Items where author is "Ruiz de Lara de Luis, Leonardo"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 22.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and García Beltrán, Ángel and Santiago, J.A. and Peral Jiménez, David (2017). Improvement of surface and mechanical properties of high strength metallic alloys by laser shock processing. "Advances in Materials and Processing Technologies", v. 3 (n. 1); pp. 12-22. ISSN 2374-068X. https://doi.org/10.1080/2374068X.2016.1247241.

Ruiz de Lara de Luis, Leonardo and Radhakrishnan, Jagdheesh and Ocaña Moreno, José Luis (2016). Corrosion behaviour of Superhydrophobic Aluminium surfaces. In: "XXX International Conference on Surface Modification Technologies (SMT30)", 29th june - 1st july, 2016, Milán (Italia).

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David and Santiago Varela, José Antonio and Angulo Ramonell, Ignacio (2016). Laser shock processing: an emerging technique for the mechanical and surface properties enhancement of metallic materials. In: "The 30th International Conference on Surface Modification Technologies", 29th Jne - 1st July, 2016, Milán (Italy). pp. 1-6.

Santiago, J.A. and Ruiz de Lara de Luis, Leonardo and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ocaña Moreno, José Luis (2015). Analysis of induced surface modifications effects on the electrochemical behaviour of LSP-treated metallic alloys. In: "5th International Conference on Laser Peening & Related Phenomena - ICLPRP", May 10-15, 2015, Cincinnati, Ohio, USA. pp. 1-38.

Ruiz de Lara de Luis, Leonardo (2015). Desarrollo de métodos para la evaluación integrada de propiedades mecánicas y superficiales inducidas en materiales metálicos mediante tratamiento superficial por ondas de choque generadas por láser. Thesis (Doctoral), E.T.S.I. Industriales (UPM).

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz, M. and Ruiz de Lara de Luis, Leonardo and Correa, C. and Peral, D. (2015). Fatigue life enhancement of high reliability metallic components by laser shock processing. In: "High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications IV Conference", 7-12 February 2015, San Francisco, California, United States. ISBN 9781628414462 ISSN: 0277-786X. pp. 1-6. https://doi.org/10.1117/12.2076125.

Ocaña Moreno, José Luis and Correa Guinea, Carlos and Porro González, Juan Antonio and García Beltrán, Ángel and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David and Cordovilla Baró, Francisco (2015). Induction of Through-Thickness Compressive Residual Stresses and Application to the Mitigation of the Effect of Surface Defects on the Fatigue Life of Thin Metal Plates by LSP. In: "5th International Conference on Laser Peening & Related Phenomena - ICLPRP", May 10-15, 2015, Cincinnati, Ohio, USA. pp. 1-43.

Ocaña Moreno, José Luis and Correa Guinea, Carlos and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David (2015). Induction of through-thickness compressive residual stress fields in thin Al2024-T351 plates by laser shock processing. "International Journal of Structural Integrity", v. 6 (n. 6); pp. 725-736. ISSN 1757-9864. https://doi.org/10.1108/IJSI-10-2014-0051.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and García Beltrán, Ángel and Santiago Varela, José Antonio and Peral Jiménez, David (2015). Laser Shock Processing: An Advanced Technique for Improving the Surface and Mechanical Properties of Metallic Alloys. In: "Advances in Materials and Processing Technologies Conference (AMPT 2015)", 14-17 diciembre 2015, Madrid (Spain). pp. 1-40.

Ocaña Moreno, José Luis and Diaz Muñoz, Marcos and Porro González, Juan Antonio and Ruiz de Lara de Luis, Leonardo and Correa, C. (2014). Effect of Thermal Treatments on the Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing. In: "THERMEC 2013, 8th International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties Applications", 2/12/2013 - 6/12/2013, Las Vegas, USA. ISBN 978-3-03835-073-6.

Ocaña Moreno, José Luis and Díaz, M. and Porro González, Juan Antonio and Ruiz de Lara de Luis, Leonardo and Correa, C. (2014). Effect of Thermal Treatments on the Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing. "Materials Science Forum", v. 783-86 (n. null); pp. 2376-2381. ISSN 0255-5476. https://doi.org/10.4028/www.scientific.net/MSF.783-786.2376.

Ocaña Moreno, José Luis and Correa Guinea, Carlos and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David (2014). Induction of through-thickness compressive residual stress fields in thin Al2024-T351 plates by laser shock processing. In: "2nd International Conference of the International Journal of Structural Integrity", 1-4 sept. 2014, Funchal, Madeira, Portugal. pp. 1-13.

Ruiz de Lara de Luis, Leonardo and Diaz Muñoz, Marcos and Porro González, Juan Antonio and Correa Guinea, Carlos and Ocaña Moreno, José Luis (2013). Analysis of safety-based incentives in public private partnerships. The case of Spain. In: "4th International Conference on Laser Peening and Related Phenomena", 16/07/2013 - 18/07/2013, Rio de Janeiro, Brasil. pp. 1-13.

Ruiz de Lara de Luis, Leonardo and Diaz Muñoz, Marcos and Porro González, Juan Antonio and Correa Guinea, Carlos and Ocaña Moreno, José Luis (2013). Effect of LSP treatment on the surface topography, friction and wear of Al2024 alloy. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid, Spain. pp. 1-6.

Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Porro González, Juan Antonio and Correa, C. and Ocaña Moreno, José Luis (2013). Effect of Thermal Relaxation on LSP Induced Residual Stresses and Fatigue Life Enhancement of AISI 316L stainless steel. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa, C. and Gil Santos, Andrea and Peral Jiménez, David (2013). Induction of engineered residual stresses fields and enhancement of fatigue life of high reliability metallic components by laser shock processing. In: "International Conference on High-Power Laser Materials Processing - Lasers, Beam Delivery, Diagnostics, and Applications II.", 02/02/2013 - 7/02/2013, San Francisco, California (EE. UU.). ISBN 9780819493729.

Correa Guinea, Carlos and Morales Furió, Miguel and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David and Ocaña Moreno, José Luis (2013). Numerical prediction of residual stresses fields induced in thin Al2024-T351 sheets by laser shock processing. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid, Spain. pp. 1-6.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos and Gil Santos, Andrea (2012). Application of high-intensity short-pulse lasers to the mechanical and surface properties improvement of high reliability metallic components by shock processing. In: "VII Internacional Conference BT/LA", 18/09/2012-21/09/2012, Saint Petersburg, Russia.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2012). Laser shock processing: an emerging technique for the improvement of fatigue life and surface properties of high reliability metallic components. In: "4th International Conference on Materials Science and Technologies (ROMAT 2012)", 17/10/2012 -19/10/2012, Bucharest, Romania.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2012). Mechanical properties enhancement of high reliability metallic materials by laser shock processing. "Materials Science Forum", v. 706-70 ; pp. 2565-2570. ISSN 0255-5476. https://doi.org/10.4028/www.scientific.net/MSF.706-709.2565.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2011). Improvement of Mechanical Properties and Life Extension of High Reliability Structural Components by Laser Shock Processing. In: "Eco-Photonics 2011", 28/03/2011 - 30/03/2011, Estrasburgo, Francia.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos and Gil Santos, Andrea (2011). Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys. In: "8th international Conference on Industrial Tools and material Processing Technologies", 02/10/2011 - 05/10/2011, Ljubljana, Eslovenia.

  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM