2020-10-26T19:21:43Z
http://oa.upm.es/cgi/oai2
oai:oa.upm.es:20130
2016-04-21T22:33:23Z
7374617475733D707562
7375626A656374733D636F6E737472756363696F6E
747970653D636F6E666572656E63655F6974656D
Influence of the Second Flexural Mode on the Response of High-Speed Bridges
Museros Romero, Pedro
Alarcón Álvarez, Enrique
Civil Engineering and Construction
This paper deals with the assessment of the contribution of the second flexural mode to the dynamic behaviour of simply supported railway bridges. Alluding to the works of other authors, it is suggested in some references that the dynamic behaviour of simply supported bridges could be adequately represented taking into account only the contribution of the fundamental flexural mode. On the other hand, the European Rail Research Institute (ERRI) proposes that the second mode should also be included whenever the associated natural frequency is lower than 30 Hz]. This investigation endeavours to clarify the question as much as possible by establishing whether the maximum response of the bridge, in terms of displacements, accelerations and bending moments, can be computed accurately not taking account of the contribution of the second mode.
To this end, a dimensionless formulation of the equations of motion of a simply supported beam traversed by a series of equally spaced moving loads is presented. This formulation brings to light the fundamental parameters governing the behaviour of the beam: damping ratio, dimensionless speed $ \alpha$=VT/L, and L/d ratio (L stands for the span of the beam, V for the speed of the train, T represents the fundamental period of the bridge and d symbolises the distance between consecutive loads).
Assuming a damping ratio equal to 1%, which is a usual value for prestressed high-speed bridges, a parametric analysis is conducted over realistic ranges of values of $ \alpha$ and L/d. The results can be extended to any simply supported bridge subjected to a train of equally spaced loads in virtue of the so-called Similarity Formulae. The validity of these formulae can be derived from the dimensionless formulation mentioned above.
In the parametric analysis the maximum response of the bridge is obtained for one thousand values of speed that cover the range from the fourth resonance of the first mode to the first resonance of the second mode. The response at twenty-one different locations along the span of the beam is compared in order to decide if the maximum can be accurately computed with the sole contribution of the fundamental mode.
E.T.S.I. Industriales (UPM)
http://creativecommons.org/licenses/by-nc-nd/3.0/es/
2003
info:eu-repo/semantics/conferenceObject
Presentation at Congress or Conference
Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing | 9th International Conference on Civil and Structural Engineering Computing | 02/09/2003-04/09/2003 | Egmond-aan-Zee, The Netherlands
PeerReviewed
application/pdf
eng
http://www.ctresources.info/ccp/paper.html?id=3210
info:eu-repo/semantics/openAccess
http://oa.upm.es/20130/