Browse by Department

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Name | Item Type | No Grouping
Number of items: 34.

Somolinos Sánchez, José Andrés and Morales Cabrera, Rafael and García García, Alfonso and Morón Fernández, Carlos (2011). Amorphous piezoresistive and piezoelectric sensors for robotics applications. "Physica Status Solidi C", v. 11-12 (n. 8); pp. 3175-3178. ISSN 1610-1642. https://doi.org/10.1002/pssc.201000711.

Rodríguez, A. and Gutierrez González, S. and Prieto Barrio, Maria Isabel and Cobo Escamilla, Alfonso and Calderón, V. (2015). Analysis of long-term corrosion behavior in mortars containing recycled ladle furnace slag using computerized tomography and SEM. "Materials And Corrosion-Werkstoffe Und Korrosion", v. 66 (n. 3); pp. 199-205. ISSN 0947-5117. https://doi.org/10.1002/maco.201407697.

Vidales Barriguete, Alejandra and Atanes Sánchez, Evangelina and Río Merino, Mercedes del and Piña Ramírez, Carolina (2020). Analysis of the improved water-resistant properties of plaster compounds with the addition of plastic waste. "Construction and building materials", v. 230 ; ISSN 0950-0618. https://doi.org/10.1016/j.conbuildmat.2019.116956.

Gil López, Tomás and Gálvez Huerta, Miguel A. and O'Donohoe, Paul G. and Castejón Navas, Juan and Diéguez Elizondo, Pedro M. (2017). Analysis of the influence of the return position in the vertical temperature gradient in displacement ventilation systems for large halls. "Energy and buildings", v. 140 ; pp. 371-379. ISSN 0378-7788. https://doi.org/10.1016/j.enbuild.2017.02.017.

Herrero Del Cura, Sofía and López Zaldívar, Óscar and Lozano Díez, Rafael Vicente and Mayor Lobo, Pablo Luis and Hernández Olivares, Francisco (2019). Análisis Experimental de la incorporación de fibras en el comportamiento mecánico de compuestos de escayola-caucho NFU = Experimental analysis of the incorporation of different fibers in the mechanical behaviour plaster and ELT rubber composites. "Anales de Edificación", v. 5 (n. 3); pp. 1-7. ISSN 2444-1309. https://doi.org/10.20868/ade.2019.4060.

Morón Fernández, Carlos (2016). Aprendizaje de la Domótica basado en prácticas experimentales y problemas. "Opción", v. 32 (n. 11); pp. 990-1003. ISSN 1012-1587.

Morón Fernández, Carlos and Ferrández Vega, Daniel and Saiz, Pablo and Morón Barrios, Alberto (2019). Automatic system for detection and positioning of impacts in metals based on Arduino. "Shock and Vibration", v. 2019 ; pp. 1-8. ISSN 1070-9622. https://doi.org/10.1155/2019/9675898.

Vidales Barriguete, María Alejandra and Piña Ramírez, Carolina and Serrano Somolinos, Rubén and Río Merino, Mercedes del and Atanes Sánchez, Evangelina (2021). Behavior resulting from fire in plasterboard with plastic cable waste aggregates. "Journal of Building Engineering", v. 40 ; ISSN 2352-7102. https://doi.org/10.1016/j.jobe.2021.102293.

Cobo Escamilla, Alfonso and Gonzalez García, M. De Las Nieves and Castaño Cabañas, Angel and Prieto Barrio, Maria Isabel (2014). Calibration of calculation models of wooden guardrails with Operational Modal Analysis. "International journal of engineering science and innovative technology", v. 3 (n. 3); pp. 618-630. ISSN 2319-5967.

Olmedo Zazo, Fernando Israel and Cobo Escamilla, Alfonso and Díaz, Borja and Navarro Gabaldón, Francisco and Vidal Mesa, María Ángeles (2015). Caracterización mecánica experimental de un hormigón ligero estructural = Experimental mechanical characterisation of a structural lightweight aggregate concrete. "Anales de Edificación", v. 1 (n. 1); pp. 23-32. ISSN 2444-1309. https://doi.org/10.20868/ade.2015.3036.

Fernández Martín, Rafael and Santa Cruz Astorqui, Jaime and Arbaiza Blanco-Soler, Silvia and Río Merino, Mercedes del (2015). Caracterización tipológica del espacio edificado de las casas de corredor: el caso de las ciudadelas del casco histórico de La Habana y las corralas madrileñas = Typological characterization of built space of corridor houses: the case of ciudadelas of the historic town in Havana and the corridor houses in Madrid. "Informes de la construcción", v. 68 (n. 541); ISSN 0020-0883. https://doi.org/10.3989/ic.15.036.

Cobo Escamilla, Alfonso and Martínez Bastidas, David and González García, Nieves and Medina Sanchez, Eduardo and Bastidas, J.M. (2011). Ductilidad del acero inoxidable bajo en níquel para estructuras de hormigón armado / Ductility in a new low nickel stainless steel for reinforced concrete. "Materiales de Construccion", v. 61 (n. 304); pp. 613-620. ISSN 0465-2746. https://doi.org/10.3989/mc.2011.57210.

Ferrández Vega, Daniel and Yedra, Engerst and Morón Fernández, Carlos and Morón Barrios, Alberto (2020). Ensayos alternativos para la determinación del tiempo de fraguado. Métodos capacitivo y resistivo = Alternative tests for the determination of the setting time. Capacitive and resistive methods. "Dyna", v. 95 (n. 3); pp. 294-298. ISSN 0012-7361. https://doi.org/10.6036/9741.

López-Asiain, Juan and González García, María de las Nieves and Morón Fernández, Carlos and Payán de Tejada, Alejandro (2019). Evolución de los materiales utilizados en redes de distribución de agua caliente. "Dyna Ingeniería e Industria", v. 94 (n. 4); pp. 390-394. ISSN 0012-7361. https://doi.org/10.6036/9019.

Aguilera Benito, Patricia and Piña Ramírez, Carolina and Varela Luján, Sheila (2021). Experimental analysis of passive strategies in houses with glass façades for the use of natural light. "Sustainability", v. 13 (n. 8652); pp. 1-15. ISSN 2071-1050. https://doi.org/10.3390/su13158652.

San Antonio González, Alicia and Santos Jiménez, María del Rocío and Río Merino, Mercedes del and González Cortina, Mariano and Viñas Arrebola, Carmen (2015). Feasibility of recycling CDW as raw material in gypsum composites. "Athens journal of technology & engineering", v. 2 (n. 3); pp. 149-159. ISSN 2241-8237. https://doi.org/10.30958/ajte.2-3-1.

López Zaldívar, Óscar and Mayor Lobo, Pablo Luis and Fernández Martínez, Francisco and Hernández Olivares, Francisco (2015). Improved cement mortars by addition of carbonated fly ash from solid waste incineration. "Materiales de Construcción", v. 65 (n. 319); pp.. ISSN 0465-2746. https://doi.org/10.3989/mc.2015.07114.

Lepore, Ester and Aguilera Benito, Patricia and Piña Ramírez, Carolina and Viccione, Giacomo (2021). Indoors ventilation in times of confinement by SARS-CoV-2 epidemic: a comparative approach between Spain and Italy. "Sustainable Cities and Society", v. 72 (n. 103051); ISSN 2210-6707. https://doi.org/10.1016/j.scs.2021.103051.

Ferrández Vega, Daniel and Saiz, Pablo and Morón Fernández, Carlos and Dorado Escribano, María Guadalupe and Morón Barrios, Alberto (2019). Inductive method for the orientation of steel fibers in recycled mortars. "Construction and building materials" (n. 222); pp. 243-253. ISSN 0950-0618. https://doi.org/10.1016/j.conbuildmat.2019.06.113.

López Zaldívar, Óscar and Lozano Díez, Rafael Vicente and Verdú Vázquez, María Amparo and Gil López, Tomás (2016). Inertización y valorización de cenizas volantes de residuos sólidos urbanos para la fabricación de morteros de cemento. "Dyna", v. 92 (n. 2); pp. 230-234. ISSN 0012-7361. https://doi.org/10.6036/8196.

Prieto Barrio, Maria Isabel and Cobo Escamilla, Alfonso and González García, María de las Nieves and Moreno Fernández, María Esther and Rosa García, M. Pilar de la (2015). Influence of assessment in the teaching-learning process in the higher education. "Procedia - Social and Behavioral Sciences", v. 176 ; pp. 458-465. ISSN 1877-0428. https://doi.org/10.1016/j.sbspro.2015.01.497.

García Olea, Alberto and López-Zaldívar, Óscar (2020). La geometría moderna de Boullée frente a la geometría clásica de Kahn: una contradicción aparente = Boullée's modern geometry versus Kahn's classical geometry: an apparent contradiction. "Anales de edificación", v. 6 (n. 1); pp. 1-11. ISSN 2444-1309. https://doi.org/10.20868/ade.2020.4449.

Pérez Martín, José Luis Javier (2017). La gestión en la arquitectura patrimonial y de nuestros centros históricos. "Building & Management", v. 1 (n. 1); pp. 27-37. ISSN 2530-8157. https://doi.org/10.20868/bma.2017.1.3522.

Morón Fernández, Carlos and Cabrera Mertens, Carolina and Morón, Alberto and García García, Alfonso and González Redondo, María Mercedes (2015). Magnetic sensors based on amorphous ferromagnetic materials: a review. "Sensors", v. 15 (n. 11); pp. 28340-28366. ISSN 1424-8220. https://doi.org/10.3390/s151128340.

Cobo Escamilla, Alfonso and Prieto Barrio, Maria Isabel and Martínez Pérez, Inmaculada and Moreno Fernández, María Esther (2015). Mechanical behavior of thermally activated building structures. "Magazine of concrete research", v. 67 (n. 6); pp. 271-281. ISSN 0024-9831. https://doi.org/10.1680/macr.14.00237.

Moron Fernandez, Carlos and Maganto Suárez, Fernando José and García García, Alfonso and Ramirez Fernandez, M. Puerto and Tremps Guerra, Enrique (2011). Monte Carlo simulation of circular grain growth. "Physica Status Solidi C", v. 11-12 (n. 8); pp. 3135-3138. ISSN 1610-1642. https://doi.org/10.1002/pssc.201000725.

Morón Fernández, Carlos and García García, Alfonso and Ferrández Vega, Daniel (2014). New system for measuring impact vibration on floor decking sheets. "Sensors", v. 15 (n. 1); pp. 635-641. ISSN 1424-8220. https://doi.org/10.3390/s150100635.

Moron Fernandez, Carlos and García García, Alfonso and Tremps Guerra, Enrique and Ignacio Vicens, Guillermo de and González Redondo, María Mercedes (2011). Optimización de las condiciones de electrodeposición para la obtención de núcleos sensores. "Revista Cubana de Física", v. 28 (n. 2); pp. 114-118. ISSN 0253-9268.

Vidales Barriguete, Alejandra and Piña Ramírez, Carolina and Kosior-Kazberuk, Marta and Krassowska, Julita (2018). Parámetros de la fractura del hormigón reforzado con fibras de basalto = Fracture parameters of basalt fiber reinforced concrete. "Anales de edificación", v. 4 (n. 3); pp. 52-58. ISSN 2444-1309. https://doi.org/10.20868/ade.2018.3800.

García García, Alfonso and Maganto Suárez, Fernando and Tremps Guerra, Enrique and Ramírez Fernández, M. Puerto and Morón Fernández, Carlos (2011). Study of helical induced anisotropy in amorphous ribbons for sensor applications. "Physica Status Solidi C", v. 11-12 (n. 8); pp. 3171-3174. ISSN 1610-1642. https://doi.org/10.1002/pssc.201000710.

Cobo Escamilla, Alfonso and Prieto Barrio, Maria Isabel and Llauradó Pérez, Nuria and Hosokawa Menéndez, Kenzo Jorge (2015). Technical subjects assessment : assessed items influence. "International journal of technical research and applications", v. Spec. (n. 30); pp. 66-69. ISSN 2320-8163.

Prieto Barrio, Maria Isabel and Cobo Escamilla, Alfonso and Rodríguez Sáiz, Ángel and González García, María de las Nieves (2014). The efficiency of surface-applied corrosion inhibitors as a method for the repassivation of corroded reinforcement bars embedded in ladle furnace slag mortars. "Construction and building materials", v. 54 ; pp. 70-77. ISSN 0950-0618. https://doi.org/10.1016/j.conbuildmat.2013.12.014.

Aguilera Benito, Patricia and Varela Luján, Sheila and Piña Ramírez, Carolina (2021). Thermal Behavior in Glass Houses through the Analysis of Scale Models. "Sustainability", v. 13 (n. 7970); pp. 1-17. ISSN 2071-1050. https://doi.org/10.3390/su13147970.

Cobo Escamilla, Alfonso and Moreno Fernandez, Maria Esther and Canovas, Francisco M. F. (2011). Variación de las características mecánicas de armaduras de alta ductilidad B500SD en función de su grado de corrosión / Mechanical properties variation of B500SD high ductility reinforcement regarding its corrosion degree. "Materiales de Construccion", v. 61 (n. 304); pp. 517-532. ISSN 0465-2746. https://doi.org/10.3989/mc.2011.61410.

  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM