Browse by Institution

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Name | Item Type | No Grouping
Jump to: A | B | C | E | F | G | M | O | P | S | T | V
Number of items: 41.

A

Arenas Reina, José Manuel and Alia, Cristina and Blaya Haro, Fernando and Sanz Lobera, Alfredo (2011). Multi-criteria selection of structural adhesives to bond ABS parts obtained by rapid prototyping. "International Journal of Adhesion And Adhesives", v. 33 ; pp. 67-74. ISSN 0143-7496. https://doi.org/10.1016/j.ijadhadh.2011.11.005.

B

Badía Pérez, José María (1981). Transformaciones estructurales de las aleaciones de aluminio de alta resistencia. Thesis (Doctoral), E.T.S.I. Aeronáuticos (UPM).

C

Calvo, S. and Salom Coll, Catalina and González Prolongo, Margarita and Masegosa Fanego, Rosa María (2010). Comportamiento Mecánico de Poliéster Insaturado Modificados con Poli(ε-Caprolactona) Reforzadas con Monmorillonita C30B. In: "XII Simposio Latinoamericano de Polímeros SLAP 2010 / X Congreso Iberoamericano de Polímeros CIP 2010", 13/07/2010 - 16/07/2010, San José, Costa Rica.

Casado Corpas, José and López Díez, Jesús (2008). Flutter margin with non-linearities: real-time prediction of flutter onset speed. "Journal of Aerospace Engineering", v. 222 (n. 6); pp. 921-929. ISSN 0954-4100. https://doi.org/10.1243/09544100JAERO251.

Calvo, S. and Arribas Arribas, Carmen and Masegosa Fanego, Rosa María and González Prolongo, Margarita and Salom Coll, Catalina (2011). Preparation and characterization of polyester resin-layered silicate containing reactive groups. In: "European Polymer Congress 2011", 26/06/2011 - 01/07/2012, Granada, España. p. 74.

Calvo del Valle, Silvia and Salom Coll, Catalina and González Prolongo, Margarita and Arribas Arribas, Carmen and García del Cid, A. and Masegosa Fanego, Rosa María (2013). Propiedades de nanocompuestos de matriz termoestable con nuevos organosilicatos laminares. In: "X Congreso Nacional de Materiales Compuestos", 02/07/2013 - 05/07/2013, Algeciras (Cadiz). pp. 255-260.

Calvo Narvaez, Felix and Rodríguez Monroy, Carlos (2014). Una metodología para el estudio de la maquinabilidad de aleaciones de aluminio-cobre. In: "12th Latin American and Caribbean Conference for Engineering and Technology . LACCEI 2014", 22-24 jul, Guayaquil, Ecuador. pp. 1-8.

E

Encinar del Pozo, Mario and Guzmán Solís, Eduardo and González Prolongo, Margarita and González Rubio, Ramón and Sandoval, Claudia and González-Nilo, Fernando D. and Gargallo González, Ligia and Radic Foschino, Deodato (2008). Dielectric and dynamic mechanical study of the mobility of poly(t-butylacrylate) chains in diblock copolymers: polystyrene-b-poly(t-butylacrylate). "Polymer", v. 49 (n. 26); pp. 5650-5658. ISSN 0032-3861. https://doi.org/10.1016/j.polymer.2008.10.023.

Encinar, Mario and Martínez-Gomez, Aranzazu and G. Rubio, Ramon and Perez, Ernesto and Bello, Antonio and González Prolongo, Margarita (2012). X-Ray Diffraction, Calorimetric and Dielectric Relaxation Study of the Amorphous and Smectic States of a Main Chain Liquid Crystalline Polymer. "The Journal of Physical Chemistry B", v. 116 ; pp. 9846-9559. ISSN 1089-5647. https://doi.org/10.1021/jp305907u.

F

Flores, A. and Ania, F. and Arribas Arribas, Carmen and Ochoa, A. and Scholtyssek, S. and Baltá-Calleja, F.J. and Baer, E. (2012). Confined crystallization of nanolayered poly(ethylene terephthalate) using X-ray diffraction methods. "Polymer", v. 53 (n. 18); pp. 3986-3993. ISSN 0032-3861. https://doi.org/10.1015/j.polymer.2012.06.047.

Fernández, R. and Sanz Lobera, Alfredo and Pindado Carrion, Santiago and Núñez, P. (2012). Effect of the Reference Line on Main Roughness Parameters. "Advanced Materials Research", v. 498 ; pp. 73-78. ISSN 1022-6680. https://doi.org/10.4028/www.scientific.net/AMR.498.73.

G

Güemes Gordo, Jesús Alfredo and Sierra Pérez, Julian and Rodellar, J. and Mujica, Luis Eduardo (2013). A robust procedure for damage detection from strain measurements based on principal component analysis. "Key Engineering Materials", v. 558 ; pp. 128-138. ISSN 1013-9826. https://doi.org/10.4028/www.scientific.net/KEM.558.128.

Gomez Parra, A. and Sanz Lobera, Alfredo and Marcos Barcena, M. (2011). Análisis Preliminar de la Influencia del Proceso de Torneado en la vida a fatiga de la Aleación de Aluminio UNS A92024-T351. In: "4th Manufacturing Engineering Society International Conference", 21/09/2011 - 23/09/2011, Cádiz, España. p. 8.

Garcia Plaza, E. and Nuñez, P.J. and Martin, A.R. and Sanz Lobera, Alfredo (2011). Control adaptativo del acabado superficial en la de procesos de torneado automatizados. In: "4th Manufacturing Engineering Society International Conference", 21/09/2011 - 23/09/2011, Cádiz, España. pp. 21-23.

Guemes Gordo, Jesus Alfredo and Pozo Morales, Angel Renato and Fernandez Lopez, Antonio and Fernandez Sanchez-Romate, Xoan Xose and Sánchez, María and Ureña, Alejandro (2020). Directional response of Randomly dispersed Carbon Nanotubes strain sensors. "Sensors", v. 20 (n. 10); pp. 2980-2894. ISSN 1424-8220. https://doi.org/10.3390/s20102980.

García del Cid, M.A. and Gonzalez Prolongo, Margarita and Salom Coll, Catalina and Sanchez-Cabezudo Tirado, Marta and Masegosa Fanego, Rosa María (2014). Influence of different organoclays on the curing, morphology, and dynamic mechanical properties of an epoxy adhesive. "Journal of Adhesion", v. 90 (n. 10); pp. 817-834. ISSN 0021-8464. https://doi.org/10.1080/00218464.2014.903656.

Gómez, A. and Sanz Lobera, Alfredo and Salguero, J. and Rubio, E. and Marcos, M. (2011). Influence of the Lubrication Conditions on the Surface Finish of Turned Aeronautical Aluminium Alloys. A preliminary Study. In: "Proceedings of the 4th International Congress on Energy and Environment Engineering and Management (CIIEM)", 25/05/2011 - 27/05/2011, Merida. pp. 212-216.

García del Cid, A. and González Prolongo, Margarita and Masegosa Fanego, Rosa María and Arribas Arribas, Carmen and Salom Coll, Catalina (2011). Influence of the epoxy/amine stoichiometry on the thermomechanical properties of nanocomposites based on high Tg epoxy and organophilic clays.. In: "European Polymer Congress 2011", 26/06/2011 - 01/07/2011, Granada, España. p. 85.

Guzmán Solís, Eduardo and Ortega, Francisco and González Prolongo, Margarita and Starov, Victor M. and González Rubio, Ramón (2011). Influence of the molecular architecture on the secondary relaxations of Poly(styrene-co-methylmethacrylate) copolymers. "The European Physical Journal, E", v. 34 (n. 13); pp. 134-140. ISSN 1292-8941. https://doi.org/10.1039/C1CP21967G.

García Alonso, Jaime (2016). Monitorización de estructuras aeronáuticas mediante técnicas de inteligencia artificial. Thesis (Doctoral), E.T.S.I. Aeronáuticos (UPM). https://doi.org/10.20868/UPM.thesis.39487.

García de Blas Villanueva, Francisco Javier (2016). Recubrimientos autolubricantes cuasicristalinos tipo composite depositados mediante proyección térmica para aplicaciones espaciales y de alta temperatura. Thesis (Doctoral), E.T.S.I. Aeronáuticos (UPM). https://doi.org/10.20868/UPM.thesis.39533.

M

MacDowell, Luis G. and Benet, Jorge and Katcho, Nebil A. and García Palanco, José María (2014). Disjoining pressure and the film-height-dependent surface tension of thin liquid films: New insight from capillary wave fluctuations. "Advances in Colloid and Interface Science", v. 206 ; pp. 150-171. ISSN 0001-8686. https://doi.org/10.1016/j.cis.2013.11.003.

O

Olarrea Busto, Jose and Lapuerta González, María Victoria and Sanz Lobera, Alfredo (2011). Estudio sobre la valoracion de alumnos de ingenieria acerca de distintos metodos de evaluacion. In: "8º Simposium Iberoamericano en Educacion, Cibernetica e Informatica: SIECI 2011", 19/07/2011 - 22/07/2011, Orlando, Florida, EEUU. pp. 1-6.

P

Ponce González, Mónico (2012). Visión por computador para UAS. Proyecto Fin de Carrera / Trabajo Fin de Grado, E.T.S.I. Aeronáuticos (UPM).

S

Sanz Lobera, Alfredo and Guimerans, M. and Gonzalez, I. and Pérez, J. (2011). Comparative Analysis of Tolerances Allocation in Mechanical Assemblies based on Cost-tolerance Curves. In: "4th Manufacturing Engineering Society International Conference", 21/09/2011 - 23/09/2011, Cádiz, España. p. 8.

Sanz Lobera, Alfredo and Villeta, M. and Sebastian, Miguel Angel (2011). Considerations in Determining the Cost of Measurement Uncertainty Associated with Dimensional Tolerances Verification. In: "4th Manufacturing Engineering Society International Conference", 21/09/2011 - 23/09/2011, Cádiz, España. p. 8.

Sanz Lobera, Alfredo and Olarrea Busto, Jose and Lapuerta González, María Victoria (2011). Considerations on the success rate in aeronautical engineering studies in Spain. In: "Research in Engineering Education Symposium 2011 (REES 2011)", 04/10/2011 - 07/10/2011, Madrid, España. pp. 678-685.

Sierra Pérez, Julian and Güemes Gordo, Jesús Alfredo and Mujica, Luis Eduardo (2013). Damage detection by using FBGs and strain field pattern recognition techniques. "Smart Materials And Structures", v. 22 (n. 2); pp. 25011-25021. ISSN 0964-1726. https://doi.org/10.1088/0964-1726/22/2/025011.

Sierra Pérez, Julian and Güemes Gordo, Jesús Alfredo (2011). Detección de daño en materiales compuestos mediante fibra óptica. In: "Actas del IX congreso nacional de materiales compuestos", 05/07/2011 - 08/07/2011, Girona. pp. 1-6.

Sanz Lobera, Alfredo and Fernández, R. and Pindado Carrion, Santiago and Nuñez, P.J. (2011). Estudio de la influencia del sistema de referencia en la evaluación de parámetros de acabado superficial. In: "4th Manufacturing Engineering Society International Conference", 21/09/2011 - 23/09/2011, Cádiz, España. p. 8.

Sanz Lobera, Alfredo (2011). Imparticion de Practicas de Laboratorio en Escuelas Tecnicas con Alto Numero de Alumnos. In: "8º Simposium Iberoamericano en Educacion, Cibernetica e Informatica: SIECI 2011", 19/07/2011 - 22/07/2011, Orlando, Florida, EEUU. p. 6.

Sanz Lobera, Alfredo and Gonzalez Roig, Alfredo and Gonzalez Requena, Ignacio (2011). Methodology for automated generation of multiple choice questions in self assessment. In: "Research in Engineering Education Symposium 2011 (REES 2011)", 04/10/2011 - 07/10/2011, Madrid, España. pp. 61-69.

Sanz Lobera, Alfredo and Arenas Reina, José Manuel and Sebastian, Miguel Angel (2011). Modelo de estimación de costes para tolerancias de diseño en la ingeniería de los procesos de producción. In: "XV Congreso Internacional de Ingeniería de Proyectos", 06/07/2011 - 08/07/2011, Huesca, España. p. 14.

Sierra Pérez, Julian and Güemes Gordo, Jesús Alfredo and Gomez, M. (2013). Sensibilidad de las variaciones en el campo de deformaciones en función de la aparición de daños en palas de aerogeneradores fabricadas en materiales compuestos. In: "MAT COMP13. X Congreso Nacional de Materiales Compuestos", 02/07/2013 - 05/07/2013, Algeciras. pp. 589-594.

Sierra Pérez, Julian (2014). Smart aeronautical structures: development and experimental validation of a structural health monitoring system for damage detection. Thesis (Doctoral), E.T.S.I. Aeronáuticos (UPM). https://doi.org/10.20868/UPM.thesis.30438.

Sanz Lobera, Alfredo and Fernández, R. and Pindado Carrion, Santiago and Núñez, P. (2011). Study of the Influence of Reference System in Surface Finishing Parameters Evaluation.. In: "4th Manufacturing Engineering Society International Conference, MESIC 2011", 21/09/2011 - 23/09/2011, Cádiz, España.

Salom Coll, Catalina and Calvo del Valle, Silvia and Gonzalez Prolongo, Margarita and Masegosa Fanego, Rosa María (2014). Unsaturated polyester-poly(epsilon-caprolactone) hybrid nanocomposites: Thermal-mechanical properties. "Polymer composites", v. 35 (n. 5); pp. 827-838. ISSN 0272-8397. https://doi.org/10.1002/pc.22726.

Sanz Lobera, Alfredo and Gonzalez Requena, Ignacio and Castejon Rosauro, Agustin and Casado Corpas, José (2011). Using Virtual Reality in the teaching of manufacturing processes with material removal in CNC Machine-Tools. "Materials Science Forum", v. 692 ; pp. 112-119. ISSN 0255-5476.

T

Tarín Remohí, Pascual (1973). Transformaciones estructurales de los aceros racionales para alta resistencia. Thesis (Doctoral), E.T.S.I. Aeronáuticos (UPM).

Tarín Remohí, Pascual and Alonso, I. and García Simón, Antonio and Badía Pérez, José María and Martín Piris, Nuria (2008). Characterization of the Alpha-Beta and Martensitic Transformations en the Ti-6Al-2Sn-4Zr-6Mo Alloy. "Materials Science & Engineering. A, Structural Materials", v. 481-48 ; pp. 559-561. ISSN 0921-5093. https://doi.org/10.1016/j.mseo.2006.12.193.

V

Villeta, M. and Rubio, E.M. and Sanz Lobera, Alfredo and Sevilla, L. (2011). An Alternative Method to Achieve Metrological Confirmation in Measurement Processes. In: "4th Manufacturing Engineering Society International Conference", 21/09/2011 - 23/09/2011, Cádiz, España. p. 8.

  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM