Browse by Department

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Name | Item Type | No Grouping
Jump to: B | C | D | G | H | I | L | M | O | S | V
Number of items: 37.

B

Barriuso, S. and Carreón, H. and Porro González, Juan Antonio and González-Carrasco, J. L. and Ocaña Moreno, José Luis (2013). Assessment of laser peening induced effects on Ti6Al4V by non-destructive measurements. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid. pp. 1-6.

C

Casquel del Campo, Rafael and Lavin Hueros, Alvaro and Sanza Gutiérrez, Francisco Javier and Laguna Heras, Maria Fe and López, A. and Holgado Bolaños, Miguel (2013). Characterization of the Performance of Optical Label-Free Biosensors. In: "EUROMAT 2013", 08/09/2013 - 13/02/2014, Sevilla, España. pp. 50-100.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Ocaña Moreno, José Luis (2008). Optimization of interferometric photonic cells for biochemical sensing based on advanced high sensitivity optical techniques. In: "1ª Conferencia Española de Nanofotónica (CEN2008)", 02/04/2008-04/04/2008, Tarragona. pp. 151-152.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and Lavin Hueros, Alvaro and Angulo Barrios, Carlos and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Ocaña Moreno, José Luis (2008). Vertical resonant microcativites based on pillars analyzed by beam profile ellipsometry and reflectometry. In: "XXII Eurosensors (2008)", 07/09/2008-10/09/2008, Dresden (Alemania). ISBN 978-3-00-025217-4. pp. 1577-1580.

D

Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Porro González, Juan Antonio and Correa, C. and Ocaña Moreno, José Luis (2013). Effect of Thermal Relaxation on LSP Induced Residual Stresses and Fatigue Life Enhancement of AISI 316L stainless steel. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

G

Gámez Mejías, María de Linarejos and Gamez Mejias, Berta and Caturla Terol, Maria Jose and Terentyev, D. and Perlado Martín, José Manuel and Malerba, L. and Perlado Martín, José Manuel (2010). Resistivity Recovery curves of electron-irradiated FeCr alloys with Object Kinetic Monte Carlo: influence of Cr interctions.. In: "19th Topical Meeting on the Technology of Fusion Energy", 07/11/2010 - 11/11/2010, Las Vegas, EEUU.

Gamez Mejias, Berta and Gámez Mejías, María de Linarejos and Caturla Terol, Maria Jose and Terentyev, D. and Malerba, L. and Perlado Martín, José Manuel (2010). Simulations of Resistivity Recovery curves of electron-irradiated dilute FeCr alloys using an Object Kinetic Monte Carlo Model.. In: "26th Symposium on fusion technology", 27/09/2010 - 01/10/2010, Oporto, Portugal.

Gámez Mejías, María de Linarejos and Gamez Mejias, Berta and Caturla Terol, Maria Jose and Terentyev, D. and Perlado Martín, José Manuel (2010). The Importance of the Interaction Radius Between Cr and Self-interstitial Fe in Object Kinetic Monte Carlo Calculations of Irradiated FeCr Diluted Alloys. In: "10th International Conference on Computer Simulations of Radiation Effects in Solids", 19/07/2010 - 23/07/2010, Cracovia, Polonia.

Garcia Garcia, Oscar and Muñoz Martín, David and García-Ballesteros Ramírez, Juan José and Chen, Yu and Morales Furió, Miguel and Carabe, J. and Gandia, J.J. and Molpeceres Álvarez, Carlos Luis (2013). Experimental and numerical study of cw green laser crystallization of a-Si:H thin films. In: "Lasers and Electro-Optics Europe (CLEO EUROPE/IQEC), 2013 Conference on and International Quantum Electronics Conference", 12/05/2013 - 16/05/2013, MUNICH. ISBN 978-1-4799-0593-5. p. 1.

H

Holgado Bolaños, Miguel and Laguna Heras, Maria Fe and Casquel del Campo, Rafael and Sanza Gutiérrez, Francisco Javier and Lavin Hueros, Alvaro and López, A. and Bañuls, María José and Barrios, C.A. and Canalejas Tejero, Victor and Puchades, Rosa (2013). Biophotonic Sensing Cells (BICELLs) for label-free biosensing. In: "EUROMAT 2013", 08/09/2013 - 13/02/2014, Sevilla, España. pp. 1-3.

Holgado Bolaños, Miguel and Sanza Gutiérrez, Francisco Javier and Lavin Hueros, Alvaro and Casquel del Campo, Rafael and Laguna Heras, Maria Fe and Vicente, J. de and Lópeza, A. and Bañuls, María José and Barrios, C.A. and Canalejas Tejero, Victor and Puchades, Rosa (2013). Biophotonic Sensing Cells Optimization for label-free biosensing. In: "OPTOEL 2013. VIII Reunión Española de Optoelectrónica", 10-12 julio 2013, Alcalá de Henares. Madrid.. ISBN 978-84-88754-21-9.

I

Iordachescu, Danut and Porro González, Juan Antonio and Iordachescu, Mihaela and Ruiz Hervías, Jesús and Ocaña Moreno, José Luis and Vilaca, Pedro (2011). Characterization Of Friction Stir Welded Joints Of Aa 2024-T351 - Native Vs. Treated By Laser Shock Processing. In: "7 th International Conference on Materials Science & Engineering – BRAMAT 2011", 24/02/2011 - 26/02/2011, Poiana Brasov, Rumania. pp. 63-66.

Iordachescu, Danut and Birsan, Dan and Iordachescu, Mihaela and Ocaña Moreno, José Luis and Porro González, Juan Antonio (2009). FEM model and experiments for friction stir spot welding of AA6061-T4. In: "8th International Conference on Trends in Welding Research 2008", 01/06/2008-06/06/2008, Pine Mountain, Georgia (EE.UU.). ISBN 978-1-615-03002-6.

Ivetic, G. and Meneghin, I. and Troiani, E. and Molinari, G. and Lanciotti, A. and Ocaña Moreno, José Luis and Ristori, V. and Morales Furió, Miguel and Porro González, Juan Antonio and Plaisier, J. and Lausi, A. (2011). The Effect of Sequence of Operations on Fatigue Life of LSP Treated Open-hole Aluminium Specimens. In: "3rd International Conference on Laser Peening", 11/10/2011 - 14/10/2011, Osaka, Japón.

Iordachescu, Mihaela and Scutelnicu, Elena and Iordachescu, Danut and Ocaña Moreno, José Luis (2008). Welding in solid state. In: "1er Congreso Internacional de Soldadura y Tecnologías de Unión", 07/10/2008-09/10/2008, Madrid, España. ISBN 978-84-934316-4-8.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Ocaña Moreno, José Luis and Porro González, Juan Antonio and Ruiz Hervías, Jesús (2013). LSP Influence on Mechanical Properties of Thin Dissimilar Laser Welded Joints. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

L

Laguna Heras, Maria Fe and Sanza Gutiérrez, Francisco Javier and Ceresuela Soria, Jose Luis and Lavin Hueros, Alvaro and Casquel del Campo, Rafael and Suarez, T. and Holgado Bolaños, Miguel (2013). Label-free biosensing for dry eye by Means of BICELLS. In: "BITE 2013 : 3rd International Conference on Bio-Sensing Technology", 13th - 15th May 2013, Sitges, España.

M

Molpeceres Álvarez, Carlos Luis and Muñoz Martín, David and Sánchez, Isabel and Morales Furió, Miguel and Colina Brito, Mónica and Martín, Isidro and Ortega, Pablo and Voz, C. and Alcubilla, R. (2013). Laser Processes for Contact Optimization in c-Si Solar Cells. In: "Advanced Solid - State Laser Congress", 27 October - 01 November 2013, París (FRANCIA).

Molpeceres Álvarez, Carlos Luis and Colina Brito, Mónica and Muñoz Martín, David and Martín, Isidro and Ortega, Pablo and Sánchez, Isabel and Morales Furió, Miguel and Lauzurica Santiago, Sara and García Ballesteros, Juan J. and Voz, C. and López Rodríguez, Gema and Morales, Ana Belén and Alcubilla, R. (2013). New laser-based approaches to improve the passivation and rear contact quality in high effiency crystalline silicon solar cells. In: "Laser Material Processing for Solar Energy Devices II", San Diego, California, United States, 25/08/2013. https://doi.org/10.1117/12.2026202.

O

Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Holgado Bolaños, Miguel and García-Ballesteros Ramírez, Juan José and Lauzurica Santiago, Sara and Porro González, Juan Antonio and Garcia Garcia, Oscar and Iordachescu, Danut (2009). Application of high intensity short pulse lasers to precision micromanufacturing. In: "Conference “Diaspora in Cercetarea Stiintifica si Invatamantul Superior din Romania", 17/09/2008-19/09/2008, Bucarest, Rumania.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos and Gil Santos, Andrea (2012). Application of high-intensity short-pulse lasers to the mechanical and surface properties improvement of high reliability metallic components by shock processing. In: "VII Internacional Conference BT/LA", 18/09/2012-21/09/2012, Saint Petersburg, Russia.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2011). Improvement of Mechanical Properties and Life Extension of High Reliability Structural Components by Laser Shock Processing. In: "Eco-Photonics 2011", 28/03/2011 - 30/03/2011, Estrasburgo, Francia.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and García-Ballesteros Ramírez, Juan José and Correa Guinea, Carlos (2011). Laser Shock Microformingof Thin Metal Sheets with ns Lasers. In: "Sixth International WLT Conference on Lasers in Manufacturing", 23/05/2011 - 26/05/2011, Munich, Alemania. https://doi.org/10.1016/j.phpro.2011.03.123.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos and Gil Santos, Andrea (2011). Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys. In: "8th international Conference on Industrial Tools and material Processing Technologies", 02/10/2011 - 05/10/2011, Ljubljana, Eslovenia.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Correa Guinea, Carlos and Colón Hernández, Cristóbal and Alonso Medina, Aurelia and Autric, Michele L. (2012). Physical characterization of laser interaction and shock generation in laser processing: coupled theoretical-experimental analysis. In: "International High Power Laser Ablation Conference (HPLA2012)", 30/04/2012 - 03/05/2014, Santa Fe, NM, USA.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Correa Guinea, Carlos and Colón Hernández, Cristóbal and Alonso Medina, Aurelia and Autric, Michele L. (2012). Physical characterization of laser interaction and shock generation in laser shock processing: coupled theoretical-experimental analysis. In: "Unspecified. pp. 209-218. https://doi.org/10.1063/1.4739875.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Molpeceres Álvarez, Carlos Luis and Porro González, Juan Antonio and Iordachescu, Danut (2008). Predictive assessment of plasma dynamics effects on the shock transformation of metallic alloys by laser shock processing. In: "International Conference. Modern Laser Applications. Indlas 2008", 20/05/2008-23/05/2008, Bran, Rumania.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and García Beltrán, Ángel (2008). Scientific and Technological Issues on the Application of High Intensity Lasers to Material Properties Modification: The case of Laser Shock Processing of Metallic Alloys. In: "International Conference Extreme Light Infraestructure", 16/09/2008-18/09/2008, Bucarest, Rumania.

Ocaña Moreno, José Luis and García Beltrán, Ángel and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and González González, José Manuel and Blasco Litago, Manuel (2008). Diseño y desarrollo de un laboratorio virtual de aplicaciones industriales con láser. In: "INECE'08 - II Jornadas internacionales U.P.M. sobre Innovación Educativa y Convergencia Europea", 09/12/2008-11/12/2008, Madrid, España. ISBN 978-84-691-9885-8. pp. 1-15.

Ocaña Moreno, José Luis and Diaz Muñoz, Marcos and Porro González, Juan Antonio and Ruiz de Lara de Luis, Leonardo and Correa, C. (2014). Effect of Thermal Treatments on the Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing. In: "THERMEC 2013, 8th International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties Applications", 2/12/2013 - 6/12/2013, Las Vegas, USA. ISBN 978-3-03835-073-6.

Ocaña Moreno, José Luis (2013). High Intensity Lasers Application to Advanced Materials Processing: Laser Peening and Related Processes. In: "ELI Beamlines Summer School (ELISS 2013)", 23/06/2013 - 28/06/2013, Prague, Czech Republic.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa, C. and Gil Santos, Andrea and Peral Jiménez, David (2013). Induction of engineered residual stresses fields and enhancement of fatigue life of high reliability metallic components by laser shock processing. In: "International Conference on High-Power Laser Materials Processing - Lasers, Beam Delivery, Diagnostics, and Applications II.", 02/02/2013 - 7/02/2013, San Francisco, California (EE. UU.). ISBN 9780819493729.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Garcia Garcia, Oscar and Porro González, Juan Antonio and Correa Guinea, Carlos and García-Ballesteros Ramírez, Juan José (2013). Laser Shock Micro-Forming as an Emerging Technique for Microsystems Shaping and Adjustment. In: "4M2013 Conference. 10th International Conference on Multi-Material Micro Manufacture", 08/10/2013-10/10/2013, San Sebastián, España. ISBN 978-981-07-7248-2.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Correa Guinea, Carlos and Morales Furió, Miguel and García-Ballesteros Ramírez, Juan José (2013). Laser Shock Microforming of Thin Metal Sheets with Q-Switched ns Lasers. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2012). Laser shock processing: an emerging technique for the improvement of fatigue life and surface properties of high reliability metallic components. In: "4th International Conference on Materials Science and Technologies (ROMAT 2012)", 17/10/2012 -19/10/2012, Bucharest, Romania.

S

Sanchez Aniorte, Maria Isabel and Muñoz Martín, David and Morales Furió, Miguel and Ortega, Pablo and Martín, Isidro and Colina Brito, Mónica and Alcubilla, R. and Molpeceres Álvarez, Carlos Luis (2012). Influence of laser wavelength on Laser-Fired contacts for crystalline silicon solar cells. In: "27th EU PVSEC 2012", 24/09/2012 - 28/09/2012, Frankfurt, Alemania.

V

Vicente y Oliva, Jesus de and Holgado Bolaños, Miguel and Lavin Hueros, Alvaro and Sanza Gutiérrez, Francisco Javier and Casquel del Campo, Rafael and Laguna Heras, Maria Fe (2013). Incertidumbre en bio-sensores ópticos asociada al desplazamiento espectral de los modos de interferencia de la señal de transducción. In: "VIII Reunión Española de Optoelectrónica (OPTOEL 2013)", 10/06/2013 - 13/06/2014, Alcalá de Henares, Madrid. p. 1.

  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM