Items where author is "Ocaña Moreno, José Luis"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 105.

Article

Colón Hernández, Cristóbal and Andrés García, María Isabel de and Moreno Díaz, Cristina and Alonso Medina, Aurelia and Porro González, Juan Antonio and Angulo Ramonell, Ignacio and Ocaña Moreno, José Luis (2019). Experimental determination of electronic density and temperature in water-confined plasmas generated by laser shock processing. "Metals", v. 9 (n. 7); pp. 808-822. ISSN 2075-4701. https://doi.org/10.3390/met9070808.

Li, Chuang and Cordovilla Baró, Francisco and Ocaña Moreno, José Luis (2018). Design optimization and fabrication of a novel structural piezoresistive pressure sensor for micro-pressure measurement. "Solid-State Electronics", v. 139 ; pp. 39-47. ISSN 0038-1101. https://doi.org/10.1016/j.sse.2017.09.012.

Li, Chuang and Cordovilla Baró, Francisco and Jagdheesh, Radhakrishnan and Ocaña Moreno, José Luis (2018). Design Optimization and Fabrication of a Novel Structural SOI Piezoresistive Pressure Sensor with High Accuracy. "Sensors" (n. 18); pp.. ISSN 1424-8220. https://doi.org/10.3390/s18020439.

Ocaña Moreno, José Luis and González-Carrasco, J. L. and Lieblich, M. and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Cordovilla Baró, Francisco and Angulo Ramonell, Ignacio and Izaguirre, I. (2018). Laser Shock Processing as an Advanced Technique for the Surface and Mechanical Resistance Properties Modification of Bioabsorbable Magnesium Alloys. "Materials Science Forum", v. 941 ; pp. 2489-2494. ISSN 0255-5476. https://doi.org/doi:10.4028/www.scientific.net/MSF.941.2489.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and García Beltrán, Ángel and Santiago, J.A. and Peral Jiménez, David (2017). Improvement of surface and mechanical properties of high strength metallic alloys by laser shock processing. "Advances in Materials and Processing Technologies", v. 3 (n. 1); pp. 12-22. ISSN 2374-068X. https://doi.org/10.1080/2374068X.2016.1247241.

Moreno-Diaz, Cristina and Alonso Medina, Aurelia and Colón Hernández, Cristóbal and Porro González, Juan Antonio and Ocaña Moreno, José Luis (2016). Measurement of plasma electron density generated in an experiment of laser shock processing, utilizing the H­α­-line. "Journal of Materials Processing Technology", v. 232 ; pp. 9-18. ISSN 0924-0136. https://doi.org/10.1016/j.jmatprotec.2016.01.026.

Ocaña Moreno, José Luis and Correa Guinea, Carlos and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David (2015). Induction of through-thickness compressive residual stress fields in thin Al2024-T351 plates by laser shock processing. "International Journal of Structural Integrity", v. 6 (n. 6); pp. 725-736. ISSN 1757-9864. https://doi.org/10.1108/IJSI-10-2014-0051.

Correa Guinea, Carlos and García Beltrán, Ángel and Ocaña Moreno, José Luis (2015). Thermomechanical modelling of direct laser forming = Simulación termo-mecánica de procesos de conformado directo por láser. "DYNA Ingeniería e Industria" ; pp. 1-13. ISSN 0012-7361. https://doi.org/10.6036/7497.

Guarneros, O. and Vicente Oliva, Jesús de and Maya, M. and Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis and García-Ballesteros Ramírez, Juan José and Rodríguez, S. R. and Duran, H. M. (2014). Uncertainty Estimation for Performance Evaluation of a Confocal Microscope as Metrology Equipment. "Mapan-Journal of Metrology Society of India", v. 29 (n. 1); pp. 29-42. ISSN 0970-3950. https://doi.org/10.1007/s12647-013-0060-2.

Ocaña Moreno, José Luis and Díaz, M. and Porro González, Juan Antonio and Ruiz de Lara de Luis, Leonardo and Correa, C. (2014). Effect of Thermal Treatments on the Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing. "Materials Science Forum", v. 783-86 (n. null); pp. 2376-2381. ISSN 0255-5476. https://doi.org/10.4028/www.scientific.net/MSF.783-786.2376.

Iordachescu, Mihaela and Ocaña Moreno, José Luis (2013). Residual stress distribution in ferritic-austenitic steel joints made by laser welding. "Soldadura y tecnologías de unión", v. 24 (n. 135); pp. 10-13. ISSN 1130-0280.

Iordachescu, Gabriela and Valiente Cancho, Andrés and Ocaña Moreno, José Luis (2013). Overall vs. local mechanical behaviour of ferritic austenitic steel joints made by laser welding. "Soldadura y Tecnologías de Unión", v. 134 (n. 24); pp. 6-9. ISSN 1130-0280.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Ruiz Hervías, Jesús and Ocaña Moreno, José Luis (2013). Mechanical behavior and residual stress field of dissimilar laser welded joints. "Metalurgia internaţional", v. 18 (n. 6); pp. 13-17. ISSN 1582-2214.

Iordachescu, Mihaela and Ruiz Hervías, Jesús and Luzin, V. and Scutelnicu, Elena and Valiente Cancho, Andrés and Ocaña Moreno, José Luis (2013). Residual stress distribution in ferritic to austenitic steel joints made by laser welding,. "The Annals of Dunarea de Jos University of Galati", v. 24 (n. 12); pp. 45-49. ISSN 1221-4639.

Trdan, Uros and Porro González, Juan Antonio and Ocaña Moreno, José Luis and Grum, Janez (2012). Laser shock peening without absorbent coating (LSPwC) effect on 3D surface topography and mechanical properties of 6082-T651 Al alloy. "Surface and Coatings Technology", v. 208 ; pp. 109-116. ISSN 0257-8972. https://doi.org/10.1016/j.surfcoat.2012.08.048.

Ivetic, G. and Meneghin, I. and Troiani, E. and Molinari, G. and Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Lanciotti, A. and Ristori, V. and Polese, Claudia and Plaisier, J. and Lausi, A. (2012). Fatigue in laser shock peened open-hole thin aluminium specimens. "Materials Science and Engineering: A", v. 542 ; pp. 573-579. ISSN 0921-5093. https://doi.org/10.1016/j.msea.2011.12.010.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Caballero, Luis and Iordachescu, Danut and Ocaña Moreno, José Luis and Porro González, Juan Antonio (2012). Laser Shock Processing influence on local properties and overall tensile behavior of friction stir welded joints. "Surface and Coatings Technology", v. 206 (n. 8-9); pp. 2422-2429. ISSN 0257-8972. https://doi.org/10.1016/j.surfcoat.2011.10.044.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Ocaña Moreno, José Luis and Torres, E. and Ruiz Hervías, Jesús (2012). Fracture propagation and stress corrosion in the case of dissimilar laser hybrid welded joints. "The Annals of Dunarea de Jos University of Galati", v. 23 ; pp. 11-15. ISSN 1221-4639.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2012). Mechanical properties enhancement of high reliability metallic materials by laser shock processing. "Materials Science Forum", v. 706-70 ; pp. 2565-2570. ISSN 0255-5476. https://doi.org/10.4028/www.scientific.net/MSF.706-709.2565.

Colina Brito, Mónica and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Allens-Perkins, F. and Guadaño, G. and Ocaña Moreno, José Luis (2011). Laser ablation modelling of aluminium, silver and crystalline silicon for applications in photovoltaic technologies. "Energy Materials", v. 27 (n. 6); pp. 414-423. ISSN 1748-9237. https://doi.org/10.1179/174329409X397804.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and García-Ballesteros Ramírez, Juan José and Zinoviev, K. and Férnandez-Sánchez, C. and Sanza Gutiérrez, Francisco Javier and Molpeceres Álvarez, Carlos Luis and Laguna Heras, Maria Fe and Llobera, A. and Ocaña Moreno, José Luis and Dominguez, C. (2011). UV laser-induced high resolution cleaving of Si wafers for micro-nano devices and polymeric waveguide characterization. "Applied Surface Science", v. 257 (n. 12); pp. 5424-5428. ISSN 0169-4332. https://doi.org/10.1016/j.apsusc.2010.11.021.

Morales Furió, Miguel and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and Holgado Bolaños, Miguel and Ocaña Moreno, José Luis (2010). Analysis of plasma thermal surface effects on the residual stress field induced by LSP in Al2024-t351. "Journal of Optoelectronics and Advanced Materials", v. 12 (n. 3); pp. 718-722. ISSN 1454-4164.

Grum, Janez and Trdan, Uros and Ocaña Moreno, José Luis and Porro González, Juan Antonio (2010). Laser Peening For Improving Metallic Components. "Metal Finishing News", v. 11 (n. marzo); pp. 58-60. ISSN 0026-0576.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Blasco Litago, Manuel and Molpeceres Álvarez, Carlos Luis and Iordachescu, Danut and Gomez-Rosas, G. and Rubio-Gonzalez, C. (2010). Induction of Engineered Residual Stresses Fields and Associate Surface Properties Modification by Short Pulse Laser Shock Processing. "Materials Science Forum", v. 638-64 ; pp. 2446-2451. ISSN 1662-9752. https://doi.org/10.4028/www.scientific.net/MSF.638-642.2446.

Morales Furió, Miguel and Molpeceres Álvarez, Carlos Luis and Porro González, Juan Antonio and García Beltrán, Ángel and Ocaña Moreno, José Luis (2010). Numerical Thermo-Mechanical Modelling Of Stress Fields and Residual Constraints in Metallic Targets Subject To Laser Shock Processing. "Materials Science Forum", v. 638-64 ; pp. 2682-2687. ISSN 1662-9752. https://doi.org/10.4028/www.scientific.net/MSF.638-642.2682.

Bergant, Zoran and Grum, Janez and Marko Slabe, Janez and Ocaña Moreno, José Luis (2010). Surface Repair of Tool Made of 12 Ni Maraging Steel by Laser Cladding of NiCoMo Powder. "Advanced Materials Research", v. 89-91 ; pp. 675-680. ISSN 0924-3046. https://doi.org/10.4028/www.scientific.net/AMR.89-91.675.

Ocaña Moreno, José Luis and Morales Furió, Miguel and García-Ballesteros Ramírez, Juan José and Porro González, Juan Antonio and Garcia Garcia, Oscar and Molpeceres Álvarez, Carlos Luis (2009). Laser Shock Microforming of Thin Metal Sheets. "Applied Surface Science", v. 255 (n. 10); pp. 5633-5636. ISSN 1875-3892. https://doi.org/10.1016/j.apsusc.2008.10.084.

Porro González, Juan Antonio and Morales Furió, Miguel and Molpeceres Álvarez, Carlos Luis and Sanchez Perez, Angel M. and Ocaña Moreno, José Luis (2008). Análisis de Tensiones Residuales Inducidas en Aleaciones Metálicas por Tratamientos Superficiales mediante Ondas de Choque Generadas por Láser. "Anales de Ingeniería Mecánica", v. 8 ; pp. 815-820. ISSN 0212-5072.

Blasco Litago, Manuel and García Beltrán, Ángel and Porro González, Juan Antonio and Morales Furió, Miguel and Ocaña Moreno, José Luis (2008). Análisis de la Influencia de los Parámetros Operacionales en Recubrimientos Superficiales Asistidos por Láser de Acero AISI 431 sobre Acero al Carbono. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 251-256. ISSN 0212-5072.

Fernández Robledo, Susana and Lauzurica Santiago, Sara and García-Ballesteros Ramírez, Juan José and Molpeceres Álvarez, Carlos Luis and Guadaño Ayuso, Gonzalo and Allen-Perkins, F. and Ocaña Moreno, José Luis (2008). Avances en la fabricación de células y módulos fotovoltaicos de silicio en capa fina mediante láser. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 295-300. ISSN 0212-5072.

Iordachescu, Mihaela and Georgescu, Bogdan and Iordachescu, Danut and Ocaña Moreno, José Luis (2008). Cold welding on cogged surface. "Anales de Ingeniería Mecánica", v. 16 ; pp. 327-332. ISSN 0212-5072.

Pérez Rodríguez, José Antonio and Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Blasco Litago, Manuel and García Beltrán, Ángel (2008). Diseño de un Sistema de Monitorización y Control de Procesos de Tratamiento Térmico Superficial de Materiales con Láser Mediante Realimentación de Estados. "Anales de Ingeniería Mecánica", v. 1 ; pp. 375-380. ISSN 0212-5072.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Sanchez Perez, Angel M. and Ocaña Moreno, José Luis (2008). Metrología óptica dimensional submicrométrica para determinación de espesores en sub-micro estructuras. "Anales de Ingeniería Mecánica", v. 16 (n. 1); pp. 499-504. ISSN 0212-5072.

Morales Furió, Miguel and Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis and Porro González, Juan Antonio and García y Beltrán, Ángel (2008). Model based optimization criteria for the generation of deep compressive residual stress fields in high elastic limit metallic alloys by ns-laser shock processing. "Surface and Coatings Technology", v. 202 (n. 11); pp. 2257-2262. ISSN 0257-8972. https://doi.org/10.1016/j.surfcoat.2007.12.007.

Morales Furió, Miguel and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and García Beltrán, Ángel and Acebal, Nestor and Ocaña Moreno, José Luis (2008). Optimización de Procesos de Inducción de Tensiones Residuales en Compresión en Materiales Metálicos por Ondas de Choque Generadas por Láser. "Anales de Ingeniería Mecánica", v. 2. Año ; pp. 923-930. ISSN 0212-5072.

Blasco Litago, Manuel and Iordachescu, Danut and Ocaña Moreno, José Luis (2008). Soldadura láser remota de aceros de alto límite elástico. "Anales de Ingeniería Mecánica", v. 16 ; pp. 547-552. ISSN 0212-5072.

García Beltrán, Ángel and Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis (2008). TEMPLUM: A Process Adapted Numerical Simulation Code for The 3D Predictive Assessment of Laser Surface Heat Treatments in Planar Geometry. "Wseas Transactions on Computers", v. 7 (n. 2); pp. 65-74. ISSN 1109-2750.

Garcia Garcia, Oscar and Morales Furió, Miguel and García-Ballesteros Ramírez, Juan José and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and Sanchez Perez, Angel M. and Ocaña Moreno, José Luis (2008). Microconformado de Materiales Metálicos mediante Pulsos Láser en el Dominio de ns. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 505-510. ISSN 0212-5072.

Scutelnicu, Elena and Constantin, Emil and Iordachescu, Mihaela and Ocaña Moreno, José Luis (2008). Naval propellers reconditioning by Friction stir welding ¿ FSW. "The Annals of “Dunarea de Jos” University of Galati", v. 12 ; pp. 9-14. ISSN 1221-4639.

Iordachescu, Danut and Iordachescu, Mihaela and Blasco Litago, Manuel and Ocaña Moreno, José Luis (2008). New Approach on the Cold Welding of Metals: Application to Aluminium Bars. "Anales de Ingeniería Mecánica", v. 16 ; pp. 533-538. ISSN 0212-5072.

Grum, Janez and Zupancic, Martin and Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio (2008). Laser shock processing as a method of decreasing fatigue of a die-casting die made of maraging steel. "Int. J. Microstructure and Materials Properties", v. 3 (n. 2); pp. 271-281. ISSN 1741-8429. https://doi.org/10.1504/IJMMP.2008.018734.

Molpeceres Álvarez, Carlos Luis and García-Ballesteros Ramírez, Juan José and Lauzurica Santiago, Sara and Vicente y Oliva, Jesus de and Ocaña Moreno, José Luis (2008). Micromecanizado Láser de Componentes de Gran calidad de Acabado Superficial. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 511-516. ISSN 0212-5072.

Presentation at Congress or Conference

Ocaña Moreno, José Luis and González Carrasco, J. L. and Lieblich, M. and Galván, J. C. and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Cordovilla Baró, Francisco and Angulo Ramonell, Ignacio and Izaguirre, I. (2018). Laser Shock Processing as an Advanced Technique for the Surface and Mechanical Resistance Properties Modification of Bioabsorbable Magnesium Alloys. In: "THERMEC’2018: 10th International Conference on Processing and Manufacturing of Advanced Materials", July 09 - July 13, 2018, Paris, France. pp. 1-45.

Ocaña Moreno, José Luis (2018). Las Tecnologías de Fabricación Aditiva: oportunidades y retos para la Industria. In: "22ª Jornadas Técnicas de Soldadura y Tecnologías de Unión", 12-14 de junio de 2018, Madrid, España. pp. 1-90.

Ocaña Moreno, José Luis and González Carrasco, J. L. and Lieblich, M. and Angulo Ramonell, Ignacio and Cordovilla Baró, Francisco and Porro González, Juan Antonio and Díaz Muñoz, Marcos (2018). Application of Laser Shock Processing to the Surface and Mechanical Resistance Properties Modification of Bioreabsorbable Magnesium Alloys. In: "7th International Conference on Laser Peening and Related Phenomena (LSP 2018)", 17th-22nd June 2018, Singapore. pp. 1-38.

Gómez-Rosas, G. and Rubio-Gonzalez, C. and García-Torales, G. and Santana-Aranda, M. A. and Pérez-Centeno, A. and Ceja-Andrade, I. and Chávez-Chávez, A. and Gallaga-González, J. and González-Romero, J. R. and Ocaña Moreno, José Luis (2018). Characterization of Plasma Shock Waves and Cavitation Bubbles Produced by a High Energy Laser Pulse through Optical and Electronic Techniques. In: "7th International Conference on Laser Peening and Related Phenomena (LSP 2018)", 17th-22nd June 2018, Singapore. p. 98.

Ocaña Moreno, José Luis and Jagdheesh, Radhakrishnan and Díaz Muñoz, Marcos and Porro González, Juan Antonio and Cordovilla Baró, Francisco and Angulo Ramonell, Ignacio and Huerta Murillo, Daniel and Cardoso, José Teixeira (2018). Direct Generation of Superhydrophobic Microstructures in Metals by UV Laser Sources in the Nanosecond Regime. In: "10th International Laser Symposium and Symposium on Tailored Joining", February 27–28, 2018, Dresden, Germany. pp. 1-35.

Huerta Murillo, Daniel and Aguilar-Morales, A. I. and Alamri, S. and Cardoso, José Teixeira and Jagdheesh, Radhakrishnan and Lasagni, A. F. and Ocaña Moreno, José Luis (2018). Fabrication of multi-scale periodic surface structures on Ti-6Al-4V for modified wettability applications by Direct Laser Writing and Direct Laser Interference Patterning. In: "LASER4FUN project", X, Zaragoza. p. 1.

Petan, L. and Grum, Janez and Ocaña Moreno, José Luis and Sturm, R. (2018). Fatigue Resistance of Maraging Steel after Laser Peening. In: "7th International Conference on Laser Peening and Related Phenomena (LSP 2018)", 17th-22nd June 2018, Singapore. p. 31.

Cordovilla Baró, Francisco and Angulo Ramonell, Ignacio and García Beltrán, Ángel and Ocaña Moreno, José Luis (2018). Modelo numérico para la caracterización termo-fluídica del proceso de Fusión Selectiva por Láser. In: "22as Jornadas Técnicas de Soldadura y Tecnologías de Unión", 12-14 jun 2018, Madrid (España). ISBN 978-8494498022. pp. 1-10.

Ocaña Moreno, José Luis and García Beltrán, Ángel and Angulo Ramonell, Ignacio and Cordovilla Baró, Francisco (2018). Numerical Simulation of Plasma Dynamics and Shock-Induced Residual Stresses in the Laser Shock Processing of Metallic Materials. In: "Workshop. Modelling of Wave Propagation in Solids", 10th December 2018, Praga, República Checa. pp. 1-51.

Ocaña Moreno, José Luis and Angulo Ramonell, Ignacio and Cordovilla Baró, Francisco and García Beltrán, Ángel and Colón, C. and Alonso Medina, Aurelia and Moreno Díaz, Cristina and Langer, K. and Fitzpatrick, M. and Smyth, N. (2018). The Fundamental Role of Laser-Plasma Interaction and Materials Behaviour Models in the Predictive Assessment of Residual Stresses Fields Induced in Metallic Materials by LSP. In: "7th International Conference on Laser Peening and Related Phenomena (LSP 2018)", 17th-22nd June 2018, Singapore. pp. 1-51.

Cordovilla Baró, Francisco and García Beltrán, Ángel and Domíngez, Jesús and Sancho, Paula and Ocaña Moreno, José Luis (2017). Analysis Of The Effect Of Surface Oxidation On The Laser Transformation Hardening Of Cr-mo Steels. In: "CIBEM 2017 - XIII Congresso Ibero-Americano de Engenharia Mecânica", 23-26 Octubre 2017, Lisboa (Portugal). pp. 1-8.

Ocaña Moreno, José Luis and González-Carrasco, J. L. and Lieblich, M. and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Angulo Ramonell, Ignacio and Cordovilla Baró, Francisco and Peral Jiménez, David (2017). Laser Shock Processing for the Enhancement of Mechanical and Surface Properties of Biocompatible Alloys. In: "FiMPART'2017 International Conference on Frontiers in Materials Processing Applications, Research and Technology", 9-12 July, 2017, Bordeaux-France. pp. 1-50.

Cordovilla Baró, Francisco and Garzón, Miguel and Muñoz, Diego Alejandro and Díaz, Javier and García Beltrán, Ángel and Ocaña Moreno, José Luis (2017). A Fluid-Dynamic Numerical Model for the Selective Laser Melting of High-Thickness Metallic Layers. In: "LiM 2017 International conference on Lasers in Manufacturing", 26/29.06.2017, Munich - Germany. pp. 1-10.

Lumbreras, Ángel and Ocaña Moreno, José Luis and Fuentes, Héctor and Gamarra, Javier and Piedra, Dolores de la and Medina, Nieves (2017). Study of the Effect of Laser Marking for Standard Weights. In: "IMEKO TC3, TC5 and TC22 International Conference 2017", May 30, 2017 – June 1, 2017, Helsinki, FINLAND. pp. 1-5.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Angulo Ramonell, Ignacio and Cordovilla Baró, Francisco and Peral Jiménez, David and González-Carrasco, J. L. and Lieblich, M. (2017). Improvement of Fatigue Life and Surface Properties of Metallic Materials of Biomedical Interest by Laser Shock Processing. In: "BRAMAT 2017. 10th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE & ENGINEERING", 8-11 March 2017, BRASOV (Rumanía). pp. 1-56.

Lumbreras Martín, Julio and Ocaña Moreno, José Luis and Fuentes, Héctor and Gamarra, Francisco Javier and Piedra, Dolores de la and Medina, Nieves (2017). Estudio del efecto del marcado láser en pesas patrón.. In: "6º Congreso Español de Metrología", 6-9 de junio de 2017, San Fernando (Cádiz). p. 1.

Ocaña Moreno, José Luis and Jagdheesh, Radhakrishnan and García-Ballesteros Ramírez, Juan José and Cordovilla Baró, Francisco (2017). Generation of Modified Wettability Metallic Surfaces by Short Pulse Lasers. In: "ICIT&APT 2017. 10th International Conference on Industrial Tools and Advanced Processing Technologies", April 24th - 26th 2017, Ljubljana, Slovenia. ISBN 978-961-6692-04-5. pp. 1-4.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and García Beltrán, Ángel and Angulo Ramonell, Ignacio and Cordovilla Baró, Francisco (2017). Laser Shock Processing of Metallic Alloys: Process Overview and Development of Advanced Applications through the Integrated Modelling-Processing-Testing Approach for the Robust Design of Treatments on High-Reliability Components. In: "Laser Applications Conference 2017", 1–5 October 2017, Nagoya, Aichi Japan. ISBN 9780960038077. pp. 1-94.

Li, Chuang and Cordovilla Baró, Francisco and Ocaña Moreno, José Luis (2017). The design of a novel structural four-beams-bossedmembrane (FBBM) piezoresistive pressure sensor. In: "2017 Spanish Conference on Electron Devices (CDE 2017)", 8-10 February 2017, Barcelona (Spain). ISBN 978-1-5090-5073-4. pp. 94-97.

Ruiz de Lara de Luis, Leonardo and Radhakrishnan, Jagdheesh and Ocaña Moreno, José Luis (2016). Corrosion behaviour of Superhydrophobic Aluminium surfaces. In: "XXX International Conference on Surface Modification Technologies (SMT30)", 29th june - 1st july, 2016, Milán (Italia).

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David and Santiago Varela, José Antonio and Angulo Ramonell, Ignacio (2016). Laser shock processing: an emerging technique for the mechanical and surface properties enhancement of metallic materials. In: "The 30th International Conference on Surface Modification Technologies", 29th Jne - 1st July, 2016, Milán (Italy). pp. 1-6.

Moreno Díaz, Cristina and Porro González, Juan Antonio and Alonso Medina, Aurelia and Colón, C. and Ocaña Moreno, José Luis (2015). Alpha-Line Characterization of Electronic Density in Plasmas Generated by Laser Shock Processing. In: "5th International Conference on Laser Peening & Related Phenomena - ICLPRP", May 10-15, 2015, Cincinnati, Ohio, USA. pp. 1-22.

Santiago, J.A. and Ruiz de Lara de Luis, Leonardo and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ocaña Moreno, José Luis (2015). Analysis of induced surface modifications effects on the electrochemical behaviour of LSP-treated metallic alloys. In: "5th International Conference on Laser Peening & Related Phenomena - ICLPRP", May 10-15, 2015, Cincinnati, Ohio, USA. pp. 1-38.

Díaz Rozo, Javier and Bielza Lozoya, María Concepción and Ocaña Moreno, José Luis and Larrañaga Múgica, Pedro María (2015). Development of a Cyber-Physical System based on selective Gaussian naive Bayes model for a self-predict laser surface heat treatment process control. In: "International Conference ML4CPS 2015", 01-02 oCT 2015, Lemgo, Alemania. ISBN 978-3-662-48836-2. pp. 1-8. https://doi.org/10.1007/978-3-662-48838-6_1.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz, M. and Ruiz de Lara de Luis, Leonardo and Correa, C. and Peral, D. (2015). Fatigue life enhancement of high reliability metallic components by laser shock processing. In: "High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications IV Conference", 7-12 February 2015, San Francisco, California, United States. ISBN 9781628414462 ISSN: 0277-786X. pp. 1-6. https://doi.org/10.1117/12.2076125.

Ocaña Moreno, José Luis and Correa Guinea, Carlos and Porro González, Juan Antonio and García Beltrán, Ángel and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David and Cordovilla Baró, Francisco (2015). Induction of Through-Thickness Compressive Residual Stresses and Application to the Mitigation of the Effect of Surface Defects on the Fatigue Life of Thin Metal Plates by LSP. In: "5th International Conference on Laser Peening & Related Phenomena - ICLPRP", May 10-15, 2015, Cincinnati, Ohio, USA. pp. 1-43.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and García Beltrán, Ángel and Santiago Varela, José Antonio and Peral Jiménez, David (2015). Laser Shock Processing: An Advanced Technique for Improving the Surface and Mechanical Properties of Metallic Alloys. In: "Advances in Materials and Processing Technologies Conference (AMPT 2015)", 14-17 diciembre 2015, Madrid (Spain). pp. 1-40.

Jagdheesh, Radhakrishnan and Ocaña Moreno, José Luis and García Ballesteros, Juan J. (2015). One-step generation of ultrahydrophobic aluminum surface patterns by nanosecond lasers. In: "Lasers in Manufacturing Conference - LiM 2015", 22 - 25 junio 2015, Munich - Alemania. pp. 1-9.

Jagdheesh, Radhakrishnan and García Ballesteros, Juan J. and Ocaña Moreno, José Luis (2015). Single step generation of microstructured hydrophobic Aluminium surface by ns laser. In: "4M/ICOMM2015 Conference", 31st March - 2nd April 2015, Milan, Italy. ISBN 978-981-09-4644-9. pp. 349-353.

Ocaña Moreno, José Luis and Diaz Muñoz, Marcos and Porro González, Juan Antonio and Ruiz de Lara de Luis, Leonardo and Correa, C. (2014). Effect of Thermal Treatments on the Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing. In: "THERMEC 2013, 8th International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties Applications", 2/12/2013 - 6/12/2013, Las Vegas, USA. ISBN 978-3-03835-073-6.

Ocaña Moreno, José Luis and Correa Guinea, Carlos and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David (2014). Induction of through-thickness compressive residual stress fields in thin Al2024-T351 plates by laser shock processing. In: "2nd International Conference of the International Journal of Structural Integrity", 1-4 sept. 2014, Funchal, Madeira, Portugal. pp. 1-13.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Correa Guinea, Carlos and García-Ballesteros Ramírez, Juan José and Garcia Garcia, Oscar (2014). Laser Shock Microforming of Thin Metal Sheets: Physical Principles, Modelling and Experimental Implementation. In: "9th International Conference on Industrial Tools and Material Processing Technologies", 9th - 11th April 2014, Ljubljana (Eslovenia). pp. 1-40.

Carreón, H. and Barriuso, S. and Porro González, Juan Antonio and González-Carrasco, J. L. and Ocaña Moreno, José Luis (2014). Thermoelectric assessment of laser peening induced effects on a metallic biomedical Ti6Al4V. In: "Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XIV", ., San Francisco. ISBN 9780819498854. pp..

Ocaña Moreno, José Luis (2013). High Intensity Lasers Application to Advanced Materials Processing: Laser Peening and Related Processes. In: "ELI Beamlines Summer School (ELISS 2013)", 23/06/2013 - 28/06/2013, Prague, Czech Republic.

Ruiz de Lara de Luis, Leonardo and Diaz Muñoz, Marcos and Porro González, Juan Antonio and Correa Guinea, Carlos and Ocaña Moreno, José Luis (2013). Analysis of safety-based incentives in public private partnerships. The case of Spain. In: "4th International Conference on Laser Peening and Related Phenomena", 16/07/2013 - 18/07/2013, Rio de Janeiro, Brasil. pp. 1-13.

Barriuso, S. and Carreón, H. and Porro González, Juan Antonio and González-Carrasco, J. L. and Ocaña Moreno, José Luis (2013). Assessment of laser peening induced effects on Ti6Al4V by non-destructive measurements. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid. pp. 1-6.

Ruiz de Lara de Luis, Leonardo and Diaz Muñoz, Marcos and Porro González, Juan Antonio and Correa Guinea, Carlos and Ocaña Moreno, José Luis (2013). Effect of LSP treatment on the surface topography, friction and wear of Al2024 alloy. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid, Spain. pp. 1-6.

Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Porro González, Juan Antonio and Correa, C. and Ocaña Moreno, José Luis (2013). Effect of Thermal Relaxation on LSP Induced Residual Stresses and Fatigue Life Enhancement of AISI 316L stainless steel. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa, C. and Gil Santos, Andrea and Peral Jiménez, David (2013). Induction of engineered residual stresses fields and enhancement of fatigue life of high reliability metallic components by laser shock processing. In: "International Conference on High-Power Laser Materials Processing - Lasers, Beam Delivery, Diagnostics, and Applications II.", 02/02/2013 - 7/02/2013, San Francisco, California (EE. UU.). ISBN 9780819493729.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Ocaña Moreno, José Luis and Porro González, Juan Antonio and Ruiz Hervías, Jesús (2013). LSP Influence on Mechanical Properties of Thin Dissimilar Laser Welded Joints. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Garcia Garcia, Oscar and Porro González, Juan Antonio and Correa Guinea, Carlos and García-Ballesteros Ramírez, Juan José (2013). Laser Shock Micro-Forming as an Emerging Technique for Microsystems Shaping and Adjustment. In: "4M2013 Conference. 10th International Conference on Multi-Material Micro Manufacture", 08/10/2013-10/10/2013, San Sebastián, España. ISBN 978-981-07-7248-2.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Correa Guinea, Carlos and Morales Furió, Miguel and García-Ballesteros Ramírez, Juan José (2013). Laser Shock Microforming of Thin Metal Sheets with Q-Switched ns Lasers. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

Correa Guinea, Carlos and Morales Furió, Miguel and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David and Ocaña Moreno, José Luis (2013). Numerical prediction of residual stresses fields induced in thin Al2024-T351 sheets by laser shock processing. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid, Spain. pp. 1-6.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos and Gil Santos, Andrea (2012). Application of high-intensity short-pulse lasers to the mechanical and surface properties improvement of high reliability metallic components by shock processing. In: "VII Internacional Conference BT/LA", 18/09/2012-21/09/2012, Saint Petersburg, Russia.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2012). Laser shock processing: an emerging technique for the improvement of fatigue life and surface properties of high reliability metallic components. In: "4th International Conference on Materials Science and Technologies (ROMAT 2012)", 17/10/2012 -19/10/2012, Bucharest, Romania.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Luzin, V. and Ruiz Hervías, Jesús and Ocaña Moreno, José Luis (2012). Overall and local mechanical behaviour of dissimilar laser welded joints. In: "XXIX Encuentro del Grupo Español de Fractura", 21/03/2012 - 23/03/2012, Bilbao (España).

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Correa Guinea, Carlos and Colón Hernández, Cristóbal and Alonso Medina, Aurelia and Autric, Michele L. (2012). Physical characterization of laser interaction and shock generation in laser processing: coupled theoretical-experimental analysis. In: "International High Power Laser Ablation Conference (HPLA2012)", 30/04/2012 - 03/05/2014, Santa Fe, NM, USA.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Correa Guinea, Carlos and Colón Hernández, Cristóbal and Alonso Medina, Aurelia and Autric, Michele L. (2012). Physical characterization of laser interaction and shock generation in laser shock processing: coupled theoretical-experimental analysis. In: "Unspecified. pp. 209-218. https://doi.org/10.1063/1.4739875.

Iordachescu, Danut and Porro González, Juan Antonio and Iordachescu, Mihaela and Ruiz Hervías, Jesús and Ocaña Moreno, José Luis and Vilaca, Pedro (2011). Characterization Of Friction Stir Welded Joints Of Aa 2024-T351 - Native Vs. Treated By Laser Shock Processing. In: "7 th International Conference on Materials Science & Engineering – BRAMAT 2011", 24/02/2011 - 26/02/2011, Poiana Brasov, Rumania. pp. 63-66.

Iordachescu, Danut and Blasco Litago, Manuel and López, Raul and Cuesta Arranz, Alberto and Iordachescu, Mihaela and Ocaña Moreno, José Luis (2011). Development of Robotized Laser Welding Applications for Joining Thin Sheets. In: "Proceedings of the 6th edition of International Conference on Optimization of the Robots and Manipulators OPTIROB 2011", 26/05/2011 - 28/05/2011, Sinaia, Romania.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2011). Improvement of Mechanical Properties and Life Extension of High Reliability Structural Components by Laser Shock Processing. In: "Eco-Photonics 2011", 28/03/2011 - 30/03/2011, Estrasburgo, Francia.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and García-Ballesteros Ramírez, Juan José and Correa Guinea, Carlos (2011). Laser Shock Microformingof Thin Metal Sheets with ns Lasers. In: "Sixth International WLT Conference on Lasers in Manufacturing", 23/05/2011 - 26/05/2011, Munich, Alemania. https://doi.org/10.1016/j.phpro.2011.03.123.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos and Gil Santos, Andrea (2011). Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys. In: "8th international Conference on Industrial Tools and material Processing Technologies", 02/10/2011 - 05/10/2011, Ljubljana, Eslovenia.

Ivetic, G. and Meneghin, I. and Troiani, E. and Molinari, G. and Lanciotti, A. and Ocaña Moreno, José Luis and Ristori, V. and Morales Furió, Miguel and Porro González, Juan Antonio and Plaisier, J. and Lausi, A. (2011). The Effect of Sequence of Operations on Fatigue Life of LSP Treated Open-hole Aluminium Specimens. In: "3rd International Conference on Laser Peening", 11/10/2011 - 14/10/2011, Osaka, Japón.

Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Holgado Bolaños, Miguel and García-Ballesteros Ramírez, Juan José and Lauzurica Santiago, Sara and Porro González, Juan Antonio and Garcia Garcia, Oscar and Iordachescu, Danut (2009). Application of high intensity short pulse lasers to precision micromanufacturing. In: "Conference “Diaspora in Cercetarea Stiintifica si Invatamantul Superior din Romania", 17/09/2008-19/09/2008, Bucarest, Rumania.

Iordachescu, Danut and Birsan, Dan and Iordachescu, Mihaela and Ocaña Moreno, José Luis and Porro González, Juan Antonio (2009). FEM model and experiments for friction stir spot welding of AA6061-T4. In: "8th International Conference on Trends in Welding Research 2008", 01/06/2008-06/06/2008, Pine Mountain, Georgia (EE.UU.). ISBN 978-1-615-03002-6.

Ocaña Moreno, José Luis and García Beltrán, Ángel and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and González González, José Manuel and Blasco Litago, Manuel (2008). Diseño y desarrollo de un laboratorio virtual de aplicaciones industriales con láser. In: "INECE'08 - II Jornadas internacionales U.P.M. sobre Innovación Educativa y Convergencia Europea", 09/12/2008-11/12/2008, Madrid, España. ISBN 978-84-691-9885-8. pp. 1-15.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Ocaña Moreno, José Luis (2008). Optimization of interferometric photonic cells for biochemical sensing based on advanced high sensitivity optical techniques. In: "1ª Conferencia Española de Nanofotónica (CEN2008)", 02/04/2008-04/04/2008, Tarragona. pp. 151-152.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Molpeceres Álvarez, Carlos Luis and Porro González, Juan Antonio and Iordachescu, Danut (2008). Predictive assessment of plasma dynamics effects on the shock transformation of metallic alloys by laser shock processing. In: "International Conference. Modern Laser Applications. Indlas 2008", 20/05/2008-23/05/2008, Bran, Rumania.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and García Beltrán, Ángel (2008). Scientific and Technological Issues on the Application of High Intensity Lasers to Material Properties Modification: The case of Laser Shock Processing of Metallic Alloys. In: "International Conference Extreme Light Infraestructure", 16/09/2008-18/09/2008, Bucarest, Rumania.

Iordachescu, Danut and Iordachescu, Mihaela and Planas Rosselló, Jaime and Ocaña Moreno, José Luis and Blasco Litago, Manuel (2008). Strain-Hardness Correlation in Aluminium Butt Cold Welded Joints. In: "Safety and reliability of welded components in energy and processing industry (International conference)", 10/07/2008-11/07/2008, Graz, Austria. ISBN 978-3-85125-019-0.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and Lavin Hueros, Alvaro and Angulo Barrios, Carlos and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Ocaña Moreno, José Luis (2008). Vertical resonant microcativites based on pillars analyzed by beam profile ellipsometry and reflectometry. In: "XXII Eurosensors (2008)", 07/09/2008-10/09/2008, Dresden (Alemania). ISBN 978-3-00-025217-4. pp. 1577-1580.

Iordachescu, Mihaela and Scutelnicu, Elena and Iordachescu, Danut and Ocaña Moreno, José Luis (2008). Welding in solid state. In: "1er Congreso Internacional de Soldadura y Tecnologías de Unión", 07/10/2008-09/10/2008, Madrid, España. ISBN 978-84-934316-4-8.

  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM