Items where author is "Porro González, Juan Antonio"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 63.

Article

Petan, Luca and Grum, Janez and Porro González, Juan Antonio and Ocaña Moreno, José Luis and Sturm, Roman (2019). Fatigue Properties of Maraging Steel after Laser Peening. "Metals", v. 9 (n. 12); pp. 1271-1288. ISSN 2075-4701. https://doi.org/10.3390/met9121271.

Colón Hernández, Cristóbal and Andrés García, María Isabel de and Moreno Díaz, Cristina and Alonso Medina, Aurelia and Porro González, Juan Antonio and Angulo Ramonell, Ignacio and Ocaña Moreno, José Luis (2019). Experimental determination of electronic density and temperature in water-confined plasmas generated by laser shock processing. "Metals", v. 9 (n. 7); pp. 808-822. ISSN 2075-4701. https://doi.org/10.3390/met9070808.

Ocaña Moreno, José Luis and González-Carrasco, J. L. and Lieblich, M. and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Cordovilla Baró, Francisco and Angulo Ramonell, Ignacio and Izaguirre, I. (2018). Laser Shock Processing as an Advanced Technique for the Surface and Mechanical Resistance Properties Modification of Bioabsorbable Magnesium Alloys. "Materials Science Forum", v. 941 ; pp. 2489-2494. ISSN 0255-5476. https://doi.org/10.4028/www.scientific.net/MSF.941.2489.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and García Beltrán, Ángel and Santiago, J.A. and Peral Jiménez, David (2017). Improvement of surface and mechanical properties of high strength metallic alloys by laser shock processing. "Advances in Materials and Processing Technologies", v. 3 (n. 1); pp. 12-22. ISSN 2374-068X. https://doi.org/10.1080/2374068X.2016.1247241.

Moreno-Diaz, Cristina and Alonso Medina, Aurelia and Colón Hernández, Cristóbal and Porro González, Juan Antonio and Ocaña Moreno, José Luis (2016). Measurement of plasma electron density generated in an experiment of laser shock processing, utilizing the H­α­-line. "Journal of Materials Processing Technology", v. 232 ; pp. 9-18. ISSN 0924-0136. https://doi.org/10.1016/j.jmatprotec.2016.01.026.

Ocaña Moreno, José Luis and Correa Guinea, Carlos and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David (2015). Induction of through-thickness compressive residual stress fields in thin Al2024-T351 plates by laser shock processing. "International Journal of Structural Integrity", v. 6 (n. 6); pp. 725-736. ISSN 1757-9864. https://doi.org/10.1108/IJSI-10-2014-0051.

Ocaña Moreno, José Luis and Díaz, M. and Porro González, Juan Antonio and Ruiz de Lara de Luis, Leonardo and Correa, C. (2014). Effect of Thermal Treatments on the Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing. "Materials Science Forum", v. 783-86 (n. null); pp. 2376-2381. ISSN 0255-5476. https://doi.org/10.4028/www.scientific.net/MSF.783-786.2376.

Trdan, Uros and Porro González, Juan Antonio and Ocaña Moreno, José Luis and Grum, Janez (2012). Laser shock peening without absorbent coating (LSPwC) effect on 3D surface topography and mechanical properties of 6082-T651 Al alloy. "Surface and Coatings Technology", v. 208 ; pp. 109-116. ISSN 0257-8972. https://doi.org/10.1016/j.surfcoat.2012.08.048.

Ivetic, G. and Meneghin, I. and Troiani, E. and Molinari, G. and Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Lanciotti, A. and Ristori, V. and Polese, Claudia and Plaisier, J. and Lausi, A. (2012). Fatigue in laser shock peened open-hole thin aluminium specimens. "Materials Science and Engineering: A", v. 542 ; pp. 573-579. ISSN 0921-5093. https://doi.org/10.1016/j.msea.2011.12.010.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Caballero, Luis and Iordachescu, Danut and Ocaña Moreno, José Luis and Porro González, Juan Antonio (2012). Laser Shock Processing influence on local properties and overall tensile behavior of friction stir welded joints. "Surface and Coatings Technology", v. 206 (n. 8-9); pp. 2422-2429. ISSN 0257-8972. https://doi.org/10.1016/j.surfcoat.2011.10.044.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2012). Mechanical properties enhancement of high reliability metallic materials by laser shock processing. "Materials Science Forum", v. 706-70 ; pp. 2565-2570. ISSN 0255-5476. https://doi.org/10.4028/www.scientific.net/MSF.706-709.2565.

Morales Furió, Miguel and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and Holgado Bolaños, Miguel and Ocaña Moreno, José Luis (2010). Analysis of plasma thermal surface effects on the residual stress field induced by LSP in Al2024-t351. "Journal of Optoelectronics and Advanced Materials", v. 12 (n. 3); pp. 718-722. ISSN 1454-4164.

Grum, Janez and Trdan, Uros and Ocaña Moreno, José Luis and Porro González, Juan Antonio (2010). Laser Peening For Improving Metallic Components. "Metal Finishing News", v. 11 (n. marzo); pp. 58-60. ISSN 0026-0576.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Blasco Litago, Manuel and Molpeceres Álvarez, Carlos Luis and Iordachescu, Danut and Gomez-Rosas, G. and Rubio-Gonzalez, C. (2010). Induction of Engineered Residual Stresses Fields and Associate Surface Properties Modification by Short Pulse Laser Shock Processing. "Materials Science Forum", v. 638-64 ; pp. 2446-2451. ISSN 1662-9752. https://doi.org/10.4028/www.scientific.net/MSF.638-642.2446.

Morales Furió, Miguel and Molpeceres Álvarez, Carlos Luis and Porro González, Juan Antonio and García Beltrán, Ángel and Ocaña Moreno, José Luis (2010). Numerical Thermo-Mechanical Modelling Of Stress Fields and Residual Constraints in Metallic Targets Subject To Laser Shock Processing. "Materials Science Forum", v. 638-64 ; pp. 2682-2687. ISSN 1662-9752. https://doi.org/10.4028/www.scientific.net/MSF.638-642.2682.

Ocaña Moreno, José Luis and Morales Furió, Miguel and García-Ballesteros Ramírez, Juan José and Porro González, Juan Antonio and Garcia Garcia, Oscar and Molpeceres Álvarez, Carlos Luis (2009). Laser Shock Microforming of Thin Metal Sheets. "Applied Surface Science", v. 255 (n. 10); pp. 5633-5636. ISSN 1875-3892. https://doi.org/10.1016/j.apsusc.2008.10.084.

Iordachescu, Mihaela and Ruiz Hervías, Jesús and Iordachescu, Danut and Porro González, Juan Antonio and Scutelnicu, Elena (2008). Residual stress analysis of friction stir processed AA6061. "Welding in the World", v. 52 (n. Specci); pp. 753-757. ISSN 0043-2288.

Porro González, Juan Antonio and Morales Furió, Miguel and Molpeceres Álvarez, Carlos Luis and Sanchez Perez, Angel M. and Ocaña Moreno, José Luis (2008). Análisis de Tensiones Residuales Inducidas en Aleaciones Metálicas por Tratamientos Superficiales mediante Ondas de Choque Generadas por Láser. "Anales de Ingeniería Mecánica", v. 8 ; pp. 815-820. ISSN 0212-5072.

Blasco Litago, Manuel and García Beltrán, Ángel and Porro González, Juan Antonio and Morales Furió, Miguel and Ocaña Moreno, José Luis (2008). Análisis de la Influencia de los Parámetros Operacionales en Recubrimientos Superficiales Asistidos por Láser de Acero AISI 431 sobre Acero al Carbono. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 251-256. ISSN 0212-5072.

Morales Furió, Miguel and Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis and Porro González, Juan Antonio and García y Beltrán, Ángel (2008). Model based optimization criteria for the generation of deep compressive residual stress fields in high elastic limit metallic alloys by ns-laser shock processing. "Surface and Coatings Technology", v. 202 (n. 11); pp. 2257-2262. ISSN 0257-8972. https://doi.org/10.1016/j.surfcoat.2007.12.007.

Morales Furió, Miguel and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and García Beltrán, Ángel and Acebal, Nestor and Ocaña Moreno, José Luis (2008). Optimización de Procesos de Inducción de Tensiones Residuales en Compresión en Materiales Metálicos por Ondas de Choque Generadas por Láser. "Anales de Ingeniería Mecánica", v. 2. Año ; pp. 923-930. ISSN 0212-5072.

Garcia Garcia, Oscar and Morales Furió, Miguel and García-Ballesteros Ramírez, Juan José and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and Sanchez Perez, Angel M. and Ocaña Moreno, José Luis (2008). Microconformado de Materiales Metálicos mediante Pulsos Láser en el Dominio de ns. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 505-510. ISSN 0212-5072.

Grum, Janez and Zupancic, Martin and Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio (2008). Laser shock processing as a method of decreasing fatigue of a die-casting die made of maraging steel. "Int. J. Microstructure and Materials Properties", v. 3 (n. 2); pp. 271-281. ISSN 1741-8429. https://doi.org/10.1504/IJMMP.2008.018734.

Presentation at Congress or Conference

Ocaña Moreno, José Luis and Cordovilla Baró, Francisco and García Beltrán, Ángel and Vicente Oliva, Jesús de and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Tapia Fernández, Santiago and Angulo Ramonell, Ignacio and Díaz, J. and Álvarez, P. and Montealegre, M. A. and Garzón, M. and Muñoz, D. A. (2019). Integrated Analysis and Quality Control of Laser-Based Additive Manufacturing Processes. In: "3rd International Conference on 3D Printing Technology and Innovations", 25-26 Mar 2019, Roma, Italia. pp. 1-45.

Ocaña Moreno, José Luis and González Carrasco, J. L. and Lieblich, M. and Galván, J. C. and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Cordovilla Baró, Francisco and Angulo Ramonell, Ignacio and Izaguirre, I. (2018). Laser Shock Processing as an Advanced Technique for the Surface and Mechanical Resistance Properties Modification of Bioabsorbable Magnesium Alloys. In: "THERMEC’2018: 10th International Conference on Processing and Manufacturing of Advanced Materials", July 09 - July 13, 2018, Paris, France. pp. 1-45.

Ocaña Moreno, José Luis and González Carrasco, J. L. and Lieblich, M. and Angulo Ramonell, Ignacio and Cordovilla Baró, Francisco and Porro González, Juan Antonio and Díaz Muñoz, Marcos (2018). Application of Laser Shock Processing to the Surface and Mechanical Resistance Properties Modification of Bioreabsorbable Magnesium Alloys. In: "7th International Conference on Laser Peening and Related Phenomena (LSP 2018)", 17th-22nd June 2018, Singapore. pp. 1-38.

Ocaña Moreno, José Luis and Jagdheesh, Radhakrishnan and Díaz Muñoz, Marcos and Porro González, Juan Antonio and Cordovilla Baró, Francisco and Angulo Ramonell, Ignacio and Huerta Murillo, Daniel and Cardoso, José Teixeira (2018). Direct Generation of Superhydrophobic Microstructures in Metals by UV Laser Sources in the Nanosecond Regime. In: "10th International Laser Symposium and Symposium on Tailored Joining", February 27–28, 2018, Dresden, Germany. pp. 1-35.

Ocaña Moreno, José Luis and González-Carrasco, J. L. and Lieblich, M. and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Angulo Ramonell, Ignacio and Cordovilla Baró, Francisco and Peral Jiménez, David (2017). Laser Shock Processing for the Enhancement of Mechanical and Surface Properties of Biocompatible Alloys. In: "FiMPART'2017 International Conference on Frontiers in Materials Processing Applications, Research and Technology", 9-12 July, 2017, Bordeaux-France. pp. 1-50.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Angulo Ramonell, Ignacio and Cordovilla Baró, Francisco and Peral Jiménez, David and González-Carrasco, J. L. and Lieblich, M. (2017). Improvement of Fatigue Life and Surface Properties of Metallic Materials of Biomedical Interest by Laser Shock Processing. In: "BRAMAT 2017. 10th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE & ENGINEERING", 8-11 March 2017, BRASOV (Rumanía). pp. 1-56.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and García Beltrán, Ángel and Angulo Ramonell, Ignacio and Cordovilla Baró, Francisco (2017). Laser Shock Processing of Metallic Alloys: Process Overview and Development of Advanced Applications through the Integrated Modelling-Processing-Testing Approach for the Robust Design of Treatments on High-Reliability Components. In: "Laser Applications Conference 2017", 1–5 October 2017, Nagoya, Aichi Japan. ISBN 9780960038077. pp. 1-94.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David and Santiago Varela, José Antonio and Angulo Ramonell, Ignacio (2016). Laser shock processing: an emerging technique for the mechanical and surface properties enhancement of metallic materials. In: "The 30th International Conference on Surface Modification Technologies", 29th Jne - 1st July, 2016, Milán (Italy). pp. 1-6.

Moreno Díaz, Cristina and Porro González, Juan Antonio and Alonso Medina, Aurelia and Colón, C. and Ocaña Moreno, José Luis (2015). Alpha-Line Characterization of Electronic Density in Plasmas Generated by Laser Shock Processing. In: "5th International Conference on Laser Peening & Related Phenomena - ICLPRP", May 10-15, 2015, Cincinnati, Ohio, USA. pp. 1-22.

Santiago, J.A. and Ruiz de Lara de Luis, Leonardo and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ocaña Moreno, José Luis (2015). Analysis of induced surface modifications effects on the electrochemical behaviour of LSP-treated metallic alloys. In: "5th International Conference on Laser Peening & Related Phenomena - ICLPRP", May 10-15, 2015, Cincinnati, Ohio, USA. pp. 1-38.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz, M. and Ruiz de Lara de Luis, Leonardo and Correa, C. and Peral, D. (2015). Fatigue life enhancement of high reliability metallic components by laser shock processing. In: "High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications IV Conference", 7-12 February 2015, San Francisco, California, United States. ISBN 9781628414462 ISSN: 0277-786X. pp. 1-6. https://doi.org/10.1117/12.2076125.

Ocaña Moreno, José Luis and Correa Guinea, Carlos and Porro González, Juan Antonio and García Beltrán, Ángel and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David and Cordovilla Baró, Francisco (2015). Induction of Through-Thickness Compressive Residual Stresses and Application to the Mitigation of the Effect of Surface Defects on the Fatigue Life of Thin Metal Plates by LSP. In: "5th International Conference on Laser Peening & Related Phenomena - ICLPRP", May 10-15, 2015, Cincinnati, Ohio, USA. pp. 1-43.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Díaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and García Beltrán, Ángel and Santiago Varela, José Antonio and Peral Jiménez, David (2015). Laser Shock Processing: An Advanced Technique for Improving the Surface and Mechanical Properties of Metallic Alloys. In: "Advances in Materials and Processing Technologies Conference (AMPT 2015)", 14-17 diciembre 2015, Madrid (Spain). pp. 1-40.

Ocaña Moreno, José Luis and Diaz Muñoz, Marcos and Porro González, Juan Antonio and Ruiz de Lara de Luis, Leonardo and Correa, C. (2014). Effect of Thermal Treatments on the Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing. In: "THERMEC 2013, 8th International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties Applications", 2/12/2013 - 6/12/2013, Las Vegas, USA. ISBN 978-3-03835-073-6.

Ocaña Moreno, José Luis and Correa Guinea, Carlos and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David (2014). Induction of through-thickness compressive residual stress fields in thin Al2024-T351 plates by laser shock processing. In: "2nd International Conference of the International Journal of Structural Integrity", 1-4 sept. 2014, Funchal, Madeira, Portugal. pp. 1-13.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Correa Guinea, Carlos and García-Ballesteros Ramírez, Juan José and Garcia Garcia, Oscar (2014). Laser Shock Microforming of Thin Metal Sheets: Physical Principles, Modelling and Experimental Implementation. In: "9th International Conference on Industrial Tools and Material Processing Technologies", 9th - 11th April 2014, Ljubljana (Eslovenia). pp. 1-40.

Carreón, H. and Barriuso, S. and Porro González, Juan Antonio and González-Carrasco, J. L. and Ocaña Moreno, José Luis (2014). Thermoelectric assessment of laser peening induced effects on a metallic biomedical Ti6Al4V. In: "Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XIV", ., San Francisco. ISBN 9780819498854. pp..

Ruiz de Lara de Luis, Leonardo and Diaz Muñoz, Marcos and Porro González, Juan Antonio and Correa Guinea, Carlos and Ocaña Moreno, José Luis (2013). Analysis of safety-based incentives in public private partnerships. The case of Spain. In: "4th International Conference on Laser Peening and Related Phenomena", 16/07/2013 - 18/07/2013, Rio de Janeiro, Brasil. pp. 1-13.

Barriuso, S. and Carreón, H. and Porro González, Juan Antonio and González-Carrasco, J. L. and Ocaña Moreno, José Luis (2013). Assessment of laser peening induced effects on Ti6Al4V by non-destructive measurements. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid. pp. 1-6.

Ruiz de Lara de Luis, Leonardo and Diaz Muñoz, Marcos and Porro González, Juan Antonio and Correa Guinea, Carlos and Ocaña Moreno, José Luis (2013). Effect of LSP treatment on the surface topography, friction and wear of Al2024 alloy. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid, Spain. pp. 1-6.

Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Porro González, Juan Antonio and Correa, C. and Ocaña Moreno, José Luis (2013). Effect of Thermal Relaxation on LSP Induced Residual Stresses and Fatigue Life Enhancement of AISI 316L stainless steel. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa, C. and Gil Santos, Andrea and Peral Jiménez, David (2013). Induction of engineered residual stresses fields and enhancement of fatigue life of high reliability metallic components by laser shock processing. In: "International Conference on High-Power Laser Materials Processing - Lasers, Beam Delivery, Diagnostics, and Applications II.", 02/02/2013 - 7/02/2013, San Francisco, California (EE. UU.). ISBN 9780819493729.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Ocaña Moreno, José Luis and Porro González, Juan Antonio and Ruiz Hervías, Jesús (2013). LSP Influence on Mechanical Properties of Thin Dissimilar Laser Welded Joints. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Garcia Garcia, Oscar and Porro González, Juan Antonio and Correa Guinea, Carlos and García-Ballesteros Ramírez, Juan José (2013). Laser Shock Micro-Forming as an Emerging Technique for Microsystems Shaping and Adjustment. In: "4M2013 Conference. 10th International Conference on Multi-Material Micro Manufacture", 08/10/2013-10/10/2013, San Sebastián, España. ISBN 978-981-07-7248-2.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Correa Guinea, Carlos and Morales Furió, Miguel and García-Ballesteros Ramírez, Juan José (2013). Laser Shock Microforming of Thin Metal Sheets with Q-Switched ns Lasers. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

Correa Guinea, Carlos and Morales Furió, Miguel and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Peral Jiménez, David and Ocaña Moreno, José Luis (2013). Numerical prediction of residual stresses fields induced in thin Al2024-T351 sheets by laser shock processing. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid, Spain. pp. 1-6.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos and Gil Santos, Andrea (2012). Application of high-intensity short-pulse lasers to the mechanical and surface properties improvement of high reliability metallic components by shock processing. In: "VII Internacional Conference BT/LA", 18/09/2012-21/09/2012, Saint Petersburg, Russia.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2012). Laser shock processing: an emerging technique for the improvement of fatigue life and surface properties of high reliability metallic components. In: "4th International Conference on Materials Science and Technologies (ROMAT 2012)", 17/10/2012 -19/10/2012, Bucharest, Romania.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Correa Guinea, Carlos and Colón Hernández, Cristóbal and Alonso Medina, Aurelia and Autric, Michele L. (2012). Physical characterization of laser interaction and shock generation in laser processing: coupled theoretical-experimental analysis. In: "International High Power Laser Ablation Conference (HPLA2012)", 30/04/2012 - 03/05/2014, Santa Fe, NM, USA.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Correa Guinea, Carlos and Colón Hernández, Cristóbal and Alonso Medina, Aurelia and Autric, Michele L. (2012). Physical characterization of laser interaction and shock generation in laser shock processing: coupled theoretical-experimental analysis. In: "Unspecified. pp. 209-218. https://doi.org/10.1063/1.4739875.

Iordachescu, Danut and Porro González, Juan Antonio and Iordachescu, Mihaela and Ruiz Hervías, Jesús and Ocaña Moreno, José Luis and Vilaca, Pedro (2011). Characterization Of Friction Stir Welded Joints Of Aa 2024-T351 - Native Vs. Treated By Laser Shock Processing. In: "7 th International Conference on Materials Science & Engineering – BRAMAT 2011", 24/02/2011 - 26/02/2011, Poiana Brasov, Rumania. pp. 63-66.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2011). Improvement of Mechanical Properties and Life Extension of High Reliability Structural Components by Laser Shock Processing. In: "Eco-Photonics 2011", 28/03/2011 - 30/03/2011, Estrasburgo, Francia.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and García-Ballesteros Ramírez, Juan José and Correa Guinea, Carlos (2011). Laser Shock Microformingof Thin Metal Sheets with ns Lasers. In: "Sixth International WLT Conference on Lasers in Manufacturing", 23/05/2011 - 26/05/2011, Munich, Alemania. https://doi.org/10.1016/j.phpro.2011.03.123.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos and Gil Santos, Andrea (2011). Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys. In: "8th international Conference on Industrial Tools and material Processing Technologies", 02/10/2011 - 05/10/2011, Ljubljana, Eslovenia.

Ivetic, G. and Meneghin, I. and Troiani, E. and Molinari, G. and Lanciotti, A. and Ocaña Moreno, José Luis and Ristori, V. and Morales Furió, Miguel and Porro González, Juan Antonio and Plaisier, J. and Lausi, A. (2011). The Effect of Sequence of Operations on Fatigue Life of LSP Treated Open-hole Aluminium Specimens. In: "3rd International Conference on Laser Peening", 11/10/2011 - 14/10/2011, Osaka, Japón.

Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Holgado Bolaños, Miguel and García-Ballesteros Ramírez, Juan José and Lauzurica Santiago, Sara and Porro González, Juan Antonio and Garcia Garcia, Oscar and Iordachescu, Danut (2009). Application of high intensity short pulse lasers to precision micromanufacturing. In: "Conference “Diaspora in Cercetarea Stiintifica si Invatamantul Superior din Romania", 17/09/2008-19/09/2008, Bucarest, Rumania.

Iordachescu, Danut and Birsan, Dan and Iordachescu, Mihaela and Ocaña Moreno, José Luis and Porro González, Juan Antonio (2009). FEM model and experiments for friction stir spot welding of AA6061-T4. In: "8th International Conference on Trends in Welding Research 2008", 01/06/2008-06/06/2008, Pine Mountain, Georgia (EE.UU.). ISBN 978-1-615-03002-6.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Molpeceres Álvarez, Carlos Luis and Porro González, Juan Antonio and Iordachescu, Danut (2008). Predictive assessment of plasma dynamics effects on the shock transformation of metallic alloys by laser shock processing. In: "International Conference. Modern Laser Applications. Indlas 2008", 20/05/2008-23/05/2008, Bran, Rumania.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and García Beltrán, Ángel (2008). Scientific and Technological Issues on the Application of High Intensity Lasers to Material Properties Modification: The case of Laser Shock Processing of Metallic Alloys. In: "International Conference Extreme Light Infraestructure", 16/09/2008-18/09/2008, Bucarest, Rumania.

Thesis

Porro González, Juan Antonio (2010). Optimización de campos de tensiones residuales en procesos de tratamiento superficial de materiales metálicos mediante ondas de choque generadas por láser. Thesis (Doctoral), E.T.S.I. Industriales (UPM). https://doi.org/10.20868/UPM.thesis.7202.

  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM