Browse by Department

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Name | Item Type | No Grouping
Jump to: A | C | E | F | G | L | M | S | T
Number of items: 27.

A

Arenas Reina, José Manuel and Alia, Cristina and Blaya Haro, Fernando and Sanz Lobera, Alfredo (2011). Multi-criteria selection of structural adhesives to bond ABS parts obtained by rapid prototyping. "International Journal of Adhesion And Adhesives", v. 33 ; pp. 67-74. ISSN 0143-7496. https://doi.org/10.1016/j.ijadhadh.2011.11.005.

Arribaqs Arribas, Carmen and González Prolongo, Margarita and Gonzalez Prolongo, Margarita and Salom Coll, Catalina and Sánchez Cabezudo, Marta and Moriche Tirado, R. and Prolongo, S. G. (2017). Nanocompuestos grafeno-nanotubos de carbono-epoxi influencia de la absorción de agua en las propiedades = Graphene-Carbon Carbon Nanotubes Thermoseting Epoxy Materials: Water Absortion Influence on their Properties. "Materiales compuestos", v. 3 (n. 1); pp. 90-94. ISSN 2531-0739.

C

Casado Corpas, José and Sanz Lobera, Alfredo and González Requena, Ignacio and Sevilla, L. (2016). A revision of the flutter margin method to predict in real-time the limit cycle oscillations onset speed with structural freeplay present in the plunge axis. "Proceedings of the Institution of Mechanical Engineers : Journal of Aerospace Engineering", v. 231 (n. 1); pp. 124-142. ISSN 0954-4100. https://doi.org/10.1177/0954410016638867.

Casado Corpas, José and López Díez, Jesús (2008). Flutter margin with non-linearities: real-time prediction of flutter onset speed. "Journal of Aerospace Engineering", v. 222 (n. 6); pp. 921-929. ISSN 0954-4100. https://doi.org/10.1243/09544100JAERO251.

E

Encinar del Pozo, Mario and Guzmán Solís, Eduardo and González Prolongo, Margarita and González Rubio, Ramón and Sandoval, Claudia and González-Nilo, Fernando D. and Gargallo González, Ligia and Radic Foschino, Deodato (2008). Dielectric and dynamic mechanical study of the mobility of poly(t-butylacrylate) chains in diblock copolymers: polystyrene-b-poly(t-butylacrylate). "Polymer", v. 49 (n. 26); pp. 5650-5658. ISSN 0032-3861. https://doi.org/10.1016/j.polymer.2008.10.023.

Encinar, Mario and Martínez-Gomez, Aranzazu and G. Rubio, Ramon and Perez, Ernesto and Bello, Antonio and González Prolongo, Margarita (2012). X-Ray Diffraction, Calorimetric and Dielectric Relaxation Study of the Amorphous and Smectic States of a Main Chain Liquid Crystalline Polymer. "The Journal of Physical Chemistry B", v. 116 ; pp. 9846-9559. ISSN 1089-5647. https://doi.org/10.1021/jp305907u.

F

Flores, A. and Ania, F. and Arribas Arribas, Carmen and Ochoa, A. and Scholtyssek, S. and Baltá-Calleja, F.J. and Baer, E. (2012). Confined crystallization of nanolayered poly(ethylene terephthalate) using X-ray diffraction methods. "Polymer", v. 53 (n. 18); pp. 3986-3993. ISSN 0032-3861. https://doi.org/10.1015/j.polymer.2012.06.047.

Fernández, R. and Sanz Lobera, Alfredo and Pindado Carrion, Santiago and Núñez, P. (2012). Effect of the Reference Line on Main Roughness Parameters. "Advanced Materials Research", v. 498 ; pp. 73-78. ISSN 1022-6680. https://doi.org/10.4028/www.scientific.net/AMR.498.73.

G

Güemes Gordo, Jesús Alfredo and Sierra Pérez, Julian and Rodellar, J. and Mujica, Luis Eduardo (2013). A robust procedure for damage detection from strain measurements based on principal component analysis. "Key Engineering Materials", v. 558 ; pp. 128-138. ISSN 1013-9826. https://doi.org/10.4028/www.scientific.net/KEM.558.128.

Guemes Gordo, Jesus Alfredo and Pozo Morales, Angel Renato and Fernandez Lopez, Antonio and Fernandez Sanchez-Romate, Xoan Xose and Sánchez, María and Ureña, Alejandro (2020). Directional response of Randomly dispersed Carbon Nanotubes strain sensors. "Sensors", v. 20 (n. 10); pp. 2980-2894. ISSN 1424-8220. https://doi.org/10.3390/s20102980.

García del Cid, M.A. and Gonzalez Prolongo, Margarita and Salom Coll, Catalina and Sanchez-Cabezudo Tirado, Marta and Masegosa Fanego, Rosa María (2014). Influence of different organoclays on the curing, morphology, and dynamic mechanical properties of an epoxy adhesive. "Journal of Adhesion", v. 90 (n. 10); pp. 817-834. ISSN 0021-8464. https://doi.org/10.1080/00218464.2014.903656.

Gonzalez Prolongo, Margarita and Salom Coll, Catalina and Arribas Arribas, Carmen and Sanchez-Cabezudo Tirado, Marta and Masegosa Fanego, Rosa Maria and Gonzalez Prolongo, Silvia (2015). Influence of graphene nanoplatelets on curing and mechanical properties of graphene/epoxy nanocomposites.. "Journal of Thermal Analysis And Calorimetry", v. 125 ; pp. 1-8. ISSN 1388-6150. https://doi.org/10.1007/s10973-015-5162-3.

Guzmán Solís, Eduardo and Ortega, Francisco and González Prolongo, Margarita and Starov, Victor M. and González Rubio, Ramón (2011). Influence of the molecular architecture on the secondary relaxations of Poly(styrene-co-methylmethacrylate) copolymers. "The European Physical Journal, E", v. 34 (n. 13); pp. 134-140. ISSN 1292-8941. https://doi.org/10.1039/C1CP21967G.

Gonzalez Prolongo, Margarita and Del Rosario, G. and Prolongo, S. G. and Moriche, R. and Jimenez-suarez, A. and Urena, A. (2016). Joule effect self-heating of epoxy composites reinforced with graphitic nanofillers. "Journal of Polymer Science", v. 23 ; p. 189. ISSN 1022-9760. https://doi.org/10.1007/s10965-016-1092-4.

Guemes Gordo, Jesus Alfredo and Fernandez Lopez, Antonio and Fernandez Diaz-maroto, Patricia and Lozano Martin, Angel and Sierra Perez, Julian (2018). Structural health monitoring in composite structures by fiber-optic sensors. "Sensors", v. 18 (n. 4); p. 1094. ISSN 1424-8220. https://doi.org/10.3390/s18041094.

L

Larrañaga Valsero, Beatriz Maria and Fernández López, A. and Güemes Gordo, Jesús Alfredo (2018). Detección de arrugas en laminados de fibra de vidrio y de carbono.. "Materiales compuestos", v. 2 (n. 4); pp. 43-51. ISSN 2531-0739.

M

MacDowell, Luis G. and Benet, Jorge and Katcho, Nebil A. and García Palanco, José María (2014). Disjoining pressure and the film-height-dependent surface tension of thin liquid films: New insight from capillary wave fluctuations. "Advances in Colloid and Interface Science", v. 206 ; pp. 150-171. ISSN 0001-8686. https://doi.org/10.1016/j.cis.2013.11.003.

S

Sanz, Alfredo and Negre, A. A. and Fernandez, R. and Calvo Narvaez, Felix (2013). Comparative study about the use of two and three-dimensional methods in surface finishing characterization. "Procedia Engineering", v. 63 ; pp. 913-921. ISSN 1877-7058. https://doi.org/10.1016/j.proeng.2013.08.267.

Salom Coll, Catalina and Gonzalez Prolongo, Margarita (2017). Curado de nanocompuestos grafeno-epoxi : influencia de la relación entrecruzante/resina = Curing of graphene-epoxy nanocomposites : influence of cross-linking/resin ratio. "Materiales compuestos", v. 12 (n. 4); pp. 1-4. ISSN 2531-0739.

Sierra Pérez, Julian and Güemes Gordo, Jesús Alfredo and Mujica, Luis Eduardo (2013). Damage detection by using FBGs and strain field pattern recognition techniques. "Smart Materials And Structures", v. 22 (n. 2); pp. 25011-25021. ISSN 0964-1726. https://doi.org/10.1088/0964-1726/22/2/025011.

Sanz Lobera, Alfredo and López Rodrigo, Daniel and López Baos, Andrés and Lozano, Fermín and Paricio, Ignacio (2017). Some considerations about the development of software measurement standards in surface finish. "International Journal of Mechatronics and Manufacturing Systems", v. 10 (n. 2); pp. 130-151. ISSN 1753-1047. https://doi.org/10.1504/IJMMS.2017.084797.

Sanz Lobera, Alfredo and González, Ignacio and Calvo Narvaez, Felix and Andres, Eva María (2017). Some examples for the automatic generation of self-assessment queries in manufacturing processes engineering subjects. "Materials Science Forum", v. 903 ; pp. 24-31. ISSN 1662-9752. https://doi.org/10.4028/www.scientific.net/MSF.903.24.

Sanchez-Cabezudo Tirado, Marta and Gonzalez Prolongo, Margarita and Salom Coll, Catalina and García Del Cid Rodriguez, Mª Amor and Masegosa Fanego, Rosa Maria (2016). Ternary nanocomposites: curing, morphology and mechanical properties of epoxy/thermoplastic/organoclay systems. "Polymer Composites", v. 37 (n. 7); pp. 2184-2195. ISSN 0272-8397. https://doi.org/10.1002/pc.23397.

Salom Coll, Catalina and Calvo del Valle, Silvia and Gonzalez Prolongo, Margarita and Masegosa Fanego, Rosa María (2014). Unsaturated polyester-poly(epsilon-caprolactone) hybrid nanocomposites: Thermal-mechanical properties. "Polymer composites", v. 35 (n. 5); pp. 827-838. ISSN 0272-8397. https://doi.org/10.1002/pc.22726.

Sanz Lobera, Alfredo and Gonzalez Requena, Ignacio and Castejon Rosauro, Agustin and Casado Corpas, José (2011). Using Virtual Reality in the teaching of manufacturing processes with material removal in CNC Machine-Tools. "Materials Science Forum", v. 692 ; pp. 112-119. ISSN 0255-5476.

T

Tarín Remohí, Pascual and Alonso, I. and García Simón, Antonio and Badía Pérez, José María and Martín Piris, Nuria (2008). Characterization of the Alpha-Beta and Martensitic Transformations en the Ti-6Al-2Sn-4Zr-6Mo Alloy. "Materials Science & Engineering. A, Structural Materials", v. 481-48 ; pp. 559-561. ISSN 0921-5093. https://doi.org/10.1016/j.mseo.2006.12.193.

Toribio, A. and Salom Coll, Catalina and Gonzalez Prolongo, Margarita and Martínez Martínez, A. and Prolongo, S. G. (2017). Efecto del contenido de entrecruzante y tipo de grafeno en las propiedades termo-mecánicas de nanocompuestos = Effect of the cross-linker content and type of graphene on the thermomechanical properties of nanocomposites. "Materialeas Compuestos", v. 12 (n. 4); pp. 1-4. ISSN 2531-0739.

  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM