Browse by Department

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Name | Item Type | No Grouping
Jump to: B | C | E | F | G | H | I | L | M | O | P | R | S | T | V
Number of items: 39.

B

Blasco Litago, Manuel and Iordachescu, Danut and Ocaña Moreno, José Luis (2008). Soldadura láser remota de aceros de alto límite elástico. "Anales de Ingeniería Mecánica", v. 16 ; pp. 547-552. ISSN 0212-5072.

Bergant, Zoran and Grum, Janez and Marko Slabe, Janez and Ocaña Moreno, José Luis (2010). Surface Repair of Tool Made of 12 Ni Maraging Steel by Laser Cladding of NiCoMo Powder. "Advanced Materials Research", v. 89-91 ; pp. 675-680. ISSN 0924-3046. https://doi.org/10.4028/www.scientific.net/AMR.89-91.675.

C

Colina Brito, Mónica and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Allens-Perkins, F. and Guadaño, G. and Ocaña Moreno, José Luis (2011). Laser ablation modelling of aluminium, silver and crystalline silicon for applications in photovoltaic technologies. "Energy Materials", v. 27 (n. 6); pp. 414-423. ISSN 1748-9237. https://doi.org/10.1179/174329409X397804.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Sanchez Perez, Angel M. and Ocaña Moreno, José Luis (2008). Metrología óptica dimensional submicrométrica para determinación de espesores en sub-micro estructuras. "Anales de Ingeniería Mecánica", v. 16 (n. 1); pp. 499-504. ISSN 0212-5072.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and Sanza Gutiérrez, Francisco Javier and Laguna Heras, Maria Fe and Angulo Barrios, Carlos and López-Romero Moraleda, David and Ortega, Francisco J. and Bañuls, María José and Puchades, Rosa and Maquieira, A. (2011). Optimization of a label-free biosensor vertically characterized based on a periodic lattice of high aspect ratio SU-8 nano-pillars with a simplified 2D theoretical model. "Physica Status Solid c", v. 8 (n. 3); pp. 1087-1092. ISSN 1610-1642. https://doi.org/10.1002/pssc.201000412.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and García-Ballesteros Ramírez, Juan José and Zinoviev, K. and Férnandez-Sánchez, C. and Sanza Gutiérrez, Francisco Javier and Molpeceres Álvarez, Carlos Luis and Laguna Heras, Maria Fe and Llobera, A. and Ocaña Moreno, José Luis and Dominguez, C. (2011). UV laser-induced high resolution cleaving of Si wafers for micro-nano devices and polymeric waveguide characterization. "Applied Surface Science", v. 257 (n. 12); pp. 5424-5428. ISSN 0169-4332. https://doi.org/10.1016/j.apsusc.2010.11.021.

E

Elizondo, Martha Angélica and Chávez, René E. and Cámara Moral, María Encarnación and Tejero, Andrés (2012). Application of Wignner-Ville distribution to identify anomalies in GPR profiles. "Geofísica Internacional", v. 51 (n. 2); pp. 121-127. ISSN 0016-7169.

F

Fernández Robledo, Susana and Lauzurica Santiago, Sara and García-Ballesteros Ramírez, Juan José and Molpeceres Álvarez, Carlos Luis and Guadaño Ayuso, Gonzalo and Allen-Perkins, F. and Ocaña Moreno, José Luis (2008). Avances en la fabricación de células y módulos fotovoltaicos de silicio en capa fina mediante láser. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 295-300. ISSN 0212-5072.

G

Gámez Mejías, María de Linarejos and Gamez Mejias, Berta and Caturla Terol, Maria Jose and Ortiz, Christopher and Perlado Martín, José Manuel (2008). He production and induced swelling in KOYO-F. "Journal Of Physics: Conference Series", v. 112 (n. 3); pp.. ISSN 1742-6596. https://doi.org/10.1088/1742-6596/112/3/032042.

Grum, Janez and Trdan, Uros and Ocaña Moreno, José Luis and Porro González, Juan Antonio (2010). Laser Peening For Improving Metallic Components. "Metal Finishing News", v. 11 (n. marzo); pp. 58-60. ISSN 0026-0576.

Grum, Janez and Zupancic, Martin and Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio (2008). Laser shock processing as a method of decreasing fatigue of a die-casting die made of maraging steel. "Int. J. Microstructure and Materials Properties", v. 3 (n. 2); pp. 271-281. ISSN 1741-8429. https://doi.org/10.1504/IJMMP.2008.018734.

Garcia Garcia, Oscar and Morales Furió, Miguel and García-Ballesteros Ramírez, Juan José and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and Sanchez Perez, Angel M. and Ocaña Moreno, José Luis (2008). Microconformado de Materiales Metálicos mediante Pulsos Láser en el Dominio de ns. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 505-510. ISSN 0212-5072.

Gámez Mejías, María de Linarejos and Gamez Mejias, Berta and Caturla Terol, Maria Jose and Terentyev, D. and Perlado Martín, José Manuel (2011). Object Kinetic Monte Carlo calculations of irradiated Fe-Cr dilute alloys: The effect of the interaction radius between substitutional Cr and self-interstitial Fe. "Nuclear Instruments and Methods in Physics Research B", v. 269 (n. 14); pp. 1684-1688. ISSN 0167-5087. https://doi.org/10.1016/j.nimb.2010.12.044.

García Beltrán, Ángel and Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis (2008). TEMPLUM: A Process Adapted Numerical Simulation Code for The 3D Predictive Assessment of Laser Surface Heat Treatments in Planar Geometry. "Wseas Transactions on Computers", v. 7 (n. 2); pp. 65-74. ISSN 1109-2750.

H

Hidalgo, Miguel Angel and Cangas Pradillo, Roberto (2010). Rashba spin–orbit coupling effect on the quantum Hall magnetoresistivity. "Physica E", v. 42 ; pp. 1329-1332. https://doi.org/10.1016/j.physe.2009.11.017.

Holgado Bolaños, Miguel and Casquel del Campo, Rafael and Laguna Heras, Maria Fe (2008). Label-free Optical Biosensing on a single chip.. "Spie Newsroom" ; pp. 1-3. ISSN 1818-2259. https://doi.org/10.1117/2.1200812.1381.

I

Iordachescu, Mihaela and Georgescu, Bogdan and Iordachescu, Danut and Ocaña Moreno, José Luis (2008). Cold welding on cogged surface. "Anales de Ingeniería Mecánica", v. 16 ; pp. 327-332. ISSN 0212-5072.

Ivetic, G. and Meneghin, I. and Troiani, E. and Molinari, G. and Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Lanciotti, A. and Ristori, V. and Polese, Claudia and Plaisier, J. and Lausi, A. (2012). Fatigue in laser shock peened open-hole thin aluminium specimens. "Materials Science and Engineering: A", v. 542 ; pp. 573-579. ISSN 0921-5093. https://doi.org/10.1016/j.msea.2011.12.010.

Iordachescu, Danut and Iordachescu, Mihaela and Blasco Litago, Manuel and Ocaña Moreno, José Luis (2008). New Approach on the Cold Welding of Metals: Application to Aluminium Bars. "Anales de Ingeniería Mecánica", v. 16 ; pp. 533-538. ISSN 0212-5072.

Iordachescu, Mihaela and Ruiz Hervías, Jesús and Iordachescu, Danut and Porro González, Juan Antonio and Scutelnicu, Elena (2008). Residual stress analysis of friction stir processed AA6061. "Welding in the World", v. 52 (n. Specci); pp. 753-757. ISSN 0043-2288.

L

Lauzurica Santiago, Sara and García-Ballesteros Ramírez, Juan José and Colina Brito, Mónica and Sanchez Aniorte, Maria Isabel and Molpeceres Álvarez, Carlos Luis (2011). Selective ablation with UV lasers of a-Si:H thin film solar cells in direct scribing configuration. "Applied Surface Science", v. 257 (n. 12); pp. 5230-5236. ISSN 0169-4332. https://doi.org/10.1016/j.apsusc.2010.09.088.

Li, Chuang and Cordovilla Baró, Francisco and Jagdheesh, Radhakrishnan and Ocaña Moreno, José Luis (2018). Design Optimization and Fabrication of a Novel Structural SOI Piezoresistive Pressure Sensor with High Accuracy. "Sensors" (n. 18); pp.. ISSN 1424-8220. https://doi.org/10.3390/s18020439.

Lavin Hueros, Alvaro and Casquel del Campo, Rafael and Sanza Gutiérrez, Francisco Javier and Laguna Heras, Maria Fe and Holgado Bolaños, Miguel (2013). Efficient design and optimization of bio-photonic sensing cells (BICELLs) for label free biosensing. "Sensors and Actuators B: Chemical", v. 176 ; pp. 753-760. ISSN 0925-4005. https://doi.org/10.1016/j.snb.2012.09.058.

M

Morales Furió, Miguel and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and Holgado Bolaños, Miguel and Ocaña Moreno, José Luis (2010). Analysis of plasma thermal surface effects on the residual stress field induced by LSP in Al2024-t351. "Journal of Optoelectronics and Advanced Materials", v. 12 (n. 3); pp. 718-722. ISSN 1454-4164.

Molpeceres Álvarez, Carlos Luis and García-Ballesteros Ramírez, Juan José and Lauzurica Santiago, Sara and Vicente y Oliva, Jesus de and Ocaña Moreno, José Luis (2008). Micromecanizado Láser de Componentes de Gran calidad de Acabado Superficial. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 511-516. ISSN 0212-5072.

Morales Furió, Miguel and Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis and Porro González, Juan Antonio and García y Beltrán, Ángel (2008). Model based optimization criteria for the generation of deep compressive residual stress fields in high elastic limit metallic alloys by ns-laser shock processing. "Surface and Coatings Technology", v. 202 (n. 11); pp. 2257-2262. ISSN 0257-8972. https://doi.org/10.1016/j.surfcoat.2007.12.007.

Morales Furió, Miguel and Molpeceres Álvarez, Carlos Luis and Porro González, Juan Antonio and García Beltrán, Ángel and Ocaña Moreno, José Luis (2010). Numerical Thermo-Mechanical Modelling Of Stress Fields and Residual Constraints in Metallic Targets Subject To Laser Shock Processing. "Materials Science Forum", v. 638-64 ; pp. 2682-2687. ISSN 1662-9752. https://doi.org/10.4028/www.scientific.net/MSF.638-642.2682.

Medina, Nieves and Vicente y Oliva, Jesus de (2014). Force Sensor Characterization Under Sinusoidal Excitations. "Sensors", v. 14 (n. 10); pp. 18454-18473. ISSN 1424-8220. https://doi.org/10.3390/s141018454.

O

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Blasco Litago, Manuel and Molpeceres Álvarez, Carlos Luis and Iordachescu, Danut and Gomez-Rosas, G. and Rubio-Gonzalez, C. (2010). Induction of Engineered Residual Stresses Fields and Associate Surface Properties Modification by Short Pulse Laser Shock Processing. "Materials Science Forum", v. 638-64 ; pp. 2446-2451. ISSN 1662-9752. https://doi.org/10.4028/www.scientific.net/MSF.638-642.2446.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2012). Mechanical properties enhancement of high reliability metallic materials by laser shock processing. "Materials Science Forum", v. 706-70 ; pp. 2565-2570. ISSN 0255-5476. https://doi.org/10.4028/www.scientific.net/MSF.706-709.2565.

Ortega, Pablo and Orpella, A. and Martín, Isidro and López Rodríguez, Gema and Voz, C. and Sanchez Aniorte, Maria Isabel and Molpeceres Álvarez, Carlos Luis and Alcubilla, R. (2012). Laser-fired contact optimization in c-Si solar cells. "Progress in Photovoltaics", v. 20 (n. 2); pp.. ISSN 1062-7995. https://doi.org/10.1002/pip.1115.

P

Porro González, Juan Antonio and Morales Furió, Miguel and Molpeceres Álvarez, Carlos Luis and Sanchez Perez, Angel M. and Ocaña Moreno, José Luis (2008). Análisis de Tensiones Residuales Inducidas en Aleaciones Metálicas por Tratamientos Superficiales mediante Ondas de Choque Generadas por Láser. "Anales de Ingeniería Mecánica", v. 8 ; pp. 815-820. ISSN 0212-5072.

R

Rio Redondo, Emma del and Sampedro, Jesus and Dogo, Harun and Caturla Terol, Maria Jose and Caro, Magdalena and Caro, Alfredo and Perlado Martín, José Manuel (2011). Formation energy of vacancies in FeCr alloys: Dependence on Cr concentration. "Journal of Nuclear Materials", v. 408 (n. 1); pp. 18-24. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2010.10.021.

S

Scutelnicu, Elena and Iordachescu, Mihaela and Iordachescu, Danut (2008). Modification of Materials Local Properties by Friction Stir Processing. "Buletinul Institutului Politehnic din Iaşi. Secţia Construcţii de maşini", v. LIV (L (n. 3); pp. 77-86. ISSN 1011-2855.

Sanchez Aniorte, Maria Isabel and Barrio, R. and Casado, A. and Morales Furió, Miguel and Carabe, J. and Gandia, J.J. and Molpeceres Álvarez, Carlos Luis (2012). Optimization of laser-firing processes for silicon-heterojunction solar-cell back contacts. "Applied Surface Science", v. 258 (n. 23); pp. 33-35. ISSN 0169-4332. https://doi.org/10.1016/j.apsusc.2011.09.108.

T

Trdan, Uros and Porro González, Juan Antonio and Ocaña Moreno, José Luis and Grum, Janez (2012). Laser shock peening without absorbent coating (LSPwC) effect on 3D surface topography and mechanical properties of 6082-T651 Al alloy. "Surface and Coatings Technology", v. 208 ; pp. 109-116. ISSN 0257-8972. https://doi.org/10.1016/j.surfcoat.2012.08.048.

V

Vicente y Oliva, Jesus de and Molpeceres Álvarez, Carlos Luis and Guarneiros, O. and García-Ballesteros Ramírez, Juan José (2008). Calibración de Microscopios Confocales. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 307-312. ISSN 0212-5072.

Vicente Oliva, Jesús de and Sanchez Perez, Angel M. and Berzal Rubio, Miguel and Maresca, Piera and Gomez Garcia, Emilio (2014). Uncertainty in ellipse fitting using a flatbed scanner: development and experimental verification. "Measurement Science and Technology", v. 25 (n. 1); pp. 1-10. ISSN 0957-0233. https://doi.org/10.1088/0957-0233/25/1/015005.

Vicente Oliva, Jesús de and Holgado Bolaños, Miguel and Lavin Hueros, Alvaro and Sanza Gutiérrez, Francisco Javier and Casquel del Campo, Rafael and Laguna Heras, Maria Fe (2014). Uncertainty in optical bio-sensors due to the spectral displacement of the interference modes of the transduction signal. Incertidumbre en bio-sensores ópticos asociada al desplazamiento espectral de los modos de interferencia de la señal de transducción. "Optica Pura y Aplicada", v. 47 (n. 1); pp. 27-34. ISSN 2171-8814. https://doi.org/10.7149/OPA.47.1.27.

  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM