-Inhibitor Efficiency Control: Comparison by Means of Different Portable Corrosion Rate Meters
Autor/es:
  • Martinez Sierra, Isabel
  • Andrade Perdrix, Maria del Carmen
  • Rebolledo Ramos, Nuria
  • Luo, L.
  • Schutter, G. de
Tipo de Documento: Artículo
Título de Revista/Publicación: Corrosion - The Journal of Science and Engineering
Fecha: Enero 2010
Volumen: 66
Materias:
Palabras Clave Informales: confinement, corrosion, inhibitors, polarization resistance, reinforcement
Escuela: Otros Centros UPM
Departamento: Otro
Licencias Creative Commons: Reconocimiento - Sin obra derivada - No comercial

Texto completo

[img]
Vista Previa
PDF (Document Portable Format) - Se necesita un visor de ficheros PDF, como GSview, Xpdf o Adobe Acrobat Reader
Descargar (2MB) | Vista Previa

Resumen

Corrosion-inhibiting substances have been applied to suppress corrosion mainly on bare steel, but when corrosion is progressing, suppression can be achieved if anodic and cathodic reactions are avoided, which is not an easy objective, particularly if the bare metal is surrounded by concrete. In the present article, several corrosion inhibitors are studied to identify their inhibition efficiency in concrete. The percentage of reduction of the corrosion rate without and with inhibitor is named “inhibition efficiency.” This definition calls for the measurement of the corrosion rate and makes its measurement a must when studying corrosion-inhibiting substances. The most extended technique used for the corrosion rate quantification is based on the calculation of the polarization resistance, Rp. For the study presented in this article, several portable corrosion rate meters based on the Rp technique have been used. These equipment are needed for the evaluation of large structures and are able to confine the current in small areas or to determine the steel area affected by the signal for a correct corrosion rate calculation. A comparison among the different corrosion rate meters used for the inhibitor's efficiency has been done. This comparison has indicated that the corrosion rate meter with nonefficient confinement of the current is not able to detect clearly the passivation state.

Más información

ID de Registro: 8749
Identificador DC: http://oa.upm.es/8749/
Identificador OAI: oai:oa.upm.es:8749
Identificador DOI: 10.5006/1.3319663
URL Oficial: http://corrosion.aip.org/
Depositado por: Memoria Investigacion
Depositado el: 12 Mar 2013 14:52
Ultima Modificación: 20 Abr 2016 17:25
  • Open Access
  • Open Access
  • Sherpa-Romeo
    Compruebe si la revista anglosajona en la que ha publicado un artículo permite también su publicación en abierto.
  • Dulcinea
    Compruebe si la revista española en la que ha publicado un artículo permite también su publicación en abierto.
  • Recolecta
  • e-ciencia
  • Observatorio I+D+i UPM
  • OpenCourseWare UPM