Fracture behaviour of notched round bars made of PMMA subjected to torsion at -60 °C

Berto, F., Cendón Franco, David Ángel ORCID: https://orcid.org/0000-0001-7256-0814, Lazzarin, P. and Elices Calafat, Manuel (2013). Fracture behaviour of notched round bars made of PMMA subjected to torsion at -60 °C. "Engineering fracture mechanics", v. 102 ; pp. 271-287. ISSN 0013-7944. https://doi.org/10.1016/j.engfracmech.2013.02.011.

Description

Title: Fracture behaviour of notched round bars made of PMMA subjected to torsion at -60 °C
Author/s:
Item Type: Article
Título de Revista/Publicación: Engineering fracture mechanics
Date: April 2013
ISSN: 0013-7944
Volume: 102
Subjects:
Faculty: E.T.S.I. Caminos, Canales y Puertos (UPM)
Department: Ciencia de los Materiales
Creative Commons Licenses: Recognition - No derivative works - Non commercial

Full text

[thumbnail of INVE_MEM_2013_163160.pdf]
Preview
PDF - Requires a PDF viewer, such as GSview, Xpdf or Adobe Acrobat Reader
Download (7MB)

Abstract

This paper presents seventy new experimental results from PMMA notched specimens
tested under torsion at 60 C. The notch root radius ranges from 0.025 to 7.0 mm. At this
temperature the non-linear effects previously observed on specimens of the same material
tested at room temperature strongly reduce.
The averaged value of the strain energy density over a control volume is used to assess
the critical loads to failure. The radius of the control volume and the critical strain energy
density are evaluated a priori by using in combination the mode III critical stress intensity
factor from cracked-like specimens and the critical stress to failure detected from semicircular
notches with a large notch root radius

More information

Item ID: 26297
DC Identifier: https://oa.upm.es/26297/
OAI Identifier: oai:oa.upm.es:26297
DOI: 10.1016/j.engfracmech.2013.02.011
Official URL: http://www.sciencedirect.com/science/article/pii/S...
Deposited by: Memoria Investigacion
Deposited on: 23 May 2014 07:28
Last Modified: 16 May 2018 14:26
  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM