Items where author is "Pastor Caño, Jose Ignacio"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 63.

Article

Tejado Garrido, Elena María and Prado Escudero, Javier de and Tarancón Román, Sandra and Sánchez Martínez, María and Martín Sanz, Antonia and Pastor Caño, Jose Ignacio and Ureña Fernández, Alejandro (2020). Thermomechanical Characterisation of W-Eurofer 97 Brazed Joints. "Journal of Nuclear Materials", v. 542 ; p. 152504. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2020.152504.

Richou, M. and Gallay, F. and Böswirth, B. and Chu, I. and Dose, G. and Greuner, H. and Kermouche, G. and Lenci, M. and Loewenhoff, Th. and Maestracci, R. and Meillot, E. and Missirlian, M. and Pastor Caño, Jose Ignacio and Quet, A. and Roccella, S. and Tejado Garrido, Elena María and Wirtz, M. and Visca, E. and Pintsuk, G. and You, J.H. (2020). Performance Assessment of Thick W/Cu Graded Interlayer for DEMO Divertor Target. "Fusion Engineering and Design", v. 157 ; p. 111610. ISSN 0920-3796. https://doi.org/10.1016/j.fusengdes.2020.111610.

Novak, Sasa and Kocen, Matej and Sestan Zavasnik, Andreja and Galatanu, Andrei and Galatanu, Magdalena and Tarancón Román, Sandra and Tejado Garrido, Elena María and Pastor Caño, Jose Ignacio and Jenus, Petra (2020). Beneficial Effects of a WC Addition in FAST-Densified Tungsten. "Materials Science and Engineering: A", v. 772 ; p. 138666. ISSN 0921-5093. https://doi.org/10.1016/j.msea.2019.138666.

Tejado Garrido, Elena María and Martín Sanz, Antonia and Pastor Caño, Jose Ignacio (2018). Effect of Ti and TiC Alloyants on the Mechanical Properties of W-Based Armour Materials. "Journal of Nuclear Materials", v. 514 ; pp. 238-246. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2018.12.001.

Ureña, Julia and Tejado Garrido, Elena María and Pastor Caño, Jose Ignacio and Velasco, F. and Tsipas, Sofía A. and Jiménez-Morales, A. and Gordo, E. (2018). Role of Beta-Stabilizing Elements on the Microstructure and Mechanical Properties Evolution of Modified PM Ti Surfaces Designed for Biomedical Applications. "Powder Metallurgy" ; pp. 1-10. ISSN 1743-2901. https://doi.org/10.1080/00325899.2018.1426185.

Müller, A. V. and Ewert, D. and Galatanu, A. and Milwich, M and Neu, R. and Pastor Caño, Jose Ignacio and Siefken, U. and Tejado Garrido, Elena María and You, J.H. (2017). Melt infiltrated tungsten–copper composites as advanced heat sink materials for plasma facing components of future nuclear fusion devices. "Fusion Engineering and Design" ; pp. 1-5. ISSN 0920-3796. https://doi.org/10.1016/j.fusengdes.2017.01.042.

Calvo, A. and Ordás, N. and Iturriza, I. and Pastor Caño, Jose Ignacio and Tejado Garrido, Elena María and Palacios García, Teresa and García-Rosales, C. (2016). Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes. "Physica Scripta", v. 2016 (n. T167); pp. 1-6. ISSN 0031-8949. https://doi.org/10.1088/0031-8949/T167/1/014041.

Tejado Garrido, Elena María and Carvalho, P.A. and Muñoz, A. and Dias, M. and Correia, J.B. and Mardolcar, U.V. and Pastor Caño, Jose Ignacio (2015). The effects of tantalum addition on the microtexture and mechanical behaviour of tungsten for ITER applications. "Journal of Nuclear Materials", v. 467 ; pp. 949-955. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2015.10.034.

Martin Sanz, Antonia and Pastor Caño, Jose Ignacio and Palomo, Ángel and Fernández Jiménez, A. (2015). Mechanical behaviour at high temperature of alkali-activated aluminosilicates (geopolymers). "Construction and Building Materials" (n. 93); pp. 1188-1196. ISSN 0950-0618. https://doi.org/10.1016/j.conbuildmat.2015.04.044.

Palacios García, Teresa and Reiser, J. and Hoffmann, J. and Rieth, M. and Hoffmann, A. and Pastor Caño, Jose Ignacio (2015). Microstructural and mechanical characterization of annealed tungsten (W) and potassium-doped tungsten foils. "International Journal of Refractory Metals and Hard Materials", v. 48 ; pp. 145-149. ISSN 0263-4368. https://doi.org/10.1016/j.ijrmhm.2014.09.005.

Orellana Pérez, T. and Tejado Garrido, Elena María and Funke, V.C. and Fütterer, W. and Riepe, S. and Möller, H.J. and Pastor Caño, Jose Ignacio (2015). How do Impurity Inclusions Influence the Mechanical Properties of Multicrystalline Silicon?. "International Journal of Metallurgical & Materials Engineering", v. 1 ; pp. 1-11. ISSN 2455-2372. https://doi.org/10.15344/2455-2372/2015/101.

Muñoz, A. and Savoini, B. and Tejado Garrido, Elena María and Monge, M.A. and Pastor Caño, Jose Ignacio and Pareja, R. (2014). Microstructural and mechanical characteristics of W-2Ti and W-1TiC processed by hot isostatic pressing. "Journal of Nuclear Materials", v. 455 (n. 1-3); pp. 306-310. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2014.06.064.

Palacios García, Teresa and Jiménez, A. and Muñoz, A. and Monge, M.A. and Ballesteros, C. and Pastor Caño, Jose Ignacio (2014). Mechanical characterisation of tungsten-1wt.% yttrium oxide as a function of temperature and atmosphere. "Journal of Nuclear Materials", v. 454 ; pp. 455-461. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2014.09.012.

Konstantopoulou, Konstantina and Shi, Yunhua and Dennis, Anthony and Durrell, John and Pastor Caño, Jose Ignacio and Cardwell, David (2014). Mechanical characterization of GdBCO/Ag and YBCO single grains fabricated by top-seeded melt growth at 77 and 300 K. "Superconductor Science and Technology", v. 27 (n. 11); pp. 115011-115021. ISSN 0953-2048. https://doi.org/10.1088/0953-2048/27/11/115011.

Gordillo Garcia, Nuria and Panizo Laíz, Miguel and Tejado Garrido, Elena María and Fernández-Martínez, I. and Rivera, A. and Pastor Caño, Jose Ignacio and Gómez de Castro, C. and Río, J. del and Perlado Martín, José Manuel and González Arrabal, Raquel (2014). Morphological and microstructural characterization of nanostructured pure a-phase W coatings on a wide thickness range. "Applied Surface Science", v. 316 ; pp. 1-8. ISSN 0169-4332. https://doi.org/10.1016/j.apsusc.2014.07.061.

Konstantopoulou, Konstantina and Roa, J. J. and Jiménez Piqué, E. and Segarra, M. and Pastor Caño, Jose Ignacio (2014). Fracture micromechanisms and mechanical behavior of YBCO bulk superconductors at 77 and 300 K. "Ceramics International", v. 40 (n. 8); pp. 12797-12806. ISSN 0272-8842. https://doi.org/10.1016/j.ceramint.2014.04.134.

Mesa, M.C. and Oliete Terraz, Patricia Beatriz and Pastor Caño, Jose Ignacio and Martin Sanz, Antonia and Llorca Martinez, Francisco Javier (2014). Mechanical properties up to 1900 K of Al2O3/Er3Al5O12/ZrO2 eutectic ceramics grown by the laser floating zone method. "Journal of the European Ceramic Society", v. 34 (n. 9); pp. 2081-2087. ISSN 0955-2219. https://doi.org/10.1016/j.jeurceramsoc.2013.11.013.

Orellana Pérez, T. and Tejado Garrido, Elena María and Funke, V.C. and Riepe, S. and Pastor Caño, Jose Ignacio and Möller, H.J. (2014). Influence of high aluminium content on the mechanical properties of directionally solidified multicrystalline silicon. "Journal of Materials Science", v. 49 (n. 14); pp. 4905-4918. ISSN 0022-2461. https://doi.org/10.1007/s10853-014-8192-5.

Barra Arias, Enrique and Aguirre Herrera, Sandra and Pastor Caño, Jose Ignacio and Quemada Vives, Juan (2014). Using multimedia and peer assessment to promote collaborative e-learning. "New Review of Hypermedia and Multimedia" ; pp. 1-21. ISSN 1361-4568. https://doi.org/10.1080/13614568.2013.857728.

Palacios García, Teresa and Pastor Caño, Jose Ignacio and Aguirre Cebrian, Maria Vega and Martin Sanz, Antonia and Monge, M. A. and Muñoz, A. and Pareja, R. (2013). Mechanical behavior of tungsten-vanadium-lanthana alloys as function of temperature. "Journal of nuclear materials", v. 442 (n. 1-3, S); pp.. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2013.02.006.

Pastor Caño, Jose Ignacio and Martin Sanz, Antonia and Molina Aldareguía, Jon M. and Llorca Martinez, Francisco Javier and Oliete Terraz, Patricia Beatriz and Larrea, Angel and Peña Torre, José Ignacio and Orera, V.M. and Arenal, Raúl (2013). Superplastic deformation of directionally solidified nanofibrillar Al2O3-Y3Al5O12-ZrO2 eutectics. "Journal of the European Ceramic Society", v. 33 (n. 13-14); pp. 2579-2586. ISSN 0955-2219. https://doi.org/10.1016/j.jeurceramsoc.2013.03.033.

Zhao, Y. and Konstantopoulou, Konstantina and Wulff, A. C. and Tang, X. and Tian, H. and Suo, H. L. and Pastor Caño, Jose Ignacio and Grivel, J.-C. (2013). Development of One Meter Long Double-Sided CeO2 Buffered Ni-5at.W Templates by Reel-to-Reel Chemical Solution Deposition Route. "IEEE Transactions on Applied Superconductivity", v. 23 (n. 3); p. 6600104. ISSN 1051-8223. https://doi.org/10.1109/TASC.2012.2228293.

Roa, J.J. and Konstantopoulou, Konstantina and Jiménez Piqué, E. and Martín, V. and Segarra, M. and Pastor Caño, Jose Ignacio (2012). Nanoindentation of Bridgman YBCO samples. "Ceramics International", v. 38 (n. 3); pp. 2035-2042. ISSN 1361-7605. https://doi.org/10.1016/j.ceramint.2011.10.039.

Pastor Caño, Jose Ignacio and Aguirre Herrera, Sandra and Barra Arias, Enrique and Quemada Vives, Juan (2012). Mejorando el aprendizaje y la evaluación en e-learning usando recursos multimedia. "Relada", v. 6 (n. 1); pp. 1-11. ISSN 1988-5822.

Aguirre Cebrian, Maria Vega and Martin Sanz, Antonia and Pastor Caño, Jose Ignacio and Llorca Martinez, Francisco Javier and Monge, M.A. and Pareja, R. (2011). Mechanical properties of tungsten alloys with Y2O3 and titanium additions. "Journal of Nuclear Materials", v. 417 (n. 1-3); p. 516. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2010.12.120.

Mesa, M.C. and Oliete Terraz, Patricia Beatriz and Orera, V.M. and Pastor Caño, Jose Ignacio and Martin Sanz, Antonia and Llorca Martinez, Francisco Javier (2011). Microstructural and mechanical study of AL2O3/Er3Al5O12 eutectic rods grown by the laser floating zone method. "Journal of the European Ceramic Society", v. 31 (n. 7); pp. 1241-1250. ISSN 0955-2219. https://doi.org/10.1016/j.jeurceramsoc.2010.05.004.

Gutierrez Lopez, J. and Rodriguez Senin, E. and Pastor Caño, Jose Ignacio and Paris, Anna and Martin Sanz, Antonia and Levenfeld, B. and Várez, A. (2011). Microstructure, magnetic and mechanical properties of Ni-Zn ferrites prepared by Powder Injection Moulding. "Powder Technology", v. 210 (n. 1); pp. 29-35. ISSN 0032-5910. https://doi.org/10.1016/j.powtec.2011.02.008.

Ester, Francisco J. and Merino, R.I. and Pastor Caño, Jose Ignacio and Martin Sanz, Antonia and Llorca Martinez, Francisco Javier (2008). Surface modification of Al2O3–ZrO2(Y2O3) eutectic oxides by laser melting: processing and wear resistance. "Journal of the American Ceramic Society", v. 91 (n. 11); pp. 3552-3559. ISSN 1551-2916. https://doi.org/10.1111/j.1551-2916.2008.02728.x.

Fernandez Jimenez, Ana and Palomo, Angel and Pastor Caño, Jose Ignacio and Martin Sanz, Antonia (2008). New cementitious materials based on alkali-activated fly ash: performance at high temperatures. "Journal of the American Ceramic Society", v. 91 (n. 10); pp. 3308-3314. ISSN 1551-2916. https://doi.org/10.1111/j.1551-2916.2008.02625.x.

Pastor Caño, Jose Ignacio and Llorca Martinez, Francisco Javier and Martin Sanz, Antonia and Peña Torre, José Ignacio and Oliete Terraz, Patricia Beatriz (2008). Fracture Toughness and Strength of Al2O3-Y3Al5O12 and Al2O3-Y3Al5O12-ZrO2 Directionally-Solidified Eutetic Oxides up to 1900K. "Journal of The European Ceramic Society", v. 28 (n. 12); pp. 2345-2351. ISSN 0955-2219. https://doi.org/10.1016/j.jeurceramsoc.2008.01.006.

Presentation at Congress or Conference

Orellana Barrasa, Jaime and Tarancón Román, Sandra and Tejado Garrido, Elena María and Pastor Caño, Jose Ignacio (2020). Instagram, a Tool for Teaching your Students. In: "CIVINEDU 2020 4th International Virtual Conference on Educational Research and Innovation", September 23 - 24, 2020. ISBN 978-84-09-22966-6. pp. 223-224.

Müller, Alexander von and Ewert, Dagmar and Galatanu, Magdalena and Milwich, Markus and Neu, Rudolf and Pastor Caño, Jose Ignacio and Siefken, Udo and Tejado Garrido, Elena María and You, J.H. (2016). Melt infiltrated Tungsten-Copper composites as advanced heat sink materials for plasma facing components of future nuclear fusion devices. In: "29th Symposium on Fusion Technology (SOFT 2016)", 05/09/2016-09/09/2016, Praga, República Checa. pp. 1-5.

Calvo, A. and García-Rosales, C. and Ordás, N. and Iturriza, I. and Schlueter, K. and Koch, F. and Pintsuk, G. and Tejado Garrido, Elena María and Pastor Caño, Jose Ignacio (2016). Self-passivating W-Cr-Y alloys: characterization and testing. In: "29th Symposium on Fusion Technology (SOFT 2016)", 05/09/2016-09/09/2016, Praga, República Checa. pp. 1-4.

Tejado Garrido, Elena María and Müller, Alexander von and You, J.H. and Pastor Caño, Jose Ignacio (2016). Thermal and mechanical properties of W/Cu composite materials for ITER heat sink applications. In: "XXV International Materials Research Congress", 14/08/2016-19/08/2016, Cancún, México. p. 1.

Gonzalez Arrabal, Raquel and Gordillo Garcia, Nuria and Rivera Manso, Antonio Manuel and Panizo Laíz, Miguel and Valles Ruiz, Miguel and Gonzalez Bris, Carlos and Tejado Garrido, Elena María and Pastor Caño, Jose Ignacio and Perlado Martín, José Manuel and Balabanian, C. and Guerrero Contreras, Carlos Luis and Bringa, E.M. and Iglesias, R. and Inestrosa-Izurieta, M.J. and Munnik, F. and Martín-Bragado, I. and Molina, J. and Moreno, J. (2015). Capabilities of Nanostructured Tungsten for Plasma Facing Material. In: "9th International Conference on Inertial Fusion Sciences and Applications (IFSA 2015)", 20–25 September 2015, Seattle, Washington, USA. pp. 1-10.

Qu, Bo and Martin Sanz, Antonia and Pastor Caño, Jose Ignacio and Palomo, Angel and Fernández Jiménez, A. (2015). Portland cement versus hybrid cement and geopolymers: performance at high temperatures. In: "14th International Congress on the Chemistry of Cement (ICCC 2015)", 13-16 octubre 2015, Beijing, China. pp. 1-10.

Konstantopoulou, Konstantina and Serazin, M. and Lloberas, J. and Granados, X. and Sanmarti, M. and Obradors, X. and Pastor Caño, Jose Ignacio (2014). Effect of strain and magnetic field on the critical current and electric resistance of the joints between HTS coated conductors. In: "11th European Conference on Applied Superconductivity (EUCAS 2013)", 15/09/2013 - 19/09/2013, Genova, Italy. pp..

Konstantopoulou, Konstantina and Serazin, M. and Lloberas, J. and Granados, X. and Sanmarti, M. and Obradors, X. and Pastor Caño, Jose Ignacio (2013). Effect of strain and magnetic field on the critical current and electric resistance of the joints between HTS coated conductors. In: "Current Research in Large-Scale Applications of Superconductivity, IOP", 20/11/2013 - 20/11/2013, Institute of Physics, London, U.K..

Novak, S. and Iveković, A. and Blagoeva, D. and Evans, L. and Galatanu, A. and Pastor Caño, Jose Ignacio (2013). Fabrication and properties of the SITE-SiCf/SiC composite. In: "16th International Conference on Fusion Reactor Materials, ICFRM 16", 20/10/2013 - 26/10/2013, Beijing, China.

Palacios García, Teresa and Muñoz, A. and Pastor Caño, Jose Ignacio (2013). Influence of Temperature and Atmosphere in Tungsten-Titanium-Lanthana Alloys. In: "Euromat 2013. European Congress and Exhibition on Advanced Materials and Processes.", 08/09/2013 - 13/09/2013, Sevilla. España.

González Bermúdez, Blanca and Pastor Caño, Jose Ignacio (2013). International Materials Science Seminars: A Bridge between Two Continents. In: "Euromat 2013. European Congress and Exhibition on Advanced Materials and Processes.", 08/09/2013 - 13/09/2013, Sevilla. España.

Palacios García, Teresa and Tejado Garrido, Elena María and Pastor Caño, Jose Ignacio and Muñoz, A. (2013). Mechanical Characterization of Tungsten-Titanium-Lanthana alloy: Influence of Temperature and Atmosphere. In: "14th International Conference on Plasma-Facing Materials and Components for Fusion Applications", 13/05/2013 - 17/05/2013, Jülich. Alemania. pp..

Palacios García, Teresa and Pastor Caño, Jose Ignacio and Muñoz, A. (2013). Mechanical Degradation of Tungsten Alloys at Extreme Temperatures in Vacuum and Oxidation Atmospheres. In: "The Materials Modeling and Simulation for Nuclear Fuels (MMSNF) 2013 workshop.", 14/10/2013 - 16/10/2013, Chicago. EE.UU..

Martin Sanz, Antonia and Ajejas, F. and Moreno, S. and Pastor Caño, Jose Ignacio and Palomo, Angel and Fernandez Jimenez, Ana (2013). Mechanical behavior of alkali-cement as function of the temperature.. In: "EUROMAT 2013. European Congress and Exhibition on Advanced Materials and Processes.", 08/09/2013 - 13/09/2013, Sevilla. España. pp..

Muñoz, A. and Savoini, B. and Monge, M.A. and Pastor Caño, Jose Ignacio and Tejado Garrido, Elena María and Pareja, R. (2013). Microstructural and mechanical characteristics of W-2Ti and W-1TiC processed by Hot Isostatic Pressing. In: "16th International Conference on Fusion Reactor Materials, ICFRM 16", 20/10/2013 - 26/10/2013, Beijing, China.

De Juan Mangas, Teresa and Tejado Garrido, Elena María and Ivekovic, Aljaz and Novak, Sasa and Pastor Caño, Jose Ignacio (2013). Microstructure and mechanical properties at high temperature of SiC-matrix by electrophoretic deposition and polymer infiltration and pyrolysis process. In: "Euromat 2013. European Congress and Exhibition on Advanced Materials and Processes.", 08/09/2013 - 13/09/2013, Sevilla. España.

Gómez-Jiménez, M. and Palacios García, Teresa and Muñoz, A. and Pastor Caño, Jose Ignacio (2013). Microstructure and mechanical properties degradation at high temperature of tungsten alloys processed by forging. In: "Euromat 2013. European Congress and Exhibition on Advanced Materials and Processes", 08/09/2013 - 13/09/2013, Sevilla. España.

Aguirre Herrera, Sandra and Barra Arias, Enrique and Quemada Vives, Juan and Mendiola Ubillos, María Ángeles and Pastor Caño, Jose Ignacio and Martínez Izquierdo, María Estíbaliz and Herradón Diez, Rafael and Alvarez Alonso, Marina A. and Salvachúa Rodríguez, Joaquín and Portaencasa Galan, Raquel (2012). Comunica-Media: Uso de la grabación de clases, el screencast y la videoconferencia en el aula. In: "Congrés internacional de Docència Universitària i Innovació (CIDUI) 2012", 04/07/2012 - 06/07/2012, Barcelona. pp..

Tejado Garrido, Elena María and Orellana Pérez, T. and Pastor Caño, Jose Ignacio and Funke, V.C. and Fütterer, W. (2012). Mechanical characterization of multicrystalline silicon wafers. In: "4th International Congress on Ceramics (ICC4)", 15/07/2012 - 19/07/2012, Chicago, Estados Unidos. p. 1.

Palacios García, Teresa and Jiménez, A. and Pastor Caño, Jose Ignacio and Muñoz, A. and Monge, M.A. and Pareja, R. (2012). Comportamiento mecánico de la aleación W+1%Y2O3 en función de la atmósfera y la temperatura. In: "XXIX Encuentro del Grupo Español de Fractura", 21 de marzo de 2012 a 23 de marzo de 2012, Bilbao (España).

Tejado Garrido, Elena María and Orellana Pérez, T. and Pastor Caño, Jose Ignacio and Funke, V.C. and Fütterer, W. (2012). Mechanical Characterization of Multicrystalline Silicon Substrates for Solar Cell Applications. In: "XXIX Encuentro del Grupo Español de Fractura", 21 de marzo de 2012 a 23 de marzo de 2012, Bilbao (España).

Konstantopoulou, Konstantina and Pastor Caño, Jose Ignacio and Roa, J.J. and Segarra, M. (2012). Microestructura y propiedades mecánicas del material masivo superconductor YBCO a 300 Y 77 K.. In: "XXIX Encuentro del Grupo Español de Fractura", 21 de marzo de 2012 a 23 de marzo de 2012, Bilbao (España).

Gordillo Garcia, Nuria and Gonzalez Arrabal, Raquel and Rivera de Mena, Antonio and Fernández, I. and Briones Fernández-Pola, Fernando and Rio, David del and Gómez, C. and Pastor Caño, Jose Ignacio and Tejado Garrido, Elena María and Panizo Laíz, Miguel and Perlado Martín, José Manuel (2012). Nanostructured tungsten as a first wall material for the future nuclear fusion reactors. In: "Nanostructured tungsten as a first wall material for the future nuclear fusion reactors", 10/09/2012 - 14/09/2012, Madrid, Spain. pp. 1-2.

Aguirre Herrera, Sandra and Barra Arias, Enrique and Quemada Vives, Juan and Pastor Caño, Jose Ignacio (2012). Using lecture recordings to support curriculum changes in the European convergence process. In: "4th International Conference on Education and New Learning Technologies (EDULEARN12)", 02/07/2012 -04/07/2012, Barcelona, Spain. ISBN 978-84-695-3491-5. pp. 6986-6996.

Aguirre Herrera, Sandra and Quemada Vives, Juan and Pastor Caño, Jose Ignacio and Martínez Izquierdo, María Estíbaliz and Mendiola Ubillos, María Ángeles and Machuca, Victoria and Portaencasa Galan, Raquel (2011). CyberAula 2.0: Integration of Moodle with videoconferencing and lecture recording services.. In: "World Conference on Educational Multimedia, Hypermedia and Telecommunications, ED-MEDIA 2011", 27/06/2011 - 01/07/2011, Lisboa, Portugal. ISBN 1-880094-85-X.

Orellana Pérez, T. and Funke, Claudia and Futterer, W. and Riepe, S. and Möller, H.J. and Tejado Garrido, Elena María and Pastor Caño, Jose Ignacio (2011). Impact of Impurities on the Mechanical Strength of Multicrystalline Silicon. In: "26th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC", 05/09/2011 - 09/09/2011, Hamburg, Germany. ISBN 3-936338-27-2. pp. 1864-1870. https://doi.org/10.4229/26thEUPVSEC2011-2BV.4.23.

Konstantopoulou, Konstantina and Pastor Caño, Jose Ignacio and Roa, J.J. and Segarra, M. (2010). Comportamiento mecánico de materiales masivos superconductores de segunda generación en función de la temperatura. In: "XXVII Encuentro del Grupo Español de Fractura", 25/03/2010 - 27/03/2010, Oporto, Portugal.

Martin Sanz, Antonia and Fernandez Jimenez, Ana and Pastor Caño, Jose Ignacio and Palomo, Angel (2010). Comportamiento mecánico a altas temperaturas de cementos de ceniza volante activados alcalinamente. In: "XXVII Encuentro del Grupo Español de Fractura", 17/03/2010 - 19/03/2010, Oporto, Portugal.

Palacios García, Teresa and Aguirre Cebrian, Maria Vega and Martin Sanz, Antonia and Pastor Caño, Jose Ignacio and Llorca Martinez, Francisco Javier and Monge, M.A. and Muñoz, A. and Pareja, R. (2010). Comportamiento mecánico en función de la temperatura de aleaciones wolframio-vanadio.. In: "XI Congreso Nacional de Materiales", 23/06/2010 - 25/06/2010, Zaragoza, España. ISBN 9788492522248.

Mesa, M.C. and Oliete Terraz, Patricia Beatriz and Larrea, Angel and Orera, V.M. and Pastor Caño, Jose Ignacio and Martin Sanz, Antonia and Llorca Martinez, Francisco Javier (2010). Microestructura y propiedades mecánicas de fibras cerámicas eutécticas Al2O3/Er3Al5O12/ZrO2 procesadas por fusión zonal por láser.. In: "XI Congreso Nacional de Materiales", 23/06/2010 - 25/06/2010, Zaragoza, España.

Cerecedo, C. and Valcarcel, V. and Solis, A. and Pastor Caño, Jose Ignacio and Molina, M. and Prieto, R. and Louis, E. and Narciso, J. (2010). Neoker Single Crystal Alumina Fibers as reinforcement in Al-based MMC: first steps. In: "Modern ceramic materials and their application – 2010", 13/05/2010 - 14/05/2010, Novosibirssk, Rusia.

Fernandez, P. and Garcia Cortes, I. and Gonzalez, M. and Gonzalez Arrabal, Raquel and Hernandez, T. and Ibarra, A. and Jimenez Rey, D. and Monge, M.A. and Pareja, R. and Pastor Caño, Jose Ignacio and Perlado Martín, José Manuel and Roman, R. (2010). Tecnologías de materiales con aplicaciones en fusión y su desarrollo en la instalación TechnoFusión. In: "XI Congreso Nacional de Materiales", 23/06/2010 - 25/06/2010, Zaragoza, España.

Thesis

Pastor Caño, Jose Ignacio (1993). Fractura de materiales cerámicos estructurales avanzados. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.93.

  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM