Browse by Institution

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Name | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 363.

A

Ashouri Vajari, Danial and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier and Legarth, Brian Nyvang (2014). A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites. "Composites Science and Technology", v. 97 ; pp. 46-54. ISSN 0266-3538. https://doi.org/10.1016/j.compscitech.2014.04.004.

Atienza Riera, José Miguel and Elices Calafat, Manuel (2008). Behavior of prestressing steels after fire. In: "17th Congress of IABSE : creating and renewing urban structures", 17/09/2008-19/09/2008, Chicago, EEUU. ISBN 978-3-85748-118-5.

Atienza Riera, José Miguel and Elices Calafat, Manuel (2008). Comportamiento de las armaduras activas después de un fuego. In: "IV Congreso de Asociación científico-técnica del hormigón estructural (ACHE)", 24/11/2008-27/11/2008, Valencia, España. ISBN 978-84-89670-62-4.

Aguirre Cebrian, Maria Vega (2014). Comportamiento mecánico de nuevas aleaciones de wolframio en función de la temperatura. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Andrés, P. de and Sánchez, Javier and Ridruejo Rodríguez, Álvaro (2018). Cálculo por primeros principios del coeficiente de difusión del H en una red de Fe pura. "Anales de Mecánica de la Fractura", v. 35 ; pp. 634-639. ISSN 0213-3725.

Abreu Rodrigues, Maricely de and Iordachescu, Mihaela and Valiente Cancho, Andrés (2014). Effects of hydrogen assisted stress corrosion on damage tolerance of a high-strength duplex stainless steel wire for prestressing concrete. "Construction and Building Materials", v. 66 ; pp. 38-44. ISSN 0950-0618. https://doi.org/10.1016/j.conbuildmat.2014.05.069.

Astiz Suárez, Miguel Angel (1976). Estudio de la estabilidad de una fisura superficial en un alambre de acero de alta resistencia. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Alhazmi, Waleed (2017). Experimental and numerical study of cementitious composites subjected to high strain rate tensile loadings. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.49101.

Al Hazmi, Waleed H. and Cendón Franco, David Ángel and Gálvez Díaz-Rubio, Francisco and Ruiz, Gonzalo and Zhang, Xiaoxin and Gómez del Pulgar, Celia (2015). Experimental response of high-strength fiber-reinforced concrete slabs to blast loading. In: "XXXII Encuentro del Grupo Español de Fractura", 27-29 de abril de 2015, Zamora. pp. 190-195.

Atienza Riera, José Miguel and Elices Calafat, Manuel (2010). Fire-induced damage in presstressing steels. In: "80th Annual Convention Wire & Cable Technical Symposium", 01/05/2010 - 01/05/2010, Wisconsin, EEUU.

Alonso, J. and Ridruejo Rodríguez, Álvaro and Sánchez, J. (2017). Fragilización por hidrógeno: estudio de la influencia de la energía de las trampas mediante simulación de Monte Carlo. In: "XXXIV Encuentro del Grupo Español de la Fractura", 29-31 Marzo 2017, Santander. pp. 477-484.

Atienza Riera, José Miguel and Ruiz Hervías, Jesús and Elices Calafat, Manuel (2008). Improved cold-drawn eutectoid steel wires based on residual stress measurement and simulation: Part 2. optimization of mechanical properties. In: "78th Annual Convention - Wire Expo 2008", 07/06/2008-10/06/2008, Pittsburgh, EEUU. ISBN 0277-4275.

Atienza Riera, José Miguel and Rojo Pérez, Francisco Javier and Claes, Els and García Herrera, Claudio Moisés and Burgos, Raul and García Montero, Carlos and Guinea Tortuero, Gustavo V. (2010). Influencia de la edad y los aneurismas en la rotura de la pared aorta ascendente. In: "XXVII Encuentro del Grupo Español de Fractura", 25/03/2010 - 27/03/2010, Oporto, Portugal.

Anero Rodríguez, Gonzalo Antonio (2017). Materiales de construcción aislantes con recursos y procesos locales, para países en vías de desarrollo.. Proyecto Fin de Carrera / Trabajo Fin de Grado, E.T.S.I. Caminos, Canales y Puertos (UPM), Madrid.

Atienza Riera, José Miguel and Ruiz Hervías, Jesús and Elices Calafat, Manuel (2008). Medida de tensiones residuales para el control y mejora de la durabilidad de los alambres de pretensado. In: "IV Congreso de Asociación científico-técnica del hormigón estructural (ACHE)", 24/11/2008-27/11/2008, Valencia, España. ISBN 978-84-89670-62-4.

Andrade Perdrix, María del Carmen and Martínez Sierra, Isabel (2010). Non contacting corrosion method applied to the steel corrosion rate determination in different solutions and reinforced concrete specimens.. In: "NACE 2010", 01/03/2010 - 01/03/2010, San Antonio, Texas, EEUU. pp. 1-2.

Atienza Riera, José Miguel (2010). Response of human coronary arteries to different mechanical conditions. In: "Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2010", 31/08/2010 - 04/09/2010, Buenos Aires, Argentina. ISBN 978-1-4244-4123-5.

Abreu Rodrigues, Maricely de and Valiente Cancho, Andrés and Iordachescu, Mihaela (2013). Sensibilidad a las entallas del acero inoxidable duplex fuertemente trefilado.. In: "XXX Encuentro del Grupo Español de Fractura.", 13/03/2013 - 15/03/2013, Toledo. España.

Atienza Riera, José Miguel (2001). Tensiones residuales en alambres de acero trefilados. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.139.

Atienza Riera, José Miguel and Ruiz Hervías, Jesús and Elices Calafat, Manuel (2012). The role of residual stresses in the performance and durability of prestressing steel wires. "Experimental Mechanics", v. 52 (n. 7); pp. 881-893. ISSN 0014-4851.

Abreu Rodrigues, Maricely de (2021). Tolerancia al daño del acero inoxidable dúplex trefilado para su uso como acero de pretensar bajo condiciones de servicio singulares. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.67277.

B

Berto, F. and Cendón Franco, David Ángel and Lazzarin, P. and Elices Calafat, Manuel (2013). Fracture behaviour of notched round bars made of PMMA subjected to torsion at -60 °C. "Engineering fracture mechanics", v. 102 ; pp. 271-287. ISSN 0013-7944. https://doi.org/10.1016/j.engfracmech.2013.02.011.

Boehlert, Carl and Chen, Zhe and Chakkedath, A. and Gutiérrez Urrutia, Iván and Llorca Martinez, Francisco Javier and Bohlen, J. and Yi, S. and Letzig, D. and Pérez Prado, María Teresa (2013). In situ analysis of the tensile deformation mechanisms in extruded Mg–1Mn–1Nd (wt%). "Philosophical Magazine", v. 93 (n. 6); pp. 598-617. ISSN 1478-6435. https://doi.org/10.1080/14786435.2012.725954.

Bardella, Lorenzo and Segurado Escudero, Javier and Panteghini, Andrea and Llorca Martinez, Francisco Javier (2013). Latent hardening size effect in small-scale plasticity. "Modelling and simulation in materials science and engineering", v. 21 (n. 5); pp. 1-28. ISSN 0965-0393. https://doi.org/10.1088/0965-0393/21/5/055009.

Bardella, Lorenzo and Segurado Escudero, Javier and Panteghini, Andrea and Llorca Martinez, Francisco Javier (2013). Latent hardening size effect in small-scale plasticity. In: "XII International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XII)", 03/09/2013-05/09/2013, Barcelona (España).

Bernal, Aurora and Pérez, Laura M. and Lucas, Beatriz de and San Martín, Nuria and Kadow-Romacker, Anke and Plaza Baonza, Gustavo Ramón and Raum, Kay and Gálvez, Beatriz G. (2015). Low-Intensity Pulsed Ultrasound Improves the Functional Properties of Cardiac Mesoangioblasts. "Stem Cell Reviews and Reports", v. 11 (n. 6); pp. 852-865. ISSN 1550-8943. https://doi.org/10.1007/s12015-015-9608-6.

Bellón Lara, Bárbara (2020). Multiscale experimental characterization and modelling validation of microstructure and mechanical properties of engineering alloys. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.64478.

Boehlert, Carl and Chen, Zhe and Gutiérrez Urrutia, Iván and Llorca Martinez, Francisco Javier and Pérez Prado, María Teresa (2013). On the Controversy About the Presence of Grain Boundary Sliding in Mg AZ31. "Materials Science Forum", v. 735 ; pp. 22-25. ISSN 0255-5476. https://doi.org/10.4028/www.scientific.net/MSF.735.22.

Bourges, Jean Yves and Rojo Pérez, Francisco Javier and Garcia Paez, J.M. and Atienza Riera, José Miguel and Alvarez, L. and Guinea Tortuero, Gustavo V. (2011). Relationship between fibre orientation and tensile strength of natural collagen membranes for heart valve leaflets. In: "XXVIII Encuentro del Grupo Español de Fractura", 06/04/2011 - 08/04/2011, Gijón, España.

Blackledge, Todd A and Pérez Rigueiro, José and Plaza Baonza, Gustavo Ramón and Perea Abarca, Gracia Belén and Navarro, Andrés and Guinea Tortuero, Gustavo V. and Elices Calafat, Manuel (2012). Sequential origin in the high performance properties of spider dragline silk. "Scientific Reports", v. 2 (n. 782); pp. 1-5. ISSN 2045-2322. https://doi.org/10.1038/srep00782.

Bo, Qu (2018). Temperature effect on performance of Portland cement versus advanced hybrid cements and alkali-Fly ash cement. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.49698.

C

Cendón Franco, David Ángel and Gálvez Díaz-Rubio, Francisco and Erice Echávarri, Borja and Enfedaque Díaz, Alejandro and Sanchez Galvez, Vicente (2010). A new finite element based methodology for the analysis of tangling in jet engine turbines. In: "Fourth International Conference on Engineering Failure Analysis, ICEFA", 04/07/2010 - 07/07/2010, Cambridge, UK.

Cendón Franco, David Ángel and Elices Calafat, Manuel (2015). Analysis of U-notched grey cast iron specimens subjected to mode I loading through the Cohesive Zone Model. In: "4th International Conference of Engineering Against Failure (ICEAF IV)", 24/06/2015 – 26/06/2015, Skiathos, Grecia. pp. 1-8.

Claes, Els and García Herrera, Claudio Moisés and Guinea Tortuero, Gustavo V. and Bernal Marcos, Jose Manuel and Revuelta Soba, Jose Manuel and Elices Calafat, Manuel (2008). Análisis mecánico de un bypass coronario término-terminal. "Anales de Mecánica de la Fractura", v. 25 (n. 2); pp. 11-16. ISSN 0213-3725.

Canal Casado, Luis Pablo and González Martínez, Carlos Daniel and Molina Aldareguía, Jon M. and Segurado Escudero, Javier and Llorca Martinez, Francisco Javier (2012). Application of digital image correlation at the microscale in fiber-reinforced composites. "Composites Part A: Applied Science and Manufacturing", v. 43 (n. 10); pp. 1630-1638. ISSN 1359-835X.

Calvo Aguilar, Daniel (2013). Caracterización mecánica de injertos de aorta ascendente de Dacron®. Thesis (Master thesis), E.T.S.I. Caminos, Canales y Puertos (UPM).

Claes, Els and García Herrera, Claudio Moisés and Guinea Tortuero, Gustavo V. and Rojo Pérez, Francisco Javier and Atienza Riera, José Miguel and Bernal Marcos, Jose Manuel and Revuelta Soba, Jose Manuel and Elices Calafat, Manuel (2008). Caracterización mecánica de los vasos utilizados en un Bypass Coronario.. In: "XXV Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB)", 15/10/2008-17/10/2008, Valladolid, España. ISBN 978-84-691-3640-9.

Chen, Yi and Li, Jinshan and Tang, Bin and Kou, Hongchao and Segurado Escudero, Javier and Cui, Yuwen (2014). Computational study of atomic mobility for bcc phase in Ti-Al-Fe system. "Calphad", v. 46 ; pp. 205-212. ISSN 0364-5916. https://doi.org/10.1016/j.calphad.2014.05.004.

Chang, Chao (2016). Determining the elastic-plastic properties of metallic materials through instrumented indentation. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.39787.

Cardeña Díaz, Andrea (2020). Estudio de la aleación metaestable Fe-5Mg (%m) obtenida por molienda de alta energía.. Proyecto Fin de Carrera / Trabajo Fin de Grado, E.T.S.I. Caminos, Canales y Puertos (UPM), Madrid, España.

Cendón Franco, David Ángel and Elices Calafat, Manuel (2015). Estudio del efecto de entalla en probetas de fundición gris sometidas a flexión. In: "XXXII Encuentro del Grupo Español de Fractura", 27-29 de abril de 2015, Zamora. pp. 117-122.

Claes, Els (2010). Estudio mecánico de las arterias coronarias humanas y sus sustitutos vasculares. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Canal Casado, Luis Pablo (2011). Experimental and computational micromechanical study of fiber-reinforced polymers. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Cendón Franco, David Ángel and Morales Alonso, Gustavo and Gálvez Díaz-Rubio, Francisco and Oña, M. and Sanchez Galvez, Vicente (2013). Experimental and numerical analysis of concrete Slabs subjected to Blast. In: "64th meeting of the Aeroballistic Range Association (ARA)", 06/10/2013 - 11/10/2013, Destin, Florida (USA).

Craiem, Damian and Rojo Pérez, Francisco Javier and Atienza Riera, José Miguel and Guinea Tortuero, Gustavo V. and Armentano, Ricardo L. (2008). Fractional calculus applied to model arterial viscoelasticity. "Latin American Applied Research", v. 38 (n. 2); pp. 141-145. ISSN 0327-0793.

Craiem, Damian and Rojo Pérez, Francisco Javier and Atienza Riera, José Miguel and Armentano, Ricardo L. and Guinea Tortuero, Gustavo V. (2008). Fractional-order viscoelasticity applied to describe uniaxial stress relaxation of human arteries.. "Physics in Medicine and Biology", v. 53 (n. 17); pp. 4543-4554. ISSN 0031-9155. https://doi.org/10.1088/0031-9155/53/17/006.

Cendón Franco, David Ángel and Atienza Riera, José Miguel and Elices Calafat, Manuel (2010). Influencia de diferentes variables del Ensayo de Tracción en la Deformación de Rotura.. In: "XXVII Encuentro del Grupo Español de Fractura", 17/05/2010 - 19/05/2010, Oporto, Portugal.

Canal Casado, Luis Pablo and González Martínez, Carlos Daniel and Segurado Escudero, Javier and Llorca Martinez, Francisco Javier (2012). Intraply fracture of fiber-reinforced composites: microscopic mechanisms and modeling. "Composites Science And Technology", v. 72 (n. 11); pp. 1223-1232. ISSN 0266-3538. https://doi.org/10.1016/j.compscitech.2012.04.008.

Calvo, A. and Ordás, N. and Iturriza, I. and Pastor Caño, Jose Ignacio and Tejado Garrido, Elena María and Palacios García, Teresa and García-Rosales, C. (2016). Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes. "Physica Scripta", v. 2016 (n. T167); pp. 1-6. ISSN 0031-8949. https://doi.org/10.1088/0031-8949/T167/1/014041.

Canal Casado, Luis Pablo and Molina Aldareguía, Jon M. and González Martínez, Carlos Daniel and Segurado Escudero, Javier and Llorca Martinez, Francisco Javier (2010). Mecanismos de Deformación en laminados de matriz polimérica correlación digital de imágenes y micromecánica computacional. In: "XXVII Encuentro del Grupo Español de Fractura", 17/05/2010 - 19/05/2010, Oporto, Portugal.

Cenis, José L. and Madurga, Rodrigo and Aznar-Cervantes, Salvador D. and Lozano-Pérez, A. Abel and Marí-Buyé, Núria and Meseguer-Olmo, Luis and Plaza Baonza, Gustavo Ramón and Guinea Tortuero, Gustavo V. and Elices Calafat, Manuel and Pozo Guerrero, Francisco del and Pérez Rigueiro, José (2015). Mechanical behaviour and formation process of silkworm silk gut. "Soft Matter", v. 11 ; pp. 8981-8991. ISSN 1744-6848. https://doi.org/10.1039/c5sm01877c.

Claes, Els and Atienza Riera, José Miguel and Guinea Tortuero, Gustavo V. and Rojo Pérez, Francisco Javier and Bernal Marcos, Jose Manuel and Revuelta Soba, Jose Manuel and Elices Calafat, Manuel (2010). Mechanical properties of human coronary arteries. In: "2010 Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC)", 31/08/2010 - 04/09/2010, Buenos Aires, Argentina. ISBN 978-1-4244-4123-5.

Chang, Hyung-jun and Segurado Escudero, Javier and Rodríguez de la Fuente, O. and Pabón, B. M. and Llorca Martinez, Francisco Javier (2013). Molecular dynamics modeling and simulation of void growth in two dimensions. "Modelling and simulation in materials science and engineering", v. 21 (n. 7); pp. 1-17. ISSN 0965-0393. https://doi.org/10.1088/0965-0393/21/7/075010.

Cerecedo, C. and Valcarcel, V. and Solis, A. and Pastor Caño, Jose Ignacio and Molina, M. and Prieto, R. and Louis, E. and Narciso, J. (2010). Neoker Single Crystal Alumina Fibers as reinforcement in Al-based MMC: first steps. In: "Modern ceramic materials and their application – 2010", 13/05/2010 - 14/05/2010, Novosibirssk, Rusia.

Cendón Franco, David Ángel and Erice Echávarri, Borja and Gálvez Díaz-Rubio, Francisco and Sanchez Galvez, Vicente (2012). Numerical simulation of tangling in jet engine turbines. "International Journal of Turbo and Jet-Engines", v. 29 (n. 4); pp. 269-282. ISSN 0334-0082. https://doi.org/10.1515/tjj-2012-0018.

Calvo, A. and García-Rosales, C. and Ordás, N. and Iturriza, I. and Schlueter, K. and Koch, F. and Pintsuk, G. and Tejado Garrido, Elena María and Pastor Caño, Jose Ignacio (2016). Self-passivating W-Cr-Y alloys: characterization and testing. In: "29th Symposium on Fusion Technology (SOFT 2016)", 05/09/2016-09/09/2016, Praga, República Checa. pp. 1-4.

Cendón Franco, David Ángel and Berto, F. and Lazzarin, P. and Elices Calafat, Manuel (2013). The Cohesive Crack Model Applied To Notched PMMA Specimens Obeying a Non Linear Behaviour Under Torsion Loading. In: "Proceedings of the 12th International Conference on Fracture and Damage Mechanics", 17/09/2013 - 19/09/2013, Cerdeña. Italia. pp..

Caballero Molano, Luis and Atienza Riera, José Miguel and Elices Calafat, Manuel (2011). Thermo-Mechanical Treatment Effects on Stress Relaxation and Hydrogen Embrittlement of Cold-Drawn Eutectoid Steels. "Metals And Materials International", v. 17 (n. 6); pp. 899-910. ISSN 1598-9623. https://doi.org/10.1007/s12540-011-6006-8.

Chen, Nana (2022). Tuning the mechanical properties of metastable beta titanium alloys through the control of microstructure and deformation mechanisms. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.70158.

Castro Arias, Jaime (2020). X-Ray Tomographic Investigation of Resin Flow in Liquid Moulding of Composite Materials. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.69350.

D

Daza García, Rafael (2014). Desarrollo de un procedimiento para la observación y caracterización mecánica de células sobre sustratos opacos mediante microscopía de fuerzas atómicas : aplicación al estudio de linfocitos. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Dudamell, N.V. and Ulacia, I. and Galvez Diaz-Rubio, Francisco and Yi, S. and Bohlen, J. and Letzig, D. and Hurtado, I. and Pérez Prado, María Teresa (2012). Influence of texture on the recrystallization mechanisms in an AZ31 Mg sheet alloy at dynamic rates. "Materials Science and Engineering: A", v. 532 ; pp. 528-535. ISSN 0921-5093. https://doi.org/10.1016/j.msea.2011.11.018.

De Juan Mangas, Teresa and Tejado Garrido, Elena María and Ivekovic, Aljaz and Novak, Sasa and Pastor Caño, Jose Ignacio (2013). Microstructure and mechanical properties at high temperature of SiC-matrix by electrophoretic deposition and polymer infiltration and pyrolysis process. In: "Euromat 2013. European Congress and Exhibition on Advanced Materials and Processes.", 08/09/2013 - 13/09/2013, Sevilla. España.

Daza García, Rafael and Cruces, Julia and Arroyo-Hernández, María and Marí-Buyé, Núria and Fernández de la Fuente, Mónica and Plaza Baonza, Gustavo Ramón and Elices Calafat, Manuel and Pérez Rigueiro, José and Guinea Tortuero, Gustavo V. (2015). Topographical and mechanical characterization of living eukaryotic cells on opaque substrates: development of a general procedure and its application to the study of non-adherent lymphocytes. "Physical Biology", v. 12 (n. 2); pp. 1-12. ISSN 1478-3967. https://doi.org/10.1088/1478-3975/12/2/026005.

Dudamell, N.V. and Ulacia, I. and Gálvez Díaz-Rubio, Francisco and Yi, S. and Bohlen, J. and Letzig, D. and Hurtado, I. and Pérez Prado, María Teresa (2011). Twinning and grain subdivision during dynamic deformation of a Mg AZ31 sheet alloy at room temperature. "Acta Materialia", v. 59 (n. 18); pp. 6949-6962. ISSN 1359-6454. https://doi.org/10.1016/j.actamat.2011.07.047.

E

Erice Echávarri, Borja and Gálvez Díaz-Rubio, Francisco (2014). A coupled elastoplastic-damage constitutive model with Lode angle dependent failure criterion. "International Journal of Solids and Structures", v. 51 (n. 1); pp. 93-110. ISSN 0020-7683. https://doi.org/10.1016/j.ijsolstr.2013.09.015.

Erice Echávarri, Borja and Gálvez Díaz-Rubio, Francisco and Cendón Franco, David Ángel and Sanchez Galvez, Vicente and Borvik, Tore (2011). An Experimental and Numerical Study of Ballistic Impacts on a Turbine Casing Material at Varying Temperatures. In: "26th International Symposium on Ballistics", 12/09/2011 - 16/09/2011, Miami, FL, USA.

Erice Echávarri, Borja and Pérez Martín, Maria Jesus and Gálvez Díaz-Rubio, Francisco (2014). An experimental and numerical study of ductile failure under quasi-static and impact loadings of Inconel 718 nickel-base superalloy. "International Journal of Impact Engineering", v. 69 ; pp. 11-24. ISSN 0734-743X. https://doi.org/10.1016/j.ijimpeng.2014.02.007.

Esteban Manzanares, Gustavo (2019). Atomistic modeling of the strengthening mechanisms in FCC and HCP metals. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.57251.

Esteban Manzanares, Gustavo and Ma, Anxin and Papadimitriou, Ioannis and Martínez Sáez, Enrique and Llorca Martinez, Francisco Javier (2019). Basal Dislocation/Precipitate Interactions in Mg-Al Alloys: an Atomistic Investigation. "Modelling and Simulation in Materials Science and Engineering", v. 27 (n. 7); pp.. ISSN 1361-651X. https://doi.org/10.1088/1361-651X/ab2de0.

Elices Calafat, Manuel and Guinea Tortuero, Gustavo V. and Plaza Baonza, Gustavo Ramón and Karatzas, C. and Riekel, Christian and Agulló-Rueda, Fernando and Daza, R. and Pérez Rigueiro, José (2011). Bioinspired fibers follow the track of natural spider silk. "Macromolecules", v. 44 (n. 5); pp. 1166-1176. ISSN 0024-9297. https://doi.org/10.1021/ma102291m.

Eres-Castellanos, Adriana (2018). Effect of ausforming on the bainitic transformation in medium carbon steels. Thesis (Master thesis), E.T.S.I. Caminos, Canales y Puertos (UPM).

Erice Echávarri, Borja and Pérez Martín, Maria Jesus and Cendón Franco, David Ángel and Gálvez Díaz-Rubio, Francisco (2012). Effect of the temperature, strain rate and microstructure on flow and fracture characteristics of Ti-45Al-2Nb-2Mn+0.8vol.% TiB2 XD alloy. "The European Physical Journal Special Topics", v. 206 (n. 1); pp. 3-14. ISSN 1951-6355.

Enfedaque Díaz, Alejandro and Sanchez Galvez, Vicente (2008). Estudio de la superficie de fractura de probetas de GRC ensayadas a tracción. "Anales de Mecánica de la Fractura", v. 25 (n. 11); pp. 67-72. ISSN 0213-3725.

Elices Calafat, Manuel and Valiente Cancho, Andrés and Caballero Molano, Luis and Iordachescu, Mihaela and Fullea García, José and Sánchez Montero, J. and López Serrano, V. (2012). Failure analysis of prestressed anchor bars. "Engineering Failure Analysis", v. 24 ; pp. 57-66. ISSN 1350-6307. https://doi.org/10.1016/j.engfailanal.2012.03.007.

Enfedaque Díaz, Alejandro and Cendón Franco, David Ángel and Gálvez Díaz-Rubio, Francisco and Sanchez Galvez, Vicente (2011). Failure and impact behavior of facade panels made of glass fiber reinforced cement(GRC). "Engineering Failure Analysis", v. 18 (n. 7); pp. 1652-1663. ISSN 1350-6307. https://doi.org/10.1016/j.engfailanal.2011.01.004.

Erice Echávarri, Borja and Gálvez Díaz-Rubio, Francisco and Cendón Franco, David Ángel and Sanchez Galvez, Vicente (2012). Flow and fracture behaviour of FV535 steel at different triaxialities, strain rates and temperatures. "Engineering Fracture Mechanics", v. 79 ; pp. 1-17. ISSN 0013-7944. https://doi.org/10.1016/j.engfracmech.2011.08.023.

Erice Echávarri, Borja (2012). Flow and fracture behaviour of high performance alloys. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Erice Echávarri, Borja and Gálvez Díaz-Rubio, Francisco and Perez, M.J. and Cendón Franco, David Ángel and Sanchez Galvez, Vicente (2011). Importancia del ablandamiento térmico en simulaciones de impactos en placas de acero a altas temperaturas. In: "XXVIII Encuentro del Grupo Español de Fractura", 06/04/2011 - 08/04/2011, Gijón, España.

Erice Echávarri, Borja and Gálvez Díaz-Rubio, Francisco and Cendón Franco, David Ángel and Sanchez Galvez, Vicente (2011). Importancia del ablandamiento térmico en simulaciones de impactos en placas de acero a altas temperaturas. "Anales de Mecánica de la Fractura", v. 2 (n. 28); pp. 433-438.

Elices Calafat, Manuel and Suárez Guerra, Fernando and Gálvez Ruiz, Jaime and Cendón Franco, David Ángel and Atienza Riera, José Miguel (2011). Influence of coiling in stress relaxation of prestressing steel wires. In: "fib Symposium 2011 in Prague: Concrete engineering for excellence and efficiency", 08/06/2011 - 10/06/2011, Praga, República Checa.

Elices Calafat, Manuel and Suárez Guerra, Fernando and Gálvez Ruiz, Jaime and Cendón Franco, David Ángel and Atienza Riera, José Miguel (2011). Influence of coiling on the stress relaxation of prestressing steel wires. "Structural Concrete", v. 12 (n. 2); pp. 120-125. ISSN 1464-4177. https://doi.org/10.1002/suco.201000019.

Elaziz, Adel Mohamed Fathy Abd (1996). Inyección de grandes grietas con resina epoxi. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Erice Echávarri, Borja and Gálvez Díaz-Rubio, Francisco and Cendón Franco, David Ángel and Sanchez Galvez, Vicente (2010). Mechanical Behavior of FV535 Steel against Ballistic Impact at High temperatures. In: "IBM POWER Systems and System Storage Symposium 2010", 17/05/2010 - 21/05/2010, Pekin, China.

Erice Echávarri, Borja and Pérez Martín, Maria Jesus and Cendón Franco, David Ángel and Gálvez Díaz-Rubio, Francisco (2012). Modelo de comportamiento plástico y rotura en aleaciones de solidificación direccional. In: "XXIX Encuentro del Grupo Español de Fractura", 21/03/2012 - 23/03/2012, Bilbao, España. pp. 399-406.

Elices Calafat, Manuel and Guinea Tortuero, Gustavo V. and Pérez Rigueiro, José and Plaza Baonza, Gustavo Ramón (2011). Polymeric fibers with tunable properties Lessons from spider silk. "Materials Science and Engineering: C", v. 31 (n. 6); pp. 1184-1188. ISSN 0928-4931. https://doi.org/10.1016/j.msec.2010.11.010.

Enfedaque Díaz, Alejandro (2008). Resistencia a impacto de morteros de cemento reforzados con fibra de vidrio (GRC). Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Ester, Francisco J. and Merino, R.I. and Pastor Caño, Jose Ignacio and Martin Sanz, Antonia and Llorca Martinez, Francisco Javier (2008). Surface modification of Al2O3–ZrO2(Y2O3) eutectic oxides by laser melting: processing and wear resistance. "Journal of the American Ceramic Society", v. 91 (n. 11); pp. 3552-3559. ISSN 1551-2916. https://doi.org/10.1111/j.1551-2916.2008.02728.x.

Elices Calafat, Manuel and Plaza Baonza, Gustavo Ramón and Pérez Rigueiro, José and Guinea Tortuero, Gustavo V. (2011). The hidden link between supercontraction and mechanical behavior of spider silks. "Journal of the mechanical behavior of biomedical materials", v. 4 (n. 5); pp. 658-669. ISSN 1751-6161. https://doi.org/10.1016/j.jmbbm.2010.09.008).

Elices Calafat, Manuel and Guinea Tortuero, Gustavo V. and Pérez Rigueiro, José and Plaza Baonza, Gustavo Ramón (2011). Usos médicos de la seda. "Investigacion y Ciencia" (n. 419); pp. 28-35. ISSN 0210-136X.

F

Frontán, Jaime and Zhang, Yuming and Dao, Ming and Lu, Jian and Gálvez Díaz-Rubio, Francisco and Jérusalem, Antoine (2012). Ballistic performance of nanocrystalline and nanotwinned ultrafine crystal steel. "Acta Materialia", v. 60 (n. 3); pp. 1353-1367. ISSN 1359-6454. https://doi.org/10.1016/j.actamat.2011.11.029.

Franco Benito, Víctor (2011). Caracterización y modelado de estructuras del patrimonio histórico. Thesis (Master thesis), E.T.S.I. Caminos, Canales y Puertos (UPM).

Fernández Robles, José Jaime (2015). Comportamiento frente a corrosión bajo tensión en ambiente marino de armaduras de acero inoxidable dúplex. Thesis (Master thesis), E.T.S.I. Caminos, Canales y Puertos (UPM).

Fu, Can (2021). Design and study of multifunctional fabrics. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.69340.

Fraile Griborio, Francisco J. (2010). Diseño, cálculo y comprobación de unión soldada en viga de puente grúa de alma doble . Thesis (Master thesis), E.T.S.I. Caminos, Canales y Puertos (UPM).

Fernandez Toribio, Juan Carlos (2018). Microstructure-properties relations for hierarchically structured CNT fibres. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.53789.

Feng, Wenliang (2021). Na-ion Hybrid Energy Storage Devices Based on Nanoengineered Electrodes. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.68573.

Fernandez Jimenez, Ana and Palomo, Angel and Pastor Caño, Jose Ignacio and Martin Sanz, Antonia (2008). New cementitious materials based on alkali-activated fly ash: performance at high temperatures. "Journal of the American Ceramic Society", v. 91 (n. 10); pp. 3308-3314. ISSN 1551-2916. https://doi.org/10.1111/j.1551-2916.2008.02625.x.

Fan, Kunyang (2016). Relationship between residual stresses and mechanical behavior in ceramic composites. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.39766.

Fan, Kunyang and Ruiz Hervías, Jesús and Gurauskis, J. and Baudin, C. (2017). Residual stress measurements of alumina-zirconia ceramics by time-of-flight neutron diffraction. In: "International Conference on Residual Stresses (ICRS-10)", 03/07/2016-07/07/2016, Sidney, Australia. ISBN 978-1-94529116-6. pp. 1-6. https://doi.org/10.21741/9781945291173-27.

Fernandez, P. and Garcia Cortes, I. and Gonzalez, M. and Gonzalez Arrabal, Raquel and Hernandez, T. and Ibarra, A. and Jimenez Rey, D. and Monge, M.A. and Pareja, R. and Pastor Caño, Jose Ignacio and Perlado Martín, José Manuel and Roman, R. (2010). Tecnologías de materiales con aplicaciones en fusión y su desarrollo en la instalación TechnoFusión. In: "XI Congreso Nacional de Materiales", 23/06/2010 - 25/06/2010, Zaragoza, España.

G

García Ayala, Esperanza Macarena (2021). Aqueous colloidal processing of W and WC-based composites, sintering and mechanical properties at high temperature. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.69337.

Gómez-Sellés Ortuño, José Luis de (2016). Atomistic modeling of Ge damage accumulation, amorphization and solid phase epitaxial regrowth. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.39102.

Gálvez Díaz-Rubio, Francisco and Atienza Riera, José Miguel and Elices Calafat, Manuel (2011). Behaviour of steel prestressing wires under extreme conditions of strain rate and temperature. "Structural Concrete", v. 12 (n. 4); pp. 255-261. ISSN 1751-7648. https://doi.org/10.1002/suco.201100030.

Gálvez Díaz-Rubio, Francisco and Erice Echávarri, Borja and Cendón Franco, David Ángel and Sanchez Galvez, Vicente (2011). Comportamiento mecánico a alta temperatura y alta velocidad de deformación de la superaleación de niquel MAR-M247DS. In: "XXVIII Encuentro del Grupo Español de Fractura", 06/04/2011 - 08/04/2011, Gijón, España.

González Bermúdez, Blanca (2021). Deformability of T cells as a mechanical biomarker of immunosenescence and development of techniques for the clinical application. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.69384.

García Carpintero, Alejandro Cecilio (2019). Development and validation of numerical modeling approaches for triaxially braided composites. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.56641.

González Martínez, Carlos Daniel (2000). Dos modelos micromécanicos de deformación con daño en materiales compuestos. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Gálvez Díaz-Rubio, Francisco and Erice Echávarri, Borja and Sanchez Galvez, Vicente (2011). Efecto de la temperatura, la velocidad de deformación y la microestructura en el comportamiento mecánico de intermetálicos gamma-TiAl. In: "XXVIII Encuentro del Grupo Español de Fractura", 06/04/2011 - 08/04/2011, Gijón, España.

Gunderov, D. V. and Polyakov, A. V. and Semenova, I. P. and Raab, G. I. and Churakova, A. A. and Gimaltdinova, E. I. and Sabirov, Ilchat and Segurado Escudero, Javier and Sitdikov, V. D. and Alexandrov, I. V. and Enikeev, N. A. and Valiev, R. Z. (2013). Evolution of microstructure, macrotexture and mechanical properties of commercially pure Ti during ECAP-conform processing and drawing. "Materials Science and Engineering: A. Structural Materials: Properties, Microstructure and Processing", v. 562 ; pp. 128-136. ISSN 0921-5093. https://doi.org/10.1016/j.msea.2012.11.007.

Gutiérrez-Solana Salcedo, Federico (1981). Fragilización por hidrógeno en tuberías de acero. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Guinea Tortuero, Gustavo V. and Atienza Riera, José Miguel and Fantidis, Panayotis and Rojo Pérez, Francisco Javier and Ortega Pozzi, Aranzazu and Torres Coronado, Monica and Gonzalez, Pablo and Elices, Margarita L. and Hayashi, Kozaburo and Elices Calafat, Manuel (2008). Increases of Corporal Temperature as a Risk Factor of Atherosclerotic Plaque Instability. "Annals of Biomedical Engineering", v. 36 (n. 1); pp. 66-76. ISSN 0090-6964. https://doi.org/10.1007/s10439-007-9397-4.

González Bermúdez, Blanca and Pastor Caño, Jose Ignacio (2013). International Materials Science Seminars: A Bridge between Two Continents. In: "Euromat 2013. European Congress and Exhibition on Advanced Materials and Processes.", 08/09/2013 - 13/09/2013, Sevilla. España.

García Herrera, Claudio Moisés and Atienza Riera, José Miguel and Rojo Pérez, Francisco Javier and Claes, Els and Guinea Tortuero, Gustavo V. and Celentano, Diego J. and García Montero, M. and Burgos, R.L. (2012). Mechanical behaviour and rupture of normal and pathological human ascending aortic wall. "Medical and Biological Engineering and Computing", v. 50 (n. 6); pp. 559-566. ISSN 0140-0118. https://doi.org/10.1007/s11517-012-0876-x.

García Herrera, Claudio Moisés and Celentano, Diego J. and Cruchaga, Marcela A. and Rojo Pérez, Francisco Javier and Atienza Riera, José Miguel and Guinea Tortuero, Gustavo V. and Goicolea Ruigómez, José María (2010). Mechanical characterization of the human thoracic descending aorta Experiments and modelling. "Computer Methods in Biomechanics and Biomedical Engineering" ; ISSN 1025-5842. https://doi.org/10.1080/10255842.2010.520704.

Guinea Tortuero, Gustavo V. (1990). Medida de la energía de fractura del hormigón. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Gálvez Díaz-Rubio, Francisco and Cendón Franco, David Ángel and Enfedaque Díaz, Alejandro and Sanchez Galvez, Vicente (2008). Medida de la tenacidad de fractura dinámica de un acero de blindaje de alta resistencia. In: "XXV Encuentro del Grupo Español de Fractura", 05/03/2008-07/03/2008, Sigüenza, Guadalajara. ISBN 0213-3725.

Garcia, Noemí and Cendón Franco, David Ángel and Gálvez Díaz-Rubio, Francisco and Sanchez Galvez, Vicente (2010). Metodología para la Obtención de la Tenacidad de la fractura dinámica. Aplicación a un acero estructural. In: "XXVII Encuentro del Grupo Español de Fractura. Anales de Mecánica de la Fractura", 17/05/2010 - 19/05/2010, Oporto, Portugal.

Gómez-Jiménez, M. and Palacios García, Teresa and Muñoz, A. and Pastor Caño, Jose Ignacio (2013). Microstructure and mechanical properties degradation at high temperature of tungsten alloys processed by forging. In: "Euromat 2013. European Congress and Exhibition on Advanced Materials and Processes", 08/09/2013 - 13/09/2013, Sevilla. España.

Gutierrez Lopez, J. and Rodriguez Senin, E. and Pastor Caño, Jose Ignacio and Paris, Anna and Martin Sanz, Antonia and Levenfeld, B. and Várez, A. (2011). Microstructure, magnetic and mechanical properties of Ni-Zn ferrites prepared by Powder Injection Moulding. "Powder Technology", v. 210 (n. 1); pp. 29-35. ISSN 0032-5910. https://doi.org/10.1016/j.powtec.2011.02.008.

Guinea Tortuero, Gustavo V. and Elices Calafat, Manuel and Plaza Baonza, Gustavo Ramón and Perea Abarca, Gracia Belén and Daza Garcia, Rafael and Riekel, Christian and Agulló-Rueda, Fernando and Hayashi, C. and Zhao, Y. and Pérez Rigueiro, José (2012). Minor ampullate silks from Nephila and Argiope spiders: tensile properties and microstructural characterization. "Biomacromolecules", v. 13 (n. 7); pp. 2087-2098. ISSN 1525-7797. https://doi.org/10.1021/bm3004644.

Gómez Sánchez, Francisco Javier and Ruiz Hervías, Jesús and Martín Rengel, Miguel Ángel and Torres, E. (2012). Nuevo procedimiento para determinar la curva tensión deformación plástica a partir del ensayo de compresión diametral. In: "XXIX Encuentro del Grupo Español de Fractura", 21/03/2012 - 23/03/2012, Bilbao, España.

Gómez Sánchez, Francisco Javier and Martín Rengel, Miguel Ángel and Ruiz Hervías, Jesús and Torres, E. (2012). Obtención de la energía de fractura a distintas temperaturas en una aleación de circonio a partir del ensayo de compresión diametral. In: "XXIX Encuentro del Grupo Español de Fractura", 21/03/2012 - 23/03/2012, Bilbao (España).

García Ayala, Esperanza Macarena and Tarancón Román, Sandra and González Granados, Zoilo and Ferrari Fernández, Begoña and Pastor Caño, José Ignacio and Sánchez Herencia, Antonio Javier (2019). Processing of WC/W Composites for Extreme Environments by Colloidal Dispersion of Powders and SPS Sintering. "International Journal of Refractory Metals & Hard Materials", v. 84 ; p. 105026. ISSN 0263-4368. https://doi.org/10.1016/j.ijrmhm.2019.105026.

Gómez Sánchez, Francisco Javier (1997). Un criterio de rotura en solidos entallados. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

H

Herrera-Solaz, V. and Llorca Martinez, Francisco Javier and Dogan, E. and Karaman, I. and Segurado Escudero, Javier (2014). An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy. "International Journal of Plasticity", v. 57 ; pp. 1-15. ISSN 0749-6419. https://doi.org/10.1016/j.ijplas.2014.02.001.

Herráez Matesanz, Miguel (2018). Computational Micromechanics Models for Damage and Fracture of Fiber-Reinforced Polymers. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.51735.

Hernández Rueda, Silvia (2013). Curing, defects and mechanical performance of fiber-reinforced composites. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Herrera-Solaz, V. and Hidalgo-Manrique, P. and Pérez Prado, María Teresa and Letzig, D. and Llorca Martinez, Francisco Javier and Segurado Escudero, Javier (2014). Effect of rare earth additions on the critical resolved shear stresses of magnesium alloys. "Materials Letters", v. 128 ; pp. 199-203. ISSN 0167-577X. https://doi.org/10.1016/j.matlet.2014.04.144.

Herrera Solaz, Vicente (2015). Microstructure-based numerical modeling of the mechanical behavior of Mg alloys. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Hernández, S. and Sket, Federico and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2013). Optimization of curing cycle in carbon fiber-reinforced laminates: Void distribution and mechanical properties. "Composites Science and Technology", v. 85 ; pp. 73-82. ISSN 0266-3538. https://doi.org/10.1016/j.compscitech.2013.06.005.

I

Iordachescu, Mihaela and Scutelnicu, Elena (2008). An overview of welding in solid state. "The Annals of “Dunarea de Jos” University Of Galati", v. 12 ; pp. 31-38. ISSN 1221-4639.

Iordachescu, Mihaela and Ruiz Hervías, Jesús and Iordachescu, Danut and Valiente Cancho, Andrés and Caballero, L. (2013). Characterisation of laser hybrid welded dissimilar joints. "Soldadura y tecnologías de unión" (n. 132); pp. 10-13. ISSN 1130-0280.

Iordachescu, Danut and Blasco Litago, Manuel and López, Raul and Cuesta Arranz, Alberto and Iordachescu, Mihaela and Ocaña Moreno, José Luis (2011). Development of Robotized Laser Welding Applications for Joining Thin Sheets. In: "Proceedings of the 6th edition of International Conference on Optimization of the Robots and Manipulators OPTIROB 2011", 26/05/2011 - 28/05/2011, Sinaia, Romania.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Ocaña Moreno, José Luis and Torres, E. and Ruiz Hervías, Jesús (2012). Fracture propagation and stress corrosion in the case of dissimilar laser hybrid welded joints. "The Annals of Dunarea de Jos University of Galati", v. 23 ; pp. 11-15. ISSN 1221-4639.

Iordachescu, Mihaela and Abreu Rodrigues, Maricely de and Valiente Cancho, Andrés (2017). Hydrogen Induced Damage in Heavily Cold-Drawn Wires of Duplex Stainless Steel. In: "2nd International Conference on Structural Integrity (ICSI 2017)", 4-7 Septiembre 2017, Funchal, Madeira, Portugal. ISBN 978-1-5108-4856-6. pp. 1304-1309. https://doi.org/10.1016/j.prostr.2017.07.117.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Caballero, Luis and Iordachescu, Danut and Ocaña Moreno, José Luis and Porro González, Juan Antonio (2012). Laser Shock Processing influence on local properties and overall tensile behavior of friction stir welded joints. "Surface and Coatings Technology", v. 206 (n. 8-9); pp. 2422-2429. ISSN 0257-8972. https://doi.org/10.1016/j.surfcoat.2011.10.044.

Iordachescu, Danut and Iordachescu, Mihaela and Georgescu, Bogdan and Scutelnicu, Elena and Ruiz Hervías, Jesús (2010). Magnetarc Welding - peculiarities of joining thin wall tubes. "Metalurgia International", v. XV (n. 4); pp. 1-4. ISSN 1582-2214.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Ruiz Hervías, Jesús and Ocaña Moreno, José Luis (2013). Mechanical behavior and residual stress field of dissimilar laser welded joints. "Metalurgia internaţional", v. 18 (n. 6); pp. 13-17. ISSN 1582-2214.

Iordachescu, Mihaela and Iordachescu, Gabriela and Scutelnicu, Elena and Iordachescu, Irina (2008). Needs for LLL improvements for supporting career couselling for self-employement. In: "5th International Seminar of Quality Management in the Higher Education", 12/06/2008-14/06/2008, Tulcea, Rumania. ISBN 978-973-730-496-4.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Luzin, V. and Ruiz Hervías, Jesús and Ocaña Moreno, José Luis (2012). Overall and local mechanical behaviour of dissimilar laser welded joints. In: "XXIX Encuentro del Grupo Español de Fractura", 21/03/2012 - 23/03/2012, Bilbao (España).

Iordachescu, Mihaela and Iordachescu, Gabriela and Scutelnicu, Elena and Iordachescu, Danut (2008). Quality Of The Vocational Training For Construction Inspectors. In: "5th International Seminar of Quality Management in the Higher Education", 12/06/2008-14/06/2008, Tulcea, Romania. ISBN 978-973-730-496-4.

Iordachescu, Mihaela and Ruiz Hervías, Jesús and Luzin, V. and Scutelnicu, Elena and Valiente Cancho, Andrés and Ocaña Moreno, José Luis (2013). Residual stress distribution in ferritic to austenitic steel joints made by laser welding,. "The Annals of Dunarea de Jos University of Galati", v. 24 (n. 12); pp. 45-49. ISSN 1221-4639.

Iordachescu, Mihaela and Ocaña Moreno, José Luis (2013). Residual stress distribution in ferritic-austenitic steel joints made by laser welding. "Soldadura y tecnologías de unión", v. 24 (n. 135); pp. 10-13. ISSN 1130-0280.

Iordachescu, Danut and Iordachescu, Mihaela and Planas Rosselló, Jaime and Ocaña Moreno, José Luis and Blasco Litago, Manuel (2008). Strain-Hardness Correlation in Aluminium Butt Cold Welded Joints. In: "Safety and reliability of welded components in energy and processing industry (International conference)", 10/07/2008-11/07/2008, Graz, Austria. ISBN 978-3-85125-019-0.

Iordachescu, Mihaela and Ruiz Hervías, Jesús and Iordachescu, Danut and Valiente Cancho, Andrés and Caballero Molano, Luis (2010). Thermal influence of welding process on strength overmatching of thin dissimilar sheets joints. In: "CIFIE 2010, Iberian Conference on Fracture and Structural integrity", 17/03/2010 - 19/03/2010, Oporto, Portugal.

J

Jérusalem, Antoine and Dickson, William and Pérez Martín, Maria Jesus and Dao, Ming and Lu, Jian and Gálvez Díaz-Rubio, Francisco (2013). Grain size gradient length scale in ballistic properties optimization of functionally graded nanocrystalline steel plates. "Scripta materialia", v. 69 (n. 11-12); pp. 773-776. ISSN 1359-6462. https://doi.org/10.1016/j.scriptamat.2013.08.025.

Juan Berná, Miriam (2014). Influencia del radio en entallas en U sometidas a flexión en tres puntos en la fundición GG-25. Thesis (Master thesis), E.T.S.I. Caminos, Canales y Puertos (UPM).

Jubera García, Rafael and Ridruejo Rodríguez, Álvaro and Gonzalez Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2014). Mechanical behavior and deformation micromechanisms of polypropylene nonwoven fabrics as a function of temperature and strain rate. "Mechanics of Materials", v. 74 ; pp. 14-25. ISSN 0167-6636. https://doi.org/10.1016/j.mechmat.2014.03.007.

K

Konstantopoulou, Konstantina and Pastor Caño, Jose Ignacio and Roa, J.J. and Segarra, M. (2010). Comportamiento mecánico de materiales masivos superconductores de segunda generación en función de la temperatura. In: "XXVII Encuentro del Grupo Español de Fractura", 25/03/2010 - 27/03/2010, Oporto, Portugal.

Konstantopoulou, Konstantina and Serazin, M. and Lloberas, J. and Granados, X. and Sanmarti, M. and Obradors, X. and Pastor Caño, Jose Ignacio (2013). Effect of strain and magnetic field on the critical current and electric resistance of the joints between HTS coated conductors. In: "Current Research in Large-Scale Applications of Superconductivity, IOP", 20/11/2013 - 20/11/2013, Institute of Physics, London, U.K..

Konstantopoulou, Konstantina and Serazin, M. and Lloberas, J. and Granados, X. and Sanmarti, M. and Obradors, X. and Pastor Caño, Jose Ignacio (2014). Effect of strain and magnetic field on the critical current and electric resistance of the joints between HTS coated conductors. In: "11th European Conference on Applied Superconductivity (EUCAS 2013)", 15/09/2013 - 19/09/2013, Genova, Italy. pp..

Konstantopoulou, Konstantina and Roa, J. J. and Jiménez Piqué, E. and Segarra, M. and Pastor Caño, Jose Ignacio (2014). Fracture micromechanisms and mechanical behavior of YBCO bulk superconductors at 77 and 300 K. "Ceramics International", v. 40 (n. 8); pp. 12797-12806. ISSN 0272-8842. https://doi.org/10.1016/j.ceramint.2014.04.134.

Konstantopoulou, Konstantina (2015). Mechanical behavior of 2G REBCO HTS at 77 and 300 K. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Konstantopoulou, Konstantina and Shi, Yunhua and Dennis, Anthony and Durrell, John and Pastor Caño, Jose Ignacio and Cardwell, David (2014). Mechanical characterization of GdBCO/Ag and YBCO single grains fabricated by top-seeded melt growth at 77 and 300 K. "Superconductor Science and Technology", v. 27 (n. 11); pp. 115011-115021. ISSN 0953-2048. https://doi.org/10.1088/0953-2048/27/11/115011.

Konstantopoulou, Konstantina and Pastor Caño, Jose Ignacio and Roa, J.J. and Segarra, M. (2012). Microestructura y propiedades mecánicas del material masivo superconductor YBCO a 300 Y 77 K.. In: "XXIX Encuentro del Grupo Español de Fractura", 21 de marzo de 2012 a 23 de marzo de 2012, Bilbao (España).

L

Llorca Martinez, Francisco Javier (2016). A roadmap for virtual testing and virtual processing of cast metallic materials. In: "Second International Workshop on Software Solutions for Integrated Computational Materials Engineering (ICME 2016)", 12/04/2016-15/04/2016, Barcelona, España. pp. 1-32.

Li, Jifeng (2019). Crystal Plasticity Simulation of the Thermo-mechanical Behavior in Polycrystalline Metals. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.57634.

Lotfian, S. and Mayer, C. and Chawla, N. and Llorca Martinez, Francisco Javier and Misra, A. and Baldwin, J. K. and Molina Aldareguía, Jon M. (2014). Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates. "Thin Solid Films", v. 571 (n. Part 2); pp. 260-267. ISSN 0040-6090. https://doi.org/10.1016/j.tsf.2014.06.022.

Lotfian, S. and Rodriguez, M. and Yazzie, K.E. and Chawla, N. and Llorca Martinez, Francisco Javier and Molina Aldareguía, Jon M. (2013). High temperature micropillar compression of Al/SiC nanolaminates. "Acta Materialia", v. 61 (n. 12); pp. 4439-4451. ISSN 1359-6454. https://doi.org/10.1016/j.actamat.2013.04.013.

Lotfian, S. and Molina Aldareguía, Jon M. and Yazzie, K.E. and Llorca Martinez, Francisco Javier and Chawla, N. (2012). High temperature nanoindentation behavior of Al/SiC multilayers. "Philosophical Magazine Letters", v. 92 (n. 8); pp. 362-367. ISSN 0950-0839. https://doi.org/10.1080/09500839.2012.674220.

Li, Na (2019). High-throughput screening of strength and creep properties in Mg-Zn alloys. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.57617.

Li, Zhi (2018). Ignition Delaying and Smoke Suppression Studyof Fire-Retardant Polymer Composites. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.52068.

Lotfian, S. and Molina Aldareguía, Jon M. and Yazzie, K.E. and Llorca Martinez, Francisco Javier and Chawla, N. (2013). Mechanical Characterization of Lead-Free Sn-Ag-Cu Solder Joints by High-Temperature Nanoindentation. "Journal of electronic materials", v. 42 (n. 6); pp. 1085-1091. ISSN 0361-5235. https://doi.org/10.1007/s11664-013-2517-z.

Lucarini San José, Sergio (2020). Micromechanics based fatigue modeling using Fast Fourier Transform based homogenization. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.62552.

Llorca Martinez, Francisco Javier and González Martínez, Carlos Daniel and Molina Aldareguía, Jon M. and Lópes, C. S. (2013). Multiscale Modeling of Composites: Toward Virtual Testing ... and Beyond. "JOM Journal of the Minerals, Metals and Materials Society", v. 65 (n. 2); pp. 215-225. ISSN 1047-4838. https://doi.org/10.1007/s11837-012-0509-8.

Lópes, C. S. and Sádaba, Sergio and Gonzalez Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier and Camanho, P.P. (2016). Physically-sound simulation of low-velocity impact on fiber reinforced laminates. "International Journal of Impact Engineering", v. 92 ; pp. 3-17. ISSN 0734-743X. https://doi.org/10.1016/j.ijimpeng.2015.05.014.

M

Molina Aldareguía, Jon M. and Rodriguez, M. and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2011). An experimental and Numerical Study of the Influence of local Effects on the applications of the fibre push-in test. "Philosophical Magazine", v. 91 (n. 7-9); pp. 1293-1307. ISSN 1478-6435. https://doi.org/10.1080/14786435.2010.480947.

Molina Aldareguía, Jon M. and Rodriguez, M. and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2010). An experimental and numerical study of the influence of local effects on the application of the fibre push-in tests. In: "XXVII Encuentro del Grupo Español de Fractura", 27/05/2010 - 29/05/2010, Oporto, Portugal.

Muñoz Moreno, Rocío and Ruiz Navas, Elisa María and Boehlert, Carl and Llorca Martinez, Francisco Javier and Torralba, J. M and Pérez Prado, María Teresa (2014). Analysis of crystallographic slip and grain boundary sliding in a Ti-45Al-2Nb-2Mn (at%)-0.8 vol%TiB2 alloy by high temperature in situ mechanical testing. "Materials Science and Engineering: A", v. 606 ; pp. 276-289. ISSN 0921-5093. https://doi.org/10.1016/j.msea.2014.03.078.

Martínez Collado, Diana (2014). Análisis experimental del efecto de las presiones hidrostáticas en la plastificación de materiales metálicos. Thesis (Master thesis), E.T.S.I. Caminos, Canales y Puertos (UPM).

Morel, S. and Lespine, C. and Coureau, J.L. and Planas Rosselló, Jaime and Dourado, N. (2010). Bilinear softening parameters and equivalent LEFM R-curve in quasibrittle failure. "Journal of Solids and Structures", v. 47 (n. 6); pp. 837-850. ISSN 0020-7683. https://doi.org/10.1016/j.ijsolstr.2009.11.022.

Medina M., Carlos and Molina Aldareguía, Jon M. and González, Carlos and Melendrez, Manuel F. and Flores, Paulo and Llorca Martinez, Francisco Javier (2015). Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials. "Journal of Composite Materials" ; pp. 1-9. ISSN 1530-793X. https://doi.org/10.1177/0021998315595115.

Martin Sanz, Antonia and Fernandez Jimenez, Ana and Pastor Caño, Jose Ignacio and Palomo, Angel (2010). Comportamiento mecánico a altas temperaturas de cementos de ceniza volante activados alcalinamente. In: "XXVII Encuentro del Grupo Español de Fractura", 17/03/2010 - 19/03/2010, Oporto, Portugal.

Muñoz, R. and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2013). Damage mechanisms of 3D woven hybrid composites in tension. Testing, inspection and simulation. In: "6th. International Conference on Composites Testing and Model Identification", 22/04/2013 - 24/04/2013, Aalborg. Dinamarca.

Mendoza Novelo, Birzabit and Avila, Eva and Cauich Rodríguez, Juan V. and Jorge Herrero, Eduardo and Rojo Pérez, Francisco Javier and Guinea Tortuero, Gustavo V. and Mata Mata, José L. (2011). Decellularization of pericardial tissue and its impact on tensile viscoelasticity and glycosaminoglycan content. "Acta Biomaterialia", v. 7 (n. 3); pp. 1241-1248. ISSN 1742-7061. https://doi.org/10.1016/j.actbio.2010.11.017.

Martín Rengel, Miguel Ángel and Gómez Sánchez, Francisco Javier and Ruiz Hervías, Jesús and Caballero Molano, Luis (2013). Determination of the hoop fracture properties of unirradiated hydrogen-charged nuclear fuel cladding from ring compression tests. "Journal of nuclear materials", v. 436 (n. 1-3); pp. 123-129. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2013.01.311.

Muñoz Moreno, Rocío and Pérez Prado, María Teresa and Llorca Martinez, Francisco Javier and Ruiz Navas, Elisa María and Boehlert, Carl (2013). Effect of Stress Level on the High Temperature Deformation and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: An In Situ Experimental Study. "Metallurgical and materials transactions. A, Physical metallurgy and materials science", v. 44 (n. 4); pp. 1887-1896. ISSN 1073-5623. https://doi.org/10.1007/s11661-012-1515-8.

Milenkovic, Srdjan and Sabirov, Ilchat and Llorca Martinez, Francisco Javier (2012). Effect of the cooling rate on microstructure and hardness of MAR-M247 Ni-based superalloy. "Materials Letters", v. 73 ; pp. 216-219. ISSN 0167-577X. https://doi.org/10.1016/j.matlet.2012.01.028.

Moyano Subires, Juan José (2020). Estructuras tridimensionales compuestas de material inorgánico y grafeno multicapa obtenidas mediante impresión directa. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.62579.

Martín Rengel, Miguel Ángel and Gomez, F.J. and Ruiz Hervías, Jesús and Caballero Molano, Luis and Valiente Cancho, Andrés (2010). Estudio del Comportamiento en Fractura de Vainas de Combustible Nuclear fragilizadas por Hidruros. In: "XXVII Encuentro del Grupo Español de Fractura", 25/03/2010 - 27/03/2010, Oporto, Portugal.

Morales Alonso, Gustavo (2013). Experimental and numerical analysis of reinforced concrete elements subjected to blast loading. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Moraleda Palmero, Joaquín and Segurado Escudero, Javier and Llorca Martinez, Francisco Javier (2007). Finite Deformation of Porous Elastomers: A Computational Micromechanics Approach. "Philosophical Magazine", v. 87 (n. 35); pp. 5607-5627. ISSN 1478-6435. https://doi.org/10.1080/14786430701678930.

Moya Cuenca, Alicia (2017). Hybrid systems based on metal oxide and nanocarbons: electronic properties and applications for photocatalysis. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.46046.

Martínez-Hergueta, Francisca and Gálvez Díaz-Rubio, Francisco and Gonzalez Martínez, Carlos Daniel (2014). Influence of the Fiber Alignment in the Ballistic Performance of Dyneema Non-Woven Fabrics. In: "28th International Symposium on Ballistics (ISB)", 24/09/2014-26/09/2014, Atlanta, Georgia, USA. ISBN 978-1-60595-149-2. pp. 931-941.

Martín Rengel, Miguel Ángel (2009). Integridad estructural de vainas de combustible nuclear en condiciones de almacenamiento temporal en seco. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Moreno Revilla, Jesús (2005). Integridad estructural de vigas roblonadas de acero estructural antiguo. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Muñoz, R. and Martínez, V. and Sket, Federico and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2014). Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension. "Composites Part A: Applied Science and Manufacturing", v. 59 ; pp. 93-104. ISSN 1359-835X. https://doi.org/10.1016/j.compositesa.2014.01.003.

Martin Sanz, Antonia and Ajejas, F. and Moreno, S. and Pastor Caño, Jose Ignacio and Palomo, Angel and Fernandez Jimenez, Ana (2013). Mechanical behavior of alkali-cement as function of the temperature.. In: "EUROMAT 2013. European Congress and Exhibition on Advanced Materials and Processes.", 08/09/2013 - 13/09/2013, Sevilla. España. pp..

Montini Ballarin, Florencia and Calvo Aguilar, Daniel and Caracciolo, Pablo C. and Rojo Pérez, Francisco Javier and Frontini, Patricia M. and Abraham, Gustavo A. and Guinea Tortuero, Gustavo V. (2016). Mechanical behavior of bilayered small-diameter nanofibrous structures as biomimetic vascular grafts. "Journal of the Mechanical Behavior of Biomedical Materials", v. 60 ; pp. 220-233. ISSN 1751-6161. https://doi.org/10.1016/j.jmbbm.2016.01.025.

Mesa, M.C. and Oliete Terraz, Patricia Beatriz and Pastor Caño, Jose Ignacio and Martin Sanz, Antonia and Llorca Martinez, Francisco Javier (2014). Mechanical properties up to 1900 K of Al2O3/Er3Al5O12/ZrO2 eutectic ceramics grown by the laser floating zone method. "Journal of the European Ceramic Society", v. 34 (n. 9); pp. 2081-2087. ISSN 0955-2219. https://doi.org/10.1016/j.jeurceramsoc.2013.11.013.

Müller, Alexander von and Ewert, Dagmar and Galatanu, Magdalena and Milwich, Markus and Neu, Rudolf and Pastor Caño, Jose Ignacio and Siefken, Udo and Tejado Garrido, Elena María and You, J.H. (2016). Melt infiltrated Tungsten-Copper composites as advanced heat sink materials for plasma facing components of future nuclear fusion devices. In: "29th Symposium on Fusion Technology (SOFT 2016)", 05/09/2016-09/09/2016, Praga, República Checa. pp. 1-5.

Müller, A. V. and Ewert, D. and Galatanu, A. and Milwich, M and Neu, R. and Pastor Caño, Jose Ignacio and Siefken, U. and Tejado Garrido, Elena María and You, J.H. (2017). Melt infiltrated tungsten–copper composites as advanced heat sink materials for plasma facing components of future nuclear fusion devices. "Fusion Engineering and Design" ; pp. 1-5. ISSN 0920-3796. https://doi.org/10.1016/j.fusengdes.2017.01.042.

Mesa, M.C. and Oliete Terraz, Patricia Beatriz and Larrea, Angel and Orera, V.M. and Pastor Caño, Jose Ignacio and Martin Sanz, Antonia and Llorca Martinez, Francisco Javier (2010). Microestructura y propiedades mecánicas de fibras cerámicas eutécticas Al2O3/Er3Al5O12/ZrO2 procesadas por fusión zonal por láser.. In: "XI Congreso Nacional de Materiales", 23/06/2010 - 25/06/2010, Zaragoza, España.

Moraleda Palmero, Joaquín (2009). Micromecánica de elastómeros porosos y reforzados con fibras. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Muñoz, A. and Savoini, B. and Monge, M.A. and Pastor Caño, Jose Ignacio and Tejado Garrido, Elena María and Pareja, R. (2013). Microstructural and mechanical characteristics of W-2Ti and W-1TiC processed by Hot Isostatic Pressing. In: "16th International Conference on Fusion Reactor Materials, ICFRM 16", 20/10/2013 - 26/10/2013, Beijing, China.

Muñoz, A. and Savoini, B. and Tejado Garrido, Elena María and Monge, M.A. and Pastor Caño, Jose Ignacio and Pareja, R. (2014). Microstructural and mechanical characteristics of W-2Ti and W-1TiC processed by hot isostatic pressing. "Journal of Nuclear Materials", v. 455 (n. 1-3); pp. 306-310. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2014.06.064.

Mesa, M.C. and Oliete Terraz, Patricia Beatriz and Orera, V.M. and Pastor Caño, Jose Ignacio and Martin Sanz, Antonia and Llorca Martinez, Francisco Javier (2011). Microstructural and mechanical study of AL2O3/Er3Al5O12 eutectic rods grown by the laser floating zone method. "Journal of the European Ceramic Society", v. 31 (n. 7); pp. 1241-1250. ISSN 0955-2219. https://doi.org/10.1016/j.jeurceramsoc.2010.05.004.

Monclús, M. A. and Karlik, M. and Callisti, M. and Frutos, E. and Llorca Martinez, Francisco Javier and Polcar, T. and Molina Aldareguía, Jon M. (2014). Microstructure and mechanical properties of physical vapor deposited Cu/W nanoscale multilayers: Influence of layer thickness and temperature. "Thin Solid Films", v. 571 ; pp. 275-282. ISSN 0040-6090. https://doi.org/10.1016/j.tsf.2014.05.044.

Marvi Mashhadi, Mohammad (2018). Multiscale Characterization and Modelling of Polyurethane Foams. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.51715.

Martínez Hergueta, Francisca (2016). Multiscale analysis of the mechanical behavior of needle-punched nonwoven fabrics. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.39432.

Monclús, M. A. and Zheng, S. J. and Mayeur, J. R. and Beyerlein, I. J. and Mara, N. A. and Polcar, T. and Llorca Martinez, Francisco Javier and Molina Aldareguía, Jon M. (2013). Optimum high temperature strength of two-dimensional nanocomposites. "APL Materials", v. 1 (n. 052103); pp. 1-7. ISSN 2166-532X. https://doi.org/10.1063/1.4828757.

Moreno Pérez, Rafael (2015). Resistencia a la rotura dúctil en uniones soldadas estructurales de acero de construcción. Thesis (Master thesis), E.T.S.I. Caminos, Canales y Puertos (UPM).

Martín Rengel, Miguel Ángel and Gómez Sánchez, Francisco Javier and Ruiz Hervías, Jesús and Caballero Molano, Luis and Valiente Cancho, Andrés (2012). Revisiting the method to obtain the mechanical properties of hydrided fuel cladding in the hoop direction. "Journal of Nuclear Materials", v. 429 (n. 1–3); pp. 276-283. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2012.06.003.

Mendoza Novelo, Birzabit and Alvarado Castro, Diego I. and Mata Mata, José L. and Cauich Rodríguez, Juan V. and Vega González, Arturo and Jorge Herrero, Eduardo and Rojo Pérez, Francisco Javier and Guinea Tortuero, Gustavo V. (2013). Stability and mechanical evaluation of bovine pericardium cross-linked with polyurethane prepolymer in aqueous medium. "Materials science and engineering. C, Materials for biological applications", v. 33 (n. 4); pp. 2392-2398. ISSN 0928-4931. https://doi.org/10.1016/j.msec2013.02.001.

N

Novak, S. and Iveković, A. and Blagoeva, D. and Evans, L. and Galatanu, A. and Pastor Caño, Jose Ignacio (2013). Fabrication and properties of the SITE-SiCf/SiC composite. In: "16th International Conference on Fusion Reactor Materials, ICFRM 16", 20/10/2013 - 26/10/2013, Beijing, China.

Nguyen, Viet Duc (2015). Mechanical behaviour of laminated functionally graded fibre-reinforced self-compacting cementitious composites. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Naya Montáns, Fernando (2017). Prediction of mechanical properties of unidirectional FRP plies at different environmental conditions by means of computational micromechanics. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.46239.

O

Oña Vera, Mónica Yolanda (2014). Estudio experimental de elementos de protección de hormigón armado sometidos a explosiones. Thesis (Master thesis), E.T.S.I. Caminos, Canales y Puertos (UPM).

Orellana Pérez, T. and Tejado Garrido, Elena María and Funke, V.C. and Fütterer, W. and Riepe, S. and Möller, H.J. and Pastor Caño, Jose Ignacio (2015). How do Impurity Inclusions Influence the Mechanical Properties of Multicrystalline Silicon?. "International Journal of Metallurgical & Materials Engineering", v. 1 ; pp. 1-11. ISSN 2455-2372. https://doi.org/10.15344/2455-2372/2015/101.

Ou, Yunfu (2020). Hybrid FRP/CNT veil hierarchical composites with enhanced interlaminar properties and integrated multifunctionalities. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.65573.

Orellana Pérez, T. and Funke, Claudia and Futterer, W. and Riepe, S. and Möller, H.J. and Tejado Garrido, Elena María and Pastor Caño, Jose Ignacio (2011). Impact of Impurities on the Mechanical Strength of Multicrystalline Silicon. In: "26th European Photovoltaic Solar Energy Conference and Exhibition, EU PVSEC", 05/09/2011 - 09/09/2011, Hamburg, Germany. ISBN 3-936338-27-2. pp. 1864-1870. https://doi.org/10.4229/26thEUPVSEC2011-2BV.4.23.

Orellana Pérez, T. and Tejado Garrido, Elena María and Funke, V.C. and Riepe, S. and Pastor Caño, Jose Ignacio and Möller, H.J. (2014). Influence of high aluminium content on the mechanical properties of directionally solidified multicrystalline silicon. "Journal of Materials Science", v. 49 (n. 14); pp. 4905-4918. ISSN 0022-2461. https://doi.org/10.1007/s10853-014-8192-5.

Orellana Barrasa, Jaime and Tarancón Román, Sandra and Tejado Garrido, Elena María and Pastor Caño, Jose Ignacio (2020). Instagram, a Tool for Teaching your Students. In: "CIVINEDU 2020 4th International Virtual Conference on Educational Research and Innovation", September 23 - 24, 2020. ISBN 978-84-09-22966-6. pp. 223-224.

P

Pérez Martín, Maria Jesus and Erice Echávarri, Borja and Cendón Franco, David Ángel and Gálvez Díaz-Rubio, Francisco (2014). A novel method for measuring the dynamic fracture-initiation toughness under impulsive loadings. In: "28th International Symposium on Ballistics (ISB)", 24/09/2014-26/09/2014, Atlanta, Georgia, USA. ISBN 978-1-60595-149-2. pp. 211-219.

Prieto de Pedro, Mónica and Martín-Bragado, I. and Segurado Escudero, Javier (2015). An Atomistically Informed Kinetic Monte Carlo Model of Grain Boundary Motion Coupled to Shear Deformation. "International Journal of Plasticity", v. 68 ; pp. 98-110. ISSN 0749-6419. https://doi.org/10.1016/j.ijplas.2014.11.005.

Pérez Martín, Maria Jesus and Erice Echávarri, Borja and Cendón Franco, David Ángel and Gálvez Díaz-Rubio, Francisco (2012). Análisis de metodologías para la medida de la resistencia a tracción por spalling. "Anales de la Mecánica de la Fractura", v. 29 ; pp. 635-640. ISSN 0213-3725.

Prieto Depedro, Mónica and Payet, A. and Sklénard, B. and Martín-Bragado, Ignacio (2017). Atomistic Modeling of the Ge Composition Dependence of Solid Phase Epitaxial Regrowth in SiGe Alloys. "Journal of Applied Physics", v. 122 (n. 10); p. 105702. ISSN 0021-8979. https://doi.org/10.1063/1.4999987.

Plaza Baonza, Gustavo Ramón and Musa, A. and Pérez Rigueiro, José and Pons, A. and Perea Abarca, Gracia Belén and Elices Calafat, Manuel and Guinea Tortuero, Gustavo V. (2008). Comparación de la Resistencia mecánica y disipación de energía de la seda de seguridad y de la seda víscida de araña. "Análes de Mecánica de la Fractura", v. 25 ; pp. 41-46. ISSN 0213-3725.

Palacios García, Teresa and Jiménez, A. and Pastor Caño, Jose Ignacio and Muñoz, A. and Monge, M.A. and Pareja, R. (2012). Comportamiento mecánico de la aleación W+1%Y2O3 en función de la atmósfera y la temperatura. In: "XXIX Encuentro del Grupo Español de Fractura", 21 de marzo de 2012 a 23 de marzo de 2012, Bilbao (España).

Presas Mata, Marina (2008). Comportamiento mecánico de materiales celulares de carburo de silicio. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Palacios García, Teresa and Aguirre Cebrian, Maria Vega and Martin Sanz, Antonia and Pastor Caño, Jose Ignacio and Llorca Martinez, Francisco Javier and Monge, M.A. and Muñoz, A. and Pareja, R. (2010). Comportamiento mecánico en función de la temperatura de aleaciones wolframio-vanadio.. In: "XI Congreso Nacional de Materiales", 23/06/2010 - 25/06/2010, Zaragoza, España. ISBN 9788492522248.

Plaza Baonza, Gustavo Ramón (2004). Comportamiento termo-higro-mecánico de las fibras de seda de araña. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Plaza Baonza, Gustavo Ramón and Uyeda, Taro Q. P. (2013). Contraction speed of the actomyosin cytoskeleton in the absence of the cell membrane. "Soft Matter", v. 9 (n. 17); pp. 4390-4400. ISSN 1744-683X. https://doi.org/10.1039/c3sm27867k.

Plaza Baonza, Gustavo Ramón and Corsini, Paola and Marsano, Enrico and Pérez Rigueiro, José and Elices Calafat, Manuel and Riekel, Christian and Vendrely, Charlotte and Guinea Tortuero, Gustavo V. (2012). Correlation Between Processing Conditions, Microstructure and Mechanical Behavior in Regenerated Silkworm Silk Fibers. "Journal of Applied Polymer Science, B : Polymer Physics", v. 50 (n. 7); pp. 455-465. ISSN 0887-6266. https://doi.org/10.1002/polb.23025.

Pérez Martín, María Jesús (2017). Dynamic fracture of high-strength metallic alloys: experiments and modelling. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.47644.

Perea Abarca, Gracia Belén and Pérez Rigueiro, José and Plaza Baonza, Gustavo Ramón and Guinea Tortuero, Gustavo V. and Elices Calafat, Manuel (2010). Efecto de la Longitud de onda de la radiación UV sobre la seda de araña. In: "XXVII Encuentro del Grupo Español de Fractura", 25/03/2010 - 27/03/2010, Oporto, Portugal.

Plaza Baonza, Gustavo Ramón and Corsini, Paola and Pérez Rigueiro, José and Marsano, Enrico and Guinea Tortuero, Gustavo V. and Elices Calafat, Manuel (2008). Effect of water on Bombyx mori regenerated silk fibers and its application in modifying their mechanical properties. "Journal of Applied Polymer Science", v. 109 (n. 3); pp. 1793-1801. ISSN 0021-8995. https://doi.org/10.1002/app.28288.

Plaza Baonza, Gustavo Ramón (2010). Energy Distribution in disordered elastic Networks. "Physical Review E", v. 82 (n. 3); pp.. ISSN 1539-3755. https://doi.org/10.1103/PhysRevE.82.031902.

Pérez Guerrero, Mariángel (2017). Fisuración asistida por agua de mar en barras de acero de alta resistencia para construcción. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.49040.

Pastor Caño, Jose Ignacio (1993). Fractura de materiales cerámicos estructurales avanzados. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Pastor Caño, Jose Ignacio and Llorca Martinez, Francisco Javier and Martin Sanz, Antonia and Peña Torre, José Ignacio and Oliete Terraz, Patricia Beatriz (2008). Fracture Toughness and Strength of Al2O3-Y3Al5O12 and Al2O3-Y3Al5O12-ZrO2 Directionally-Solidified Eutetic Oxides up to 1900K. "Journal of The European Ceramic Society", v. 28 (n. 12); pp. 2345-2351. ISSN 0955-2219. https://doi.org/10.1016/j.jeurceramsoc.2008.01.006.

Pérez Martín, Maria Jesus and Enfedaque Díaz, Alejandro and Dickson, William and Gálvez Díaz-Rubio, Francisco (2013). Impact Behavior of Hybrid Glass/Carbon Epoxy Composites. "Journal of Applied Mechanics", v. 80 (n. 3); pp. 1-7. ISSN 0021-8936. https://doi.org/10.1115/1.4023344.

Palacios García, Teresa and Muñoz, A. and Pastor Caño, Jose Ignacio (2013). Influence of Temperature and Atmosphere in Tungsten-Titanium-Lanthana Alloys. In: "Euromat 2013. European Congress and Exhibition on Advanced Materials and Processes.", 08/09/2013 - 13/09/2013, Sevilla. España.

Perea Abarca, Gracia Belén and Guinea Tortuero, Gustavo V. and Pérez Rigueiro, José and Plaza Baonza, Gustavo Ramón and Karatzas, C. and Elices Calafat, Manuel (2011). Influencia de la radiación UV en las propiedades mecánicas y en el comportamiento en fractura de un polimero artificial bioinspirado en la seda de araña. In: "XXVIII Encuentro del Grupo Español de Fractura", 06/04/2011 - 08/04/2011, Gijón, España. ISBN ISSN 0213-3725.

Perea Abarca, Gracia Belén (2010). Influencia de la radiación ultravioleta en el comportamiento mecánico y en la microestructura de las fibras de seda de araña. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Palacios García, Teresa and Tejado Garrido, Elena María and Pastor Caño, Jose Ignacio and Muñoz, A. (2013). Mechanical Characterization of Tungsten-Titanium-Lanthana alloy: Influence of Temperature and Atmosphere. In: "14th International Conference on Plasma-Facing Materials and Components for Fusion Applications", 13/05/2013 - 17/05/2013, Jülich. Alemania. pp..

Palacios García, Teresa and Pastor Caño, Jose Ignacio and Muñoz, A. (2013). Mechanical Degradation of Tungsten Alloys at Extreme Temperatures in Vacuum and Oxidation Atmospheres. In: "The Materials Modeling and Simulation for Nuclear Fuels (MMSNF) 2013 workshop.", 14/10/2013 - 16/10/2013, Chicago. EE.UU..

Palacios García, Teresa and Pastor Caño, Jose Ignacio and Aguirre Cebrian, Maria Vega and Martin Sanz, Antonia and Monge, M. A. and Muñoz, A. and Pareja, R. (2013). Mechanical behavior of tungsten-vanadium-lanthana alloys as function of temperature. "Journal of nuclear materials", v. 442 (n. 1-3, S); pp.. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2013.02.006.

Palacios García, Teresa and Jiménez, A. and Muñoz, A. and Monge, M.A. and Ballesteros, C. and Pastor Caño, Jose Ignacio (2014). Mechanical characterisation of tungsten-1wt.% yttrium oxide as a function of temperature and atmosphere. "Journal of Nuclear Materials", v. 454 ; pp. 455-461. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2014.09.012.

Planas Rosselló, Jaime and Radi, E. and Stickle, M.M. and Mariano, P.M. (2010). Mechanics of Interfacial Cracks between dissimilar Quasicrystals. In: "XXVII Encuentro del Grupo Español de Fractura", 25/03/2010 - 27/03/2010, Oporto, Portugal.

Palomares García, Alberto Jesús (2017). Micromechanics of fully lamellar TiAl alloys: effect of lamellar orientation and width. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.48862.

Palacios García, Teresa and Reiser, J. and Hoffmann, J. and Rieth, M. and Hoffmann, A. and Pastor Caño, Jose Ignacio (2015). Microstructural and mechanical characterization of annealed tungsten (W) and potassium-doped tungsten foils. "International Journal of Refractory Metals and Hard Materials", v. 48 ; pp. 145-149. ISSN 0263-4368. https://doi.org/10.1016/j.ijrmhm.2014.09.005.

Palacios García, Teresa (2015). Microstructural and mechanical characterization of tungsten based materials for fusion reactors. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Prieto de Pedro, Mónica and Romero, I. and Martín-Bragado, Ignacio (2015). Multiscale Modeling of Defect Formation During Solid-Phase Epitaxy Regrowth of Silicon. "Acta Materialia", v. 82 ; pp. 115-122. ISSN 1359-6454. https://doi.org/10.1016/j.actamat.2014.07.067.

Planas Rosselló, Jaime and Sancho Aznal, José María and Sanz Merino, Beatriz and Fathy Abdelaziz, Adel Mohamed and Aranguren, A. and Gálvez Ruiz, Jaime and Cendón Franco, David Ángel (2013). Numerical simulation of the transition from densely distributed to localized cracking.. In: "FraMCoS8. 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures.", 10/03/2013-14/03/2013, Toledo. España.

Pérez Martín, Maria Jesus and Erice Echávarri, Borja and Gálvez Díaz-Rubio, Francisco (2014). On the loading-rate dependence of the Al 7017-T73 fracture-initiation toughness. "Procedia Materials Science", v. 3 ; pp. 1026-1031. ISSN 2211-8128. https://doi.org/10.1016/j.mspro.2014.06.167.

Pérez Martín, Maria Jesus and Erice Echávarri, Borja and Gálvez Díaz-Rubio, Francisco (2016). Rate and temperature dependent plasticity and failure of AA7017-T73: experiments and modelling. "Anales de Mecánica de la Fractura", v. 33 ; pp. 316-321. ISSN 0213-3725.

Pérez Martín, Maria Jesus and Erice Echávarri, Borja and Cendón Franco, David Ángel and Gálvez Díaz-Rubio, Francisco (2012). Spalling uniaxial strength of Al2O3 at high strain rates. "The European Physical Journal Special Topics", v. 206 (n. 1); pp. 117-128. ISSN 1951-6355. https://doi.org/10.1140/epjst/e2012-01593-3.

Paleczny, A.M. and Rojo Pérez, Francisco Javier and Atienza Riera, José Miguel and Bourges, Jean Yves and Guinea Tortuero, Gustavo V. (2011). Strength and stiffness of repaired tendons. In: "XXVIII Encuentro del Grupo Español de Fractura", 06/04/2011 - 08/04/2011, Gijón, España. ISBN ISSN 0213-3725.

Plaza Baonza, Gustavo Ramón and Uyeda, Taro Q. P. and Mirzaei, Zahra and Simmons, Craig A. (2015). Study of the influence of actin-binding proteins using linear analyses of cell deformability. "Soft Matter", v. 11 (n. 27); pp. 5435-5446. ISSN 1744-683X. https://doi.org/10.1039/C5SM00125K.

Pastor Caño, Jose Ignacio and Martin Sanz, Antonia and Molina Aldareguía, Jon M. and Llorca Martinez, Francisco Javier and Oliete Terraz, Patricia Beatriz and Larrea, Angel and Peña Torre, José Ignacio and Orera, V.M. and Arenal, Raúl (2013). Superplastic deformation of directionally solidified nanofibrillar Al2O3-Y3Al5O12-ZrO2 eutectics. "Journal of the European Ceramic Society", v. 33 (n. 13-14); pp. 2579-2586. ISSN 0955-2219. https://doi.org/10.1016/j.jeurceramsoc.2013.03.033.

Pan, Yetang (2017). Synthesis of nano-flame retardant and its use as a promising substitute of antimony trioxide in flame retardant flexible poly(vinyl chloride). Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.49347.

Pérez Martín, Maria Jesus and Erice Echávarri, Borja and Gálvez Díaz-Rubio, Francisco (2015). Tenacidad de fractura dinámica de iniciación a diferentes velocidades de solicitación: técnicas experimentales. pp. 351-356.

Q

Qu, Bo and Martin Sanz, Antonia and Pastor Caño, Jose Ignacio and Palomo, Angel and Fernández Jiménez, A. (2015). Portland cement versus hybrid cement and geopolymers: performance at high temperatures. In: "14th International Congress on the Chemistry of Cement (ICCC 2015)", 13-16 octubre 2015, Beijing, China. pp. 1-10.

R

Ridruejo Rodríguez, Álvaro and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2012). A constitutive model for the in-plane mechanical behavior of nonwoven fabrics. "International Journal of Solids and Structures", v. 49 (n. 17); pp. 2215-2229. ISSN 0020-7683. https://doi.org/10.1016/j.ijsolstr.2012.04.014.

Rodriguez, M. and Molina Aldareguía, Jon M. and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2012). A methodology to measure the interface shear strength by means of the fiber push-in test. "Composites Science and Technology", v. 72 (n. 15); pp. 1924-1932. ISSN 0266-3538.

Rodriguez, M. and Molina Aldareguía, Jon M. and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2012). A novel methodology to determine the mechanical properties of amorphous materials through instrumented nanoindentation. In: "2012 MRS Fall Meeting & Exhibit (Materials Research Society)", 25/11/2012 - 30/11/2012, Boston, Massachusetts. p. 1.

Reyes Pozo, Encarnación and Gálvez Ruiz, Jaime and Casati Calzada, María Jesús and Cendón Franco, David Ángel and Sancho Aznal, José María and Planas Rosselló, Jaime (2009). An embedded cohesive crack model for finite element analysis of brickwork masonry fracture. "Engineering Fracture Mechanics", v. 76 (n. 12); pp. 1930-1944. ISSN 0013-7944. https://doi.org/10.1016/j.engfracmech.2009.05.002.

Rojo Pérez, Francisco Javier (2003). Aplicación de la mecánica de la fractura a la rotura frágil de fibras de sémola. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Ridruejo Rodríguez, Álvaro and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2010). Comportamiento en Fractura de un fieltro de fibra de vidrio. In: "XXVII Encuentro del Grupo Español de Fractura", 25/03/2010 - 27/03/2010, Oporto, Portugal.

Ruiz Hervías, Jesús and Atienza Riera, José Miguel and Elices Calafat, Manuel (2008). Control de las tensiones residuales como herramienta de mejora de los alambres de pretensado: 1. Caracterización de las tensiones residuales. "Anales De Mecánica De La Fractura", v. 25 (n. 33); pp. 199-204. ISSN 0213-3725.

Ruiz Hervías, Jesús and Atienza Riera, José Miguel and Elices Calafat, Manuel (2008). Control de las tensiones residuales como herramienta de mejora de los alambres de pretensado: 2. Optimización de las propiedades mecánicas. "Anales de Mecánica de la Fractura", v. 25 (n. 34); pp. 205-210. ISSN 0213-3725.

Ridruejo Rodríguez, Álvaro and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2012). Damage localization and failure locus under biaxial loading in glass-fiber nonwoven felts. "International Journal for Multiscale Computational Engineering", v. 10 (n. 5); pp. 425-440. ISSN 1543-1649.

Rodriguez, M. and Molina Aldareguía, Jon M. and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2012). Determination of the mechanical properties of amorphous materials through instrumented nanoindentation. "Acta Materialia", v. 60 (n. 9); pp. 3953-3964. ISSN 1359-6454. https://doi.org/10.1016/j.actamat.2012.03.027.

Rezvanian, Parsa (2018). Development and characterization of functionalized titanium biomaterials with tunable biological properties. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.51352.

Romero Olleros, Ignacio and Segurado Escudero, Javier and Llorca Martinez, Francisco Javier (2008). Dislocation Dynamics in Non-conves Domains using Finite Elements with Embedded Discontinuities. "Modelling and Simulation in Materials Science and Engineering", v. 16 (n. 3); pp. 1-19. ISSN 0965-0393. https://doi.org/10.1088/0965-0393/16/3/035008.

Rojo Pérez, Francisco Javier and Atienza Riera, José Miguel and Guinea Tortuero, Gustavo V. and Elices Calafat, Manuel (2008). Efecto de la temperatura en la rotura por despegue de una placa de ateroma. "Anales de Mecánica de la Fractura", v. 25 (n. 3); pp. 17-22. ISSN 0213-3725.

Ridruejo Rodríguez, Álvaro and Jubera García, Rafael and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2015). Efecto de sensibilidad inversa a entalla en un Nonwoven de polipropileno. In: "XI Congreso Nacional de Materiales Compuestos MATCOMP’15", 6-8 julio, 2015, Móstoles, España. ISBN 978-84-697-0406-6. pp. 1141-1146.

Rojo Pérez, Francisco Javier and Garcia Paez, J.M. and Jorge Herrero, Eduardo and Atienza Riera, José Miguel and Millan, I. and Rocha, Álvaro and Hoyos, A. and Guinea Tortuero, Gustavo V. (2010). Energía gastada en el primer ciclo de histéresis como parámetro de selección de un biomaterial. In: "XXVIII Congreso Anual de la Sociedad Española de Ingeniería Biomédica (CASEIB 2010)", 24/11/2011 - 26/11/2011, Leganés, Madrid.

Ruiz Hervías, Jesús and Martín Rengel, Miguel Ángel and Torres, E. (2011). Estudio del efecto del óxido en el comportamiento en rotura de la vaina de barra combustible. In: "37ª Reunión Anual de la Sociedad Nuclear Española", 28/09/2011 - 30/09/2011, Burgos, España.

Rey de Pedraza Ruiz, Víctor and Gálvez Díaz-Rubio, Francisco and Sancho Cadenas, Rafael and Cendón Franco, David Ángel (2018). Experimental Procedure for Testing Concrete Slabs under Blast Loading. "Proceedings", v. 2 (n. 8); pp. 459-465. ISSN 2504-3900. https://doi.org/10.3390/ICEM18-05368.

Rueda Ruiz, Mario (2021). Experimental and computational micromechanics of fibre-reinforced polymer composites at high strain rates. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.67638.

Ridruejo Rodríguez, Álvaro and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2012). Failure locus of polypropylene nonwoven fabrics under in-plane biaxial deformation. "Comptes Rendus Mecanique", v. 340 (n. 4–5); pp. 307-319. ISSN 1631-0721. https://doi.org/10.1016/j.crme.2012.02.013.

Rodríguez García, Verónica and Gómez, Julio and Cristiano, Francesco and Gude, María R. (2020). Industrial Manufacturing and Characterization of Multiscale CFRP Laminates Made from Prepregs Containing Graphene-Related Materials. "Materials Research Express", v. 7 (n. 7); pp.. ISSN 2053-1591. https://doi.org/10.1088/2053-1591/aba0eb.

Rey de Pedraza Ruiz, Víctor and Cendón Franco, David Ángel and Sanchez Galvez, Vicente and Gálvez Díaz-Rubio, Francisco (2016). Measurement of fracture properties of concrete at high strain rates. "Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences", v. 375 (n. 2085); pp. 1-13. ISSN 1364-503X. https://doi.org/10.1098/rsta.2016.0174.

Rey de Pedraza Ruiz, Víctor (2019). Mechanical Characterization of Tensile Behaviour of Concrete Under High Strain Rates. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.54129.

Ridruejo Rodríguez, Álvaro (2011). Mechanical behavior of nonwoven felts. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Ridruejo Rodríguez, Álvaro and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2011). Modelización numérica del comportamiento mecánico de un fieltro de polipropileno. In: "XXVIII Encuentro del Grupo Español de Fractura", 06/04/2011 - 08/04/2011, Gijón, España.

Ridruejo Rodríguez, Álvaro and Segurado Escudero, Javier and Sabirov, Ilchat and Llorca Martinez, Francisco Javier (2013). Multiscale modeling of a small punch test on nanostructured CP titanium. In: "XII International Conference on Computational Plasticity. Fundamentals and Applications. COMPLAS XII.", 03/09/2013 - 05/09/2013, Barcelona. España.

Roa, J.J. and Konstantopoulou, Konstantina and Jiménez Piqué, E. and Martín, V. and Segarra, M. and Pastor Caño, Jose Ignacio (2012). Nanoindentation of Bridgman YBCO samples. "Ceramics International", v. 38 (n. 3); pp. 2035-2042. ISSN 1361-7605. https://doi.org/10.1016/j.ceramint.2011.10.039.

Ruiz Hervías, Jesús and Martín Rengel, Miguel Ángel and Gómez Sánchez, Francisco Javier and Rico García, Álvaro (2016). Obtención de la ecuación constitutiva de ampollas de hidruros mediante nanoindentación. In: "42ª Reunión Anual de la Sociedad Nuclear Española", 28/09/2016-30/09/2016, Santander, España. pp. 1-8.

Ruiz Hervías, Jesús and Atienza Riera, José Miguel and Elices Calafat, Manuel and Oliver, E.C (2008). Optimisation of post-drawing treatments by means of neutron diffraction. "Materials Science and Engineering A-Structural Materials Properties Microst", v. 480 (n. 1-2); pp. 439-448. ISSN 0921-5093. https://doi.org/10.1016/j.msea.2007.07.017.

Richou, M. and Gallay, F. and Böswirth, B. and Chu, I. and Dose, G. and Greuner, H. and Kermouche, G. and Lenci, M. and Loewenhoff, Th. and Maestracci, R. and Meillot, E. and Missirlian, M. and Pastor Caño, Jose Ignacio and Quet, A. and Roccella, S. and Tejado Garrido, Elena María and Wirtz, M. and Visca, E. and Pintsuk, G. and You, J.H. (2020). Performance Assessment of Thick W/Cu Graded Interlayer for DEMO Divertor Target. "Fusion Engineering and Design", v. 157 ; p. 111610. ISSN 0920-3796. https://doi.org/10.1016/j.fusengdes.2020.111610.

Rieth, M. and Dudarev, S.L. and González de Vicente, S.M. and Aktaa, J. and Ahlgren, T. and Antusch, S. and Armstrong, D.E.J. and Balden, M. and Baluc, N. and Barthe, M.F. and Basuki, W.W. and Battabyal, M. and Becquart, C.S. and Blagoeva, D. and Boldyryeva, H. and Brinkmann, J. and Celino, M. and Ciupinski, L. and Correia, J.B. and De Backer, A. and Domain, C. and Gaganidze, E. and García-Rosales, C. and Gibson, J. and Gilbert, M.R. and Giusepponi, S. and Gludovatz, B. and Greuner, H. and Heinola, K. and Höschen, T. and Hoffmann, A. and Holstein, N. and Koch, F. and Krauss, W. and Li, H. and Lindig, S. and Linke, J. and Linsmeier, Ch. and López-Ruiz, P. and Maier, H. and Matejicek, J. and Mishra, T.P. and Muhammed, M. and Muñoz, A. and Muzyk, M. and Nordlund, K. and Nguyen-Manh, D. and Opschoor, J. and Ordás, N. and Palacios García, Teresa and Pintsuk, G. and Pippan, R. and Reiser, J. and Riesch, J. and Roberts, S.G. and Romaner, L. and Rosinski, M. and Sánchez, M. and Schulmeyer, W. and Traxler, H. and Ureña, A. and Van Der Laan, J.G. and Veleva, L. and Wahlberg, S. and Walter, M. and Weber, T. and Weitkamp, T. and Wurster, S. and Yar, M.A. and You, J.H. and Zivelonghi, A. (2013). Recent progress in research on tungsten materials for nuclear fusion applications in Europe. "Journal of Nuclear Materials", v. 432 ; pp. 482-500. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2012.08.018.

Ruiz Hervías, Jesús and Bruno, G. and Bueno, S. and Gurauskis, J. and Baudin, C. and Fan, K. (2012). Residual strain scanning of alumina-based ceramic composites by neutron diffraction. In: "VI Reunión de la Sociedad Española de Técnicas Neutrónicas (SETN)", 24/06/2012 - 27/06/2012, Segovia, España.

Ruiz Hervías, Jesús and Atienza Riera, José Miguel and Elices Calafat, Manuel (2011). Synchrotron strain scanning for residual stress measurement in cold-drawn steel rods. "Journal of Strain Analysis For Engineering Design", v. 46 (n. 7); pp. 627-637. ISSN 0309-3247. https://doi.org/10.1177/0309324711399684.

Rodríguez García, Verónica (2021). Towards the industrialization of bio-inspired multiscale hierarchical carbon fibre-reinforced polymer composites. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.67314.

S

Sanz Merino, Beatriz and Planas Rosselló, Jaime and Sancho Aznal, José María (2015). A closer look to the mechanical behavior of the oxide layer in concrete reinforcement corrosion. "International Journal of Solids and Structures", v. 62 ; pp. 256-268. ISSN 0020-7683. https://doi.org/10.1016/j.ijsolstr.2015.02.040.

Sanz Merino, Beatriz and Planas Rosselló, Jaime and Sancho Aznal, José María (2013). An experimental and numerical study of the pattern of cracking of concrete due to steel reinforcement corrosion. "Engineering fracture mechanics", v. 114 ; pp. 26-41. ISSN 0013-7944. https://doi.org/10.1016/j.engfracmech.2013.10.013.

Santos Güemes, Rodrigo (2021). Analysis of precipitation hardening in metallic alloys by means of dislocation dynamics. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.67606.

Scutelnicu, Elena and Iordachescu, Mihaela and Georgescu, Bogdan (2008). Analytical models for temperature prediction on welding. In: "1er Congreso Internacional de Soldadura y Tecnologías de Unión: (17as jornadas técnicas)", 07/10/2008-09/10/2008, Madrid, España. ISBN 978-84-934316-4-8.

Scutelnicu, Elena and Iordachescu, Mihaela and Iordachescu, Danut and Blasco Litago, Manuel (2009). Arc welding of Dissimilar Metals:FEA and Experiments. In: "8th International Conference on Trends in Welding Research", 01/06/2008-06/06/2008, Pine Mountain, Georgia (EE.UU.). ISBN 9781615030026.

Shen, Yajing and Cheng, Yu and Uyeda, Taro Q. P. and Plaza Baonza, Gustavo Ramón (2017). Cell Mechanosensors and the Possibilities of Using Magnetic Nanoparticles to Study Them and to Modify Cell Fate. "Annals of Biomedical Engineering", v. 45 (n. 10); pp. 2475-2486. ISSN 1573-9686. https://doi.org/10.1007/s10439-017-1884-7.

Sanz Merino, Beatriz and Planas Rosselló, Jaime and Sancho Aznal, José María (2010). Comparison of the crack pattern in accelerated corrosion tests and in finite elements simulations. In: "XXVII Encuentro del Grupo Español de Fractura. Iberian Conference on Fracture and Structural Integrity 2010", 17/03/2010 - 19/03/2010, Oporto, Portugal.

Senokos, Evgeny (2018). Development of multifunctional flexible and structural supercapacitors based on carbon nanotube fibers. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.52441.

Segurado Escudero, Javier and Chung, H.J. and Llorca Martinez, Francisco Javier and Rodríguez, O. (2013). Discrete (MD) and continuum (DD) simulations of void growth in single crystals.. In: "XII International Conference on Computational Plasticity. Fundamentals and Applications. COMPLAS XII.", 03/09/2013 - 05/09/2013, Barcelona. España..

Segurado Escudero, Javier and Llorca Martinez, Francisco Javier (2010). Discrete dislocation dynamics analysis of the effect of lattice orientation on void growth in single crystals. "International Journal of Plasticity", v. 26 (n. 6); pp. 806-819. ISSN 0749-6419. https://doi.org/10.1016/j.ijplas.2009.10.009.

Soler, R. and Molina Aldareguía, Jon M. and Segurado Escudero, Javier and Llorca Martinez, Francisco Javier (2012). Effect of misorientation on the compression of highly anisotropic single-crystal micropillars. "Advanced Engineering Materials", v. 14 (n. 11); pp. 1004-1008. ISSN 1438-1656.

Sanz Merino, Beatriz and Planas Rosselló, Jaime and Sancho Aznal, José María (2014). Estudio de la fisuración en muestras de hormigón debido a la corrosión de las armaduras. In: "31 GEF. 31 Encuentro del Grupo Español de Fractura", 02/04/2014 - 04/04/2014, San Lorenzo del Escorial, España. pp. 51-56.

Sanz Merino, Beatriz (2014). Experimental and numerical study of cracking of concrete due to reinforcement corrosion. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Sanz Merino, Beatriz and Andrade Perdrix, María del Carmen (2010). Geometrical variation of corrosion parameters in a beam and a pillar of reinforced concrete containing Cl-. In: "Joint fib- Rilem Workshop Modelling of Corroding Concrete Structures", 22/11/2010 - 23/11/2010, Madrid, España. ISBN 9789400706767.

Sinusía Lozano, Miguel and Chen, Zhuohui and Oliver A., Williams and Fuentes Iriarte, Gonzalo (2019). Giant Reflection Coefficient on Sc0.26Al0.74N Polycrystalline Diamond Surface Acoustic Wave Resonators. "physica status solidi (a)", v. 216 (n. 20); p. 1900360. ISSN 1862-6319. https://doi.org/10.1002/pssa.201900360.

Sádaba Cipriain, Sergio (2014). High fidelity simulations of failure in fiber-reinforced composites. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Shi, Dongfeng (2021). Influence of Al and Zn alloying additions on the deformation mechanisms of Mg alloys. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.69339.

Sánchez-Martín, R. and Pérez Prado, María Teresa and Segurado Escudero, Javier and Bohlen, J. and Gutiérrez Urrutia, Iván and Llorca Martinez, Francisco Javier and Molina Aldareguía, Jon M. (2014). Measuring the critical resolved shear stresses in Mg alloys by instrumented nanoindentation. "Acta Materialia", v. 71 ; pp. 283-292. ISSN 1359-6454. https://doi.org/10.1016/j.actamat.2014.03.014.

Sancho Cadenas, Rafael (2020). Mechanical Behaviour and Simulation of Alloys Used in Jet Engines. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.65585.

Segurado Escudero, Javier (2004). Micromecánica computacional de materiales compuestos reforzados con partículas. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Soler, R. and Molina Aldareguía, Jon M. and Segurado Escudero, Javier and Llorca Martinez, Francisco Javier and Merino, R.I. and Orera, V.M. (2012). Micropillar compression of LiF [111] single crystals: effect of size, ion irradiation and misorientation. "International Journal of Plasticity", v. 36 ; pp. 50-63. ISSN 0749-6419. https://doi.org/10.1016/j.ijplas.2012.03.005.

Suárez Guerra, Fernando and Cendón Franco, David Ángel and Gálvez Ruiz, Jaime (2018). Modelo de fractura en modo mixto (I y II) para materiales cementicios. "Anales de Mecánica de la Fractura", v. 35 ; pp. 399-404. ISSN 0213-3725.

Scutelnicu, Elena and Constantin, Emil and Iordachescu, Mihaela and Ocaña Moreno, José Luis (2008). Naval propellers reconditioning by Friction stir welding ¿ FSW. "The Annals of “Dunarea de Jos” University of Galati", v. 12 ; pp. 9-14. ISSN 1221-4639.

Sanz Merino, Beatriz and Planas Rosselló, Jaime and Sancho Aznal, José María (2010). Numerical simulations and accelerated corrosion tests to study the crack pattern of reinforced concrete samples. In: "4th International PhD Workshop ICC Eduardo Torroja", 19/11/2010 - 19/11/2010, Madrid, Spain.

Sanz Merino, Beatriz and Planas Rosselló, Jaime and Sancho Aznal, José María (2011). Parametric study of the expansive joint model for cracking of concrete due to rebar corrosion. In: "XXVIII Encuentro del Grupo Español de Fractura", 06/04/2011 - 08/04/2011, Gijón, España.

Segurado Escudero, Javier and Llorca Martinez, Francisco Javier (2013). Simulation of the deformation of polycrystalline nanostructured Ti by computational homogenization. "Computational materials science", v. 76 ; pp. 3-11. ISSN 0927-0256. https://doi.org/10.1016/j.commatsci.2013.03.008.

Sanz Merino, Beatriz and Planas Rosselló, Jaime and Sancho Aznal, José María (2013). Study of concrete cracking during accelerated corrosion tests in reinforced concrete. In: "8th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-8)", 11/03/2013-14/03/2013, Toledo (España). ISBN 978-84-941004-1-3. pp. 2019-2028.

Sanz Merino, Beatriz and Planas Rosselló, Jaime and Sancho Aznal, José María (2010). Study of the size effect in a model to simulate concrete cracking due to rebar corrosion and comparison to accelerated corrosion tests. In: "IV European Conference on Computational Mechanics", 16/05/2010 - 21/05/2010, Paris, France.

Sinusía Lozano, Miguel (2020). Surface acoustic wave (SAW) devices on ScAlN thin films. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.62796.

Sanchez Galvez, Vicente (2008). Tenacidad de fractura dinámica. "Anales de Mecánica de la Fractura", v. 25 (n. 1); pp. 3-7. ISSN 0213-3725.

Sádaba, Sergio and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2008). Virtual Testing of Composite Laminate Coupons. In: "8th World congress on computational mechanics, WCCM8 - 5th European congress on computational methods in applied sciences and engineering, ECCOMAS", 30/06/2008-4/07/2008, Venecia, Italia. ISBN 978-84-96736-55-9.

Seltzer, R. and González Martínez, Carlos Daniel and Muñoz, R. and Llorca Martinez, Francisco Javier and Blanco-Varela, T. (2013). X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact. "Composites Part A: Applied Science and Manufacturing", v. 45 ; pp. 49-60. ISSN 1359-835X. https://doi.org/10.1016/j.compositesa.2012.09.017.

T

Torres López, Juan José (2019). A study of the factors influencing air removal in Out-of-Autoclave processing of composites. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.56274.

Tavares Bejar, Fabiano (2013). Coupled model of initiation and propagation of corrosion in reinforced concrete. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Tornero-Esteban, Pilar and Hoyas, José Antonio and Villafuertes, Esther and Rodríguez-Bobada, Cruz and López-Gordillo, Yamila and Rojo Pérez, Francisco Javier and Guinea Tortuero, Gustavo V. and Paleczny, Anna and Lópiz-Morales, Yaiza and Rodríguez-Rodríguez, Luis and Marco, Fernando and Fernández-Gutiérrez, Benjamín (2015). Efficacy of supraspinatus tendon repair using mesenchymal stem cells along with a collagen I scaffold. "Journal of Orthopaedic Surgery and Research", v. 10 (n. 124); pp. 1-7. ISSN 1749-799X. https://doi.org/10.1186/s13018-015-0269-6.

Tarancón Román, Sandra and Tejado Garrido, Elena María and Richou, Marianne and Pastor Caño, José Ignacio (2020). Evaluation of the Tensile and Elastic Properties of W/Cu Coatings for its Application to the FGM DEMO Divertor Concept. In: "31st Symposium on Fusion Technology", September 20-25, 2020, Madrid, Spain - Virtual Edition. pp. 1-6.

Totry, Essam and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2008). Failure locus of fiber-reinforced composites under transverse compression and out-of-plane shear. "Composites Science and Technology", v. 68 (n. 3-4); pp. 829-839. ISSN 0266-3538. https://doi.org/10.1016/j.compscitech.2007.08.023.

Totry, Essam and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2008). Influence of the Loading Path on the Strength of Fiber-Reinforced Composites Subjected to Transverse Compression and Shear. "International Journal of Solids and Structures", v. 45 (n. 6); pp. 1663-1675. ISSN 0020-7683. https://doi.org/10.1016/j.ijsolstr.2007.10.014.

Tobaruela, A. and Rojo Pérez, Francisco Javier and Guinea Tortuero, Gustavo V. (2013). La energía disipada en membranas de pericardio sometidas a fatiga uniaxial como predictor de su durabilidad. "Anales de Mecánica de la Fractura", v. 30 (n. 1); pp. 43-46. ISSN 0213-3725.

Tobaruela, A. and Rojo Pérez, Francisco Javier and Guinea Tortuero, Gustavo V. (2013). La energía disipada en membranas de pericardio sometidas a fatiga uniaxial como predictor de su durabilidad.. In: "XXX Encuentro del Grupo Español de Fractura.", 13/03/2013 - 15/03/2013, Toledo. España.

Tejado Garrido, Elena María and Orellana Pérez, T. and Pastor Caño, Jose Ignacio and Funke, V.C. and Fütterer, W. (2012). Mechanical Characterization of Multicrystalline Silicon Substrates for Solar Cell Applications. In: "XXIX Encuentro del Grupo Español de Fractura", 21 de marzo de 2012 a 23 de marzo de 2012, Bilbao (España).

Tejado Garrido, Elena María and Orellana Pérez, T. and Pastor Caño, Jose Ignacio and Funke, V.C. and Fütterer, W. (2012). Mechanical characterization of multicrystalline silicon wafers. In: "4th International Congress on Ceramics (ICC4)", 15/07/2012 - 19/07/2012, Chicago, Estados Unidos. p. 1.

Tejado Garrido, Elena María (2017). Performance of structural materials for the DEMO divertor. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.47067.

Totry, Essam and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2008). Prediction of the Failure Locus of C/PEEK Composites under Transverse Compression and Longitudinal Shear Through Computational Micromechanics. "Composites Science and Technology", v. 68 (n. 15-16); pp. 3128-3136. ISSN 0266-3538. https://doi.org/10.1016/j.compscitech.2008.07.011.

Tobaruela, A. and Rojo Pérez, Francisco Javier and Guinea Tortuero, Gustavo V. and Forteza, A. (2011). Propiedades mecánicas y resistencia de aortas ascendentes patológicas. In: "XXVIII Encuentro del Grupo Español de Fractura", 06/04/2011 - 08/04/2011, Gijón, España. ISBN ISSN 0213-3725.

Tejado Garrido, Elena María and Carvalho, P.A. and Muñoz, A. and Dias, M. and Correia, J.B. and Mardolcar, U.V. and Pastor Caño, Jose Ignacio (2015). The effects of tantalum addition on the microtexture and mechanical behaviour of tungsten for ITER applications. "Journal of Nuclear Materials", v. 467 ; pp. 949-955. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2015.10.034.

Tejado Garrido, Elena María and Müller, Alexander von and You, J.H. and Pastor Caño, Jose Ignacio (2016). Thermal and mechanical properties of W/Cu composite materials for ITER heat sink applications. In: "XXV International Materials Research Congress", 14/08/2016-19/08/2016, Cancún, México. p. 1.

Tejado Garrido, Elena María and Prado Escudero, Javier de and Tarancón Román, Sandra and Sánchez Martínez, María and Martín Sanz, Antonia and Pastor Caño, Jose Ignacio and Ureña Fernández, Alejandro (2020). Thermomechanical Characterisation of W-Eurofer 97 Brazed Joints. "Journal of Nuclear Materials", v. 542 ; p. 152504. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2020.152504.

Tejado Garrido, Elena María (2020). W-Cu Metal Matrix Composites for Next Generation Fusion Devices. "Materials Today", v. 38 ; pp. 136-137. ISSN 1369-7021. https://doi.org/10.1016/j.mattod.2020.07.001.

U

Ureña, Julia and Tejado Garrido, Elena María and Pastor Caño, Jose Ignacio and Velasco, F. and Tsipas, Sofía A. and Jiménez-Morales, A. and Gordo, E. (2018). Role of Beta-Stabilizing Elements on the Microstructure and Mechanical Properties Evolution of Modified PM Ti Surfaces Designed for Biomedical Applications. "Powder Metallurgy" ; pp. 1-10. ISSN 1743-2901. https://doi.org/10.1080/00325899.2018.1426185.

Ulacia, I. and Yi, S. and Pérez Prado, María Teresa and Dudamell, N.V. and Gálvez Díaz-Rubio, Francisco and Letzig, D. and Hurtado, I. (2010). Texture Evolution of AZ31 Magnesium Alloy Sheet at High Strain Rates. In: "4th International Conference on High Speed Forming", 09/03/2010 - 10/03/2010, Columbus, Ohio, EEUU.

V

Vilà, Joaquim and González Martínez, Carlos Daniel and Llorca Martinez, Francisco Javier (2014). A level set approach for the analysis of flow and compaction during resin infusion in composite materials. "Composites Part A: Applied Science and Manufacturing", v. 67 ; pp. 299-307. ISSN 1359-835X. https://doi.org/10.1016/j.compositesa.2014.09.002.

Valiente Cancho, Andrés (1980). Criterios de fractura para alambres. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM).

Valiente Cancho, Andrés and Iordachescu, Mihaela (2012). Damage tolerance of cold drawn ferritic-austenitic stainless steels wires for prestressed concrete. "Construction and Building Materials", v. 36 ; pp. 874-880. ISSN 0950-0618. https://doi.org/10.1016/j.conbuildmat.2012.06.053.

Valiente Cancho, Andrés and Iordachescu, Mihaela and Martín Rengel, Miguel Ángel (2013). Effect of fire on the microstructure and mechanical response of structural steels for building construction. "Metalurgia internaţional", v. 18 (n. 5); pp. 25-28. ISSN 1582-2214.

Valiente Cancho, Andrés and Iordachescu, Mihaela and Martín Rengel, Miguel Ángel (2013). Effect of fire on the microstructure and mechanical response of structural steels for building construction. In: "8th International Conference on Materials Science and Engineering – BRAMAT 2013", 28/02/2013 - 02/03/2013, Brasov, Romania.

Valiente Cancho, Andrés and Iordachescu, Mihaela (2017). Fracture Mechanics Adjustment of the Fatigue Detail Category for Constructional Details of Eurocode 3 Containing Imperfect Transverse Butt Welds. In: "1st International Conference on Structural Integrity and Durability", 14-18 Agosto 2017, Dubrovnik, Croacia. pp. 51-54.

Valiente Cancho, Andrés and Iordachescu, Mihaela and Ruiz Hervías, Jesús and Abreu Rodrigues, Maricely de (2013). Fracture micromechanisms and residual stresses of a highly resistant duplex stainless steel. "Metalurgia internaţional", v. 18 (n. 6); pp. 5-8. ISSN 1582-2214.

Valiente Cancho, Andrés and Iordachescu, Mihaela and Ruiz Hervías, Jesús and Abreu Rodrigues, Maricely de (2013). Fracture micromechanisms and residual stresses of a highly resistant duplex stainless steel. In: "8th International Conference on Materials Science and Engineering – BRAMAT 2013", 28/02/2013 - 02/03/2013, Brasov, Romania.

Valiente Cancho, Andrés and Iordachescu, Mihaela (2012). Tolerancia al daño de acero inoxidable austeno-ferrítico trefilado con resistencia de acero de pretensar. In: "XXIX Encuentro del Grupo Español de Fractura", 21/03/2012 - 23/03/2012, Bilbao (España).

W

Wang, Jingya and Li, Na and Wang, Chuan-Yun and Beltrán, Juan Ignacio and LLorca Martinez, Francisco Javier and Cui, Yuwen (2016). Computational Study of Atomic Mobility in hcp Mg–Al–Zn Ternary Alloys. "Calphad - Computer Coupling of Phase Diagrams and Thermochemistry", v. 54 ; pp. 134-143. ISSN 0364-5916. https://doi.org/10.1016/j.calphad.2016.07.003.

Wang, De-Yi and Li, Na and Alizadeh Balochi, Reza and Monclús, M. A. and Cui, Yuwen and Molina Aldareguía, Jon M. and Llorca Martinez, Francisco Javier (2019). Effect of Solute Content and Temperature on the Deformation Mechanisms and Critical Resolved Shear Stress in Mg-Al and Mg-Zn Alloys. "Acta Materialia", v. 170 ; pp. 155-165. ISSN 1359-6454. https://doi.org/10.1016/j.actamat.2019.03.027.

Wang, De-Yi and Li, Na and Alizadeh Balochi, Reza and Monclús, M. A. and Cui, Y.W. and Molina Aldareguía, Jon M. and Llorca Martínez, Francisco Javier (2019). Effect of Solute Content and Temperature on the Deformation Mechanisms and Critical Resolved Shear Stress in Mg-Al and Mg-Zn Alloys. "Acta Materialia", v. 170 ; pp. 155-165. ISSN 1359-6454. https://doi.org/10.1016/j.actamat.2019.03.027.

Wang, Chuan-Yun (2019). Fast Mapping of Microstructure and Mechanical Properties in Titanium Alloys by Kinetic Diffusion Multiple Approach. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.54505.

Wang, Jingya (2019). High throughput investigation of diffusion and solid solution hardening of HCP Mg alloys. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.56453.

Weck, Arnaud and Segurado Escudero, Javier and Llorca Martinez, Francisco Javier and Wilkinson, David and Böhm, Helmut (2007). Numerical Simulations of Void Linkage in Model Materials using a Nonlocal Ductile Damage Approximation. "International Journal of Fracture", v. 148 (n. 3); pp. 205-219. ISSN 0376-9429. https://doi.org/10.1007/s10704-008-9195-5.

Williams, J.J. and Segurado Escudero, Javier and Llorca Martinez, Francisco Javier and Chawla, N. (2012). Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites. "Materials Science and Engineering A", v. 557 ; pp. 113-118. ISSN 0921-5093. https://doi.org/10.1016/j.msea.2012.05.108.

X

Xia, Peikang (2020). High Strain Rate Mechanical Behavior of Advanced High Strength Steels. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.64476.

Y

Yang, Lingwei (2017). Deformation, strengthening and fracture mechanisms of nanoscale Al/SiC multilayers. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.47765.

Yue, Hangbo and Monreal-Bernal, Alfonso and Fernández-Blázquez, J. P. and Llorca Martinez, Francisco Javier and Vilatela, J. J. (2015). Macroscopic CNT fibres inducing non-epitaxial nucleation and orientation of semicrystalline polymers. "Scientific Reports", v. 5 ; pp. 1-10. ISSN 2045-2322. https://doi.org/10.1038/srep16729.

Yusuf, Abdulmalik (2022). Quest for Fire-safe Lithium-ion Batteries. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.70382.

Z

Zhao, Y. and Konstantopoulou, Konstantina and Wulff, A. C. and Tang, X. and Tian, H. and Suo, H. L. and Pastor Caño, Jose Ignacio and Grivel, J.-C. (2013). Development of One Meter Long Double-Sided CeO2 Buffered Ni-5at.W Templates by Reel-to-Reel Chemical Solution Deposition Route. "IEEE Transactions on Applied Superconductivity", v. 23 (n. 3); p. 6600104. ISSN 1051-8223. https://doi.org/10.1109/TASC.2012.2228293.

Zhang, Lu (2020). Filler Surface Functionalization for Flame Retardant Epoxy Composites. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.64741.

Zhao, Xiaomin and Babu, Heeralal Vignesh and Llorca Martinez, Francisco Javier and Wang, De-Yi (2016). Impact of halogen-free flame retardant with varied phosphorus´s chemical surrounding on the properties of diglycidyl ether of bisphenol-A type epoxy resin: synthesis, fire behaviour, flame-retardant mechanism and mechanical properties. "RSC Advances", v. 64 (n. 6); pp. 59226-59236. ISSN 2046-2069. https://doi.org/10.1039/C6RA13168A.

Zhang, Jing (2020). Metal-Organic Frameworks (MOFs) Derived Hierarchical Hybrids as Fire retardants for Epoxy Composites. Thesis (Doctoral), E.T.S.I. Caminos, Canales y Puertos (UPM). https://doi.org/10.20868/UPM.thesis.66067.

  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM