Items where author is "Sanz Lobera, Alfredo"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 24.

Article

Sanz Lobera, Alfredo and López Rodrigo, Daniel and López Baos, Andrés and Lozano, Fermín and Paricio, Ignacio (2017). Some considerations about the development of software measurement standards in surface finish. "International Journal of Mechatronics and Manufacturing Systems", v. 10 (n. 2); pp. 130-151. ISSN 1753-1047. https://doi.org/10.1504/IJMMS.2017.084797.

Sanz Lobera, Alfredo and González, Ignacio and Calvo Narvaez, Felix and Andres, Eva María (2017). Some examples for the automatic generation of self-assessment queries in manufacturing processes engineering subjects. "Materials Science Forum", v. 903 ; pp. 24-31. ISSN 1662-9752. https://doi.org/10.4028/www.scientific.net/MSF.903.24.

Casado Corpas, José and Sanz Lobera, Alfredo and González Requena, Ignacio and Sevilla, L. (2016). A revision of the flutter margin method to predict in real-time the limit cycle oscillations onset speed with structural freeplay present in the plunge axis. "Proceedings of the Institution of Mechanical Engineers : Journal of Aerospace Engineering", v. 231 (n. 1); pp. 124-142. ISSN 0954-4100. https://doi.org/10.1177/0954410016638867.

Alonso Rodrigo, Gustavo and Sanz Lobera, Alfredo and Meseguer Ruiz, José (2012). Hysteresis phenomena in transverse galloping of triangular cross-section bodies. "Journal of Fluids And Structures", v. 33 ; pp. 243-251. ISSN 0889-9746. https://doi.org/10.1016/j.jfluidstructs.2012.04.008.

Fernández, R. and Sanz Lobera, Alfredo and Pindado Carrion, Santiago and Núñez, P. (2012). Effect of the Reference Line on Main Roughness Parameters. "Advanced Materials Research", v. 498 ; pp. 73-78. ISSN 1022-6680. https://doi.org/10.4028/www.scientific.net/AMR.498.73.

Pindado Carrion, Santiago and Sanz Lobera, Alfredo and Wery, Alain (2012). Deviation of Cup and Propeller Anemometer Calibration Results with Air Density. "Energies", v. 5 ; pp. 683-701. ISSN 1996-1073.

Arenas Reina, José Manuel and Alia, Cristina and Blaya Haro, Fernando and Sanz Lobera, Alfredo (2011). Multi-criteria selection of structural adhesives to bond ABS parts obtained by rapid prototyping. "International Journal of Adhesion And Adhesives", v. 33 ; pp. 67-74. ISSN 0143-7496. https://doi.org/10.1016/j.ijadhadh.2011.11.005.

Sanz Lobera, Alfredo and Gonzalez Requena, Ignacio and Castejon Rosauro, Agustin and Casado Corpas, José (2011). Using Virtual Reality in the teaching of manufacturing processes with material removal in CNC Machine-Tools. "Materials Science Forum", v. 692 ; pp. 112-119. ISSN 0255-5476.

Presentation at Congress or Conference

Sánchez Almirón, Borja and Aguirre Cebrian, Maria Vega and Calvo Narvaez, Felix and González Requena, Ignacio and Sanz Lobera, Alfredo (2014). Estudio de la maquinabilidad de aleaciones de aluminio-cobre. In: "XXII Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas (XXII CUIEET)", 17-19 Sept 2014, Almadén, España. ISBN 978-84-9044-108-4.

Villeta, M. and Rubio, E.M. and Sanz Lobera, Alfredo and Sevilla, L. (2011). An Alternative Method to Achieve Metrological Confirmation in Measurement Processes. In: "4th Manufacturing Engineering Society International Conference", 21/09/2011 - 23/09/2011, Cádiz, España. p. 8.

Gomez Parra, A. and Sanz Lobera, Alfredo and Marcos Barcena, M. (2011). Análisis Preliminar de la Influencia del Proceso de Torneado en la vida a fatiga de la Aleación de Aluminio UNS A92024-T351. In: "4th Manufacturing Engineering Society International Conference", 21/09/2011 - 23/09/2011, Cádiz, España. p. 8.

Sanz Lobera, Alfredo and Guimerans, M. and Gonzalez, I. and Pérez, J. (2011). Comparative Analysis of Tolerances Allocation in Mechanical Assemblies based on Cost-tolerance Curves. In: "4th Manufacturing Engineering Society International Conference", 21/09/2011 - 23/09/2011, Cádiz, España. p. 8.

Sanz Lobera, Alfredo and Villeta, M. and Sebastian, Miguel Angel (2011). Considerations in Determining the Cost of Measurement Uncertainty Associated with Dimensional Tolerances Verification. In: "4th Manufacturing Engineering Society International Conference", 21/09/2011 - 23/09/2011, Cádiz, España. p. 8.

Sanz Lobera, Alfredo and Olarrea Busto, Jose and Lapuerta González, María Victoria (2011). Considerations on the success rate in aeronautical engineering studies in Spain. In: "Research in Engineering Education Symposium 2011 (REES 2011)", 04/10/2011 - 07/10/2011, Madrid, España. pp. 678-685.

Garcia Plaza, E. and Nuñez, P.J. and Martin, A.R. and Sanz Lobera, Alfredo (2011). Control adaptativo del acabado superficial en la de procesos de torneado automatizados. In: "4th Manufacturing Engineering Society International Conference", 21/09/2011 - 23/09/2011, Cádiz, España. pp. 21-23.

Sanz Lobera, Alfredo and Fernández, R. and Pindado Carrion, Santiago and Nuñez, P.J. (2011). Estudio de la influencia del sistema de referencia en la evaluación de parámetros de acabado superficial. In: "4th Manufacturing Engineering Society International Conference", 21/09/2011 - 23/09/2011, Cádiz, España. p. 8.

Olarrea Busto, Jose and Lapuerta González, María Victoria and Sanz Lobera, Alfredo (2011). Estudio sobre la valoracion de alumnos de ingenieria acerca de distintos metodos de evaluacion. In: "8º Simposium Iberoamericano en Educacion, Cibernetica e Informatica: SIECI 2011", 19/07/2011 - 22/07/2011, Orlando, Florida, EEUU. pp. 1-6.

Sanz Lobera, Alfredo (2011). Imparticion de Practicas de Laboratorio en Escuelas Tecnicas con Alto Numero de Alumnos. In: "8º Simposium Iberoamericano en Educacion, Cibernetica e Informatica: SIECI 2011", 19/07/2011 - 22/07/2011, Orlando, Florida, EEUU. p. 6.

Gómez, A. and Sanz Lobera, Alfredo and Salguero, J. and Rubio, E. and Marcos, M. (2011). Influence of the Lubrication Conditions on the Surface Finish of Turned Aeronautical Aluminium Alloys. A preliminary Study. In: "Proceedings of the 4th International Congress on Energy and Environment Engineering and Management (CIIEM)", 25/05/2011 - 27/05/2011, Merida. pp. 212-216.

Sanz Lobera, Alfredo and Gonzalez Roig, Alfredo and Gonzalez Requena, Ignacio (2011). Methodology for automated generation of multiple choice questions in self assessment. In: "Research in Engineering Education Symposium 2011 (REES 2011)", 04/10/2011 - 07/10/2011, Madrid, España. pp. 61-69.

Sanz Lobera, Alfredo and Arenas Reina, José Manuel and Sebastian, Miguel Angel (2011). Modelo de estimación de costes para tolerancias de diseño en la ingeniería de los procesos de producción. In: "XV Congreso Internacional de Ingeniería de Proyectos", 06/07/2011 - 08/07/2011, Huesca, España. p. 14.

Sanz Lobera, Alfredo and Fernández, R. and Pindado Carrion, Santiago and Núñez, P. (2011). Study of the Influence of Reference System in Surface Finishing Parameters Evaluation.. In: "4th Manufacturing Engineering Society International Conference, MESIC 2011", 21/09/2011 - 23/09/2011, Cádiz, España.

Ramirez Garrido, Julio and Burgos, J. de and Hilario, J. and Mancebo, Francisco J. and Lapuerta González, María Victoria and Sanz Lobera, Alfredo and Salom, C. and González Prolongo, Margarita and Gonzales-Hernández, M.A. and Olarrea Busto, Jose and Asensio, M. and Pascual, E. and Vázquez, C. and Ramis Abril, Rafael and Sagredo, J. L. and Fernandez Jimenez, Consuelo and Alcazar de Velasco Rico, Angel Manuel (2008). Evaluación frecuente, mentorías y rendimiento académico en el programa mentor de Aeronáuticos. In: "II Jornadas Internacionales UPM sobre Innovacion Educativa y Convergencia Europea 2008 (INECE'08)", 09/12/2008-11/12/2008, Madrid, España. ISBN 978-84-691-9885-8.

Sanz Andres, Angel Pedro and Perales Perales, José Manuel and Rodríguez de Francisco, Pablo and Sanz Lobera, Alfredo (1990). A Plateau Tank Facility (PTF) for Liquid Bridge Experimentation by Using Buoyancy Technique for Microgravity Simulation. In: "7th European symposium on Materials and fluid sciences in microgravity", 10/09/1989-15/09/1989, Oxford, UK. ISBN 9789290920229.

  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM