Browse by Institution

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Name | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | K | L | M | O | P | R | S | T | V
Number of items: 81.

A

Avellaner Lacal, Juan (1999). Análisis estadístico de superficies reflectantes, no ideales, a efectos de conocer la distribución espacial de la energía solar reflejada. Thesis (Doctoral), E.T.S.I. Industriales (UPM).

B

Barriuso, S. and Carreón, H. and Porro González, Juan Antonio and González-Carrasco, J. L. and Ocaña Moreno, José Luis (2013). Assessment of laser peening induced effects on Ti6Al4V by non-destructive measurements. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid. pp. 1-6.

Blasco Litago, Manuel and Iordachescu, Danut and Ocaña Moreno, José Luis (2008). Soldadura láser remota de aceros de alto límite elástico. "Anales de Ingeniería Mecánica", v. 16 ; pp. 547-552. ISSN 0212-5072.

Bergant, Zoran and Grum, Janez and Marko Slabe, Janez and Ocaña Moreno, José Luis (2010). Surface Repair of Tool Made of 12 Ni Maraging Steel by Laser Cladding of NiCoMo Powder. "Advanced Materials Research", v. 89-91 ; pp. 675-680. ISSN 0924-3046. https://doi.org/10.4028/www.scientific.net/AMR.89-91.675.

C

Casquel del Campo, Rafael (2012). Biosensors based on vertically interrogated optofluidic sensing cells. Thesis (Doctoral), E.T.S.I. Industriales (UPM).

Casquel del Campo, Rafael and Lavin Hueros, Alvaro and Sanza Gutiérrez, Francisco Javier and Laguna Heras, Maria Fe and López, A. and Holgado Bolaños, Miguel (2013). Characterization of the Performance of Optical Label-Free Biosensors. In: "EUROMAT 2013", 08/09/2013 - 13/02/2014, Sevilla, España. pp. 50-100.

Chen, Yu (2016). Desarrollo de procesos para formación de contactos con láser para módulos thin film CIGS para aplicaciones fotovoltaicas. Thesis (Doctoral), E.T.S.I. Industriales (UPM). https://doi.org/10.20868/UPM.thesis.43937.

Colina Brito, Mónica and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Allens-Perkins, F. and Guadaño, G. and Ocaña Moreno, José Luis (2011). Laser ablation modelling of aluminium, silver and crystalline silicon for applications in photovoltaic technologies. "Energy Materials", v. 27 (n. 6); pp. 414-423. ISSN 1748-9237. https://doi.org/10.1179/174329409X397804.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Sanchez Perez, Angel M. and Ocaña Moreno, José Luis (2008). Metrología óptica dimensional submicrométrica para determinación de espesores en sub-micro estructuras. "Anales de Ingeniería Mecánica", v. 16 (n. 1); pp. 499-504. ISSN 0212-5072.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and Sanza Gutiérrez, Francisco Javier and Laguna Heras, Maria Fe and Angulo Barrios, Carlos and López-Romero Moraleda, David and Ortega, Francisco J. and Bañuls, María José and Puchades, Rosa and Maquieira, A. (2011). Optimization of a label-free biosensor vertically characterized based on a periodic lattice of high aspect ratio SU-8 nano-pillars with a simplified 2D theoretical model. "Physica Status Solid c", v. 8 (n. 3); pp. 1087-1092. ISSN 1610-1642. https://doi.org/10.1002/pssc.201000412.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Ocaña Moreno, José Luis (2008). Optimization of interferometric photonic cells for biochemical sensing based on advanced high sensitivity optical techniques. In: "1ª Conferencia Española de Nanofotónica (CEN2008)", 02/04/2008-04/04/2008, Tarragona. pp. 151-152.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and García-Ballesteros Ramírez, Juan José and Zinoviev, K. and Férnandez-Sánchez, C. and Sanza Gutiérrez, Francisco Javier and Molpeceres Álvarez, Carlos Luis and Laguna Heras, Maria Fe and Llobera, A. and Ocaña Moreno, José Luis and Dominguez, C. (2011). UV laser-induced high resolution cleaving of Si wafers for micro-nano devices and polymeric waveguide characterization. "Applied Surface Science", v. 257 (n. 12); pp. 5424-5428. ISSN 0169-4332. https://doi.org/10.1016/j.apsusc.2010.11.021.

Casquel del Campo, Rafael and Holgado Bolaños, Miguel and Lavin Hueros, Alvaro and Angulo Barrios, Carlos and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Ocaña Moreno, José Luis (2008). Vertical resonant microcativites based on pillars analyzed by beam profile ellipsometry and reflectometry. In: "XXII Eurosensors (2008)", 07/09/2008-10/09/2008, Dresden (Alemania). ISBN 978-3-00-025217-4. pp. 1577-1580.

D

Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Porro González, Juan Antonio and Correa, C. and Ocaña Moreno, José Luis (2013). Effect of Thermal Relaxation on LSP Induced Residual Stresses and Fatigue Life Enhancement of AISI 316L stainless steel. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

E

Elizondo, Martha Angélica and Chávez, René E. and Cámara Moral, María Encarnación and Tejero, Andrés (2012). Application of Wignner-Ville distribution to identify anomalies in GPR profiles. "Geofísica Internacional", v. 51 (n. 2); pp. 121-127. ISSN 0016-7169.

F

Fernández Robledo, Susana and Lauzurica Santiago, Sara and García-Ballesteros Ramírez, Juan José and Molpeceres Álvarez, Carlos Luis and Guadaño Ayuso, Gonzalo and Allen-Perkins, F. and Ocaña Moreno, José Luis (2008). Avances en la fabricación de células y módulos fotovoltaicos de silicio en capa fina mediante láser. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 295-300. ISSN 0212-5072.

Fernández Pareja, María Teresa (2012). Evaluación y análisis de la trazabilidad metrológica en redes para la verificación y calibración de instrumental GNSS (Global Navigation Satellite System). Thesis (Doctoral), E.T.S.I. Industriales (UPM).

G

García Beltrán, Ángel (1996). Desarrollo y validación de un modelo computacional para la predicción y caracterización de procesos de tratamiento térmico superficial de materiales con láser. Thesis (Doctoral), E.T.S.I. Industriales (UPM).

Garcia Garcia, Oscar and Muñoz Martín, David and García-Ballesteros Ramírez, Juan José and Chen, Yu and Morales Furió, Miguel and Carabe, J. and Gandia, J.J. and Molpeceres Álvarez, Carlos Luis (2013). Experimental and numerical study of cw green laser crystallization of a-Si:H thin films. In: "Lasers and Electro-Optics Europe (CLEO EUROPE/IQEC), 2013 Conference on and International Quantum Electronics Conference", 12/05/2013 - 16/05/2013, MUNICH. ISBN 978-1-4799-0593-5. p. 1.

Gámez Mejías, María de Linarejos and Gamez Mejias, Berta and Caturla Terol, Maria Jose and Ortiz, Christopher and Perlado Martín, José Manuel (2008). He production and induced swelling in KOYO-F. "Journal Of Physics: Conference Series", v. 112 (n. 3); pp.. ISSN 1742-6596. https://doi.org/10.1088/1742-6596/112/3/032042.

García-Ballesteros Ramírez, Juan José (2015). Interconexión monolítica de módulos fotovoltaicos de silicio amorfo en lámina delgada sobre vidrio mediante ablación láser en régimen de nanosegundos. Thesis (Doctoral), E.T.S.I. Industriales (UPM).

Grum, Janez and Trdan, Uros and Ocaña Moreno, José Luis and Porro González, Juan Antonio (2010). Laser Peening For Improving Metallic Components. "Metal Finishing News", v. 11 (n. marzo); pp. 58-60. ISSN 0026-0576.

Grum, Janez and Zupancic, Martin and Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio (2008). Laser shock processing as a method of decreasing fatigue of a die-casting die made of maraging steel. "Int. J. Microstructure and Materials Properties", v. 3 (n. 2); pp. 271-281. ISSN 1741-8429. https://doi.org/10.1504/IJMMP.2008.018734.

Garcia Garcia, Oscar and Morales Furió, Miguel and García-Ballesteros Ramírez, Juan José and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and Sanchez Perez, Angel M. and Ocaña Moreno, José Luis (2008). Microconformado de Materiales Metálicos mediante Pulsos Láser en el Dominio de ns. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 505-510. ISSN 0212-5072.

Gámez Mejías, María de Linarejos and Gamez Mejias, Berta and Caturla Terol, Maria Jose and Terentyev, D. and Perlado Martín, José Manuel (2011). Object Kinetic Monte Carlo calculations of irradiated Fe-Cr dilute alloys: The effect of the interaction radius between substitutional Cr and self-interstitial Fe. "Nuclear Instruments and Methods in Physics Research B", v. 269 (n. 14); pp. 1684-1688. ISSN 0167-5087. https://doi.org/10.1016/j.nimb.2010.12.044.

Gámez Mejías, María de Linarejos and Gamez Mejias, Berta and Caturla Terol, Maria Jose and Terentyev, D. and Perlado Martín, José Manuel and Malerba, L. and Perlado Martín, José Manuel (2010). Resistivity Recovery curves of electron-irradiated FeCr alloys with Object Kinetic Monte Carlo: influence of Cr interctions.. In: "19th Topical Meeting on the Technology of Fusion Energy", 07/11/2010 - 11/11/2010, Las Vegas, EEUU.

Gamez Mejias, Berta and Gámez Mejías, María de Linarejos and Caturla Terol, Maria Jose and Terentyev, D. and Malerba, L. and Perlado Martín, José Manuel (2010). Simulations of Resistivity Recovery curves of electron-irradiated dilute FeCr alloys using an Object Kinetic Monte Carlo Model.. In: "26th Symposium on fusion technology", 27/09/2010 - 01/10/2010, Oporto, Portugal.

García Beltrán, Ángel and Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis (2008). TEMPLUM: A Process Adapted Numerical Simulation Code for The 3D Predictive Assessment of Laser Surface Heat Treatments in Planar Geometry. "Wseas Transactions on Computers", v. 7 (n. 2); pp. 65-74. ISSN 1109-2750.

Gámez Mejías, María de Linarejos and Gamez Mejias, Berta and Caturla Terol, Maria Jose and Terentyev, D. and Perlado Martín, José Manuel (2010). The Importance of the Interaction Radius Between Cr and Self-interstitial Fe in Object Kinetic Monte Carlo Calculations of Irradiated FeCr Diluted Alloys. In: "10th International Conference on Computer Simulations of Radiation Effects in Solids", 19/07/2010 - 23/07/2010, Cracovia, Polonia.

H

Holgado Bolaños, Miguel and Laguna Heras, Maria Fe and Casquel del Campo, Rafael and Sanza Gutiérrez, Francisco Javier and Lavin Hueros, Alvaro and López, A. and Bañuls, María José and Barrios, C.A. and Canalejas Tejero, Victor and Puchades, Rosa (2013). Biophotonic Sensing Cells (BICELLs) for label-free biosensing. In: "EUROMAT 2013", 08/09/2013 - 13/02/2014, Sevilla, España. pp. 1-3.

Holgado Bolaños, Miguel and Sanza Gutiérrez, Francisco Javier and Lavin Hueros, Alvaro and Casquel del Campo, Rafael and Laguna Heras, Maria Fe and Vicente, J. de and Lópeza, A. and Bañuls, María José and Barrios, C.A. and Canalejas Tejero, Victor and Puchades, Rosa (2013). Biophotonic Sensing Cells Optimization for label-free biosensing. In: "OPTOEL 2013. VIII Reunión Española de Optoelectrónica", 10-12 julio 2013, Alcalá de Henares. Madrid.. ISBN 978-84-88754-21-9.

I

Iordachescu, Danut and Porro González, Juan Antonio and Iordachescu, Mihaela and Ruiz Hervías, Jesús and Ocaña Moreno, José Luis and Vilaca, Pedro (2011). Characterization Of Friction Stir Welded Joints Of Aa 2024-T351 - Native Vs. Treated By Laser Shock Processing. In: "7 th International Conference on Materials Science & Engineering – BRAMAT 2011", 24/02/2011 - 26/02/2011, Poiana Brasov, Rumania. pp. 63-66.

Iordachescu, Danut and Birsan, Dan and Iordachescu, Mihaela and Ocaña Moreno, José Luis and Porro González, Juan Antonio (2009). FEM model and experiments for friction stir spot welding of AA6061-T4. In: "8th International Conference on Trends in Welding Research 2008", 01/06/2008-06/06/2008, Pine Mountain, Georgia (EE.UU.). ISBN 978-1-615-03002-6.

Ivetic, G. and Meneghin, I. and Troiani, E. and Molinari, G. and Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Lanciotti, A. and Ristori, V. and Polese, Claudia and Plaisier, J. and Lausi, A. (2012). Fatigue in laser shock peened open-hole thin aluminium specimens. "Materials Science and Engineering: A", v. 542 ; pp. 573-579. ISSN 0921-5093. https://doi.org/10.1016/j.msea.2011.12.010.

Iordachescu, Mihaela and Valiente Cancho, Andrés and Ocaña Moreno, José Luis and Porro González, Juan Antonio and Ruiz Hervías, Jesús (2013). LSP Influence on Mechanical Properties of Thin Dissimilar Laser Welded Joints. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

Ivetic, G. and Meneghin, I. and Troiani, E. and Molinari, G. and Lanciotti, A. and Ocaña Moreno, José Luis and Ristori, V. and Morales Furió, Miguel and Porro González, Juan Antonio and Plaisier, J. and Lausi, A. (2011). The Effect of Sequence of Operations on Fatigue Life of LSP Treated Open-hole Aluminium Specimens. In: "3rd International Conference on Laser Peening", 11/10/2011 - 14/10/2011, Osaka, Japón.

Iordachescu, Mihaela and Scutelnicu, Elena and Iordachescu, Danut and Ocaña Moreno, José Luis (2008). Welding in solid state. In: "1er Congreso Internacional de Soldadura y Tecnologías de Unión", 07/10/2008-09/10/2008, Madrid, España. ISBN 978-84-934316-4-8.

K

Knaster Refolio, Juan Ramón (2004). The vacuum chamber in the interaction region of particle colliders : a historical study and developments implemented in the LHCb experiment at CERN. Thesis (Doctoral), E.T.S.I. Industriales (UPM).

L

Li, Chuang and Cordovilla Baró, Francisco and Jagdheesh, Radhakrishnan and Ocaña Moreno, José Luis (2018). Design Optimization and Fabrication of a Novel Structural SOI Piezoresistive Pressure Sensor with High Accuracy. "Sensors" (n. 18); pp.. ISSN 1424-8220. https://doi.org/10.3390/s18020439.

Lavin Hueros, Alvaro and Casquel del Campo, Rafael and Sanza Gutiérrez, Francisco Javier and Laguna Heras, Maria Fe and Holgado Bolaños, Miguel (2013). Efficient design and optimization of bio-photonic sensing cells (BICELLs) for label free biosensing. "Sensors and Actuators B: Chemical", v. 176 ; pp. 753-760. ISSN 0925-4005. https://doi.org/10.1016/j.snb.2012.09.058.

Lauzurica Santiago, Sara (2013). Interconexión monolítica de dispositivos fotovoltaicos basados en a-Si mediante ablación directa con fuentes láser ultravioleta. Thesis (Doctoral), E.T.S.I. Industriales (UPM).

Laguna Heras, Maria Fe and Sanza Gutiérrez, Francisco Javier and Ceresuela Soria, Jose Luis and Lavin Hueros, Alvaro and Casquel del Campo, Rafael and Suarez, T. and Holgado Bolaños, Miguel (2013). Label-free biosensing for dry eye by Means of BICELLS. In: "BITE 2013 : 3rd International Conference on Bio-Sensing Technology", 13th - 15th May 2013, Sitges, España.

Lauzurica Santiago, Sara and García-Ballesteros Ramírez, Juan José and Colina Brito, Mónica and Sanchez Aniorte, Maria Isabel and Molpeceres Álvarez, Carlos Luis (2011). Selective ablation with UV lasers of a-Si:H thin film solar cells in direct scribing configuration. "Applied Surface Science", v. 257 (n. 12); pp. 5230-5236. ISSN 0169-4332. https://doi.org/10.1016/j.apsusc.2010.09.088.

M

Morales Furió, Miguel and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and Holgado Bolaños, Miguel and Ocaña Moreno, José Luis (2010). Analysis of plasma thermal surface effects on the residual stress field induced by LSP in Al2024-t351. "Journal of Optoelectronics and Advanced Materials", v. 12 (n. 3); pp. 718-722. ISSN 1454-4164.

Medina, Nieves and Vicente y Oliva, Jesus de (2014). Force Sensor Characterization Under Sinusoidal Excitations. "Sensors", v. 14 (n. 10); pp. 18454-18473. ISSN 1424-8220. https://doi.org/10.3390/s141018454.

Molpeceres Álvarez, Carlos Luis and Muñoz Martín, David and Sánchez, Isabel and Morales Furió, Miguel and Colina Brito, Mónica and Martín, Isidro and Ortega, Pablo and Voz, C. and Alcubilla, R. (2013). Laser Processes for Contact Optimization in c-Si Solar Cells. In: "Advanced Solid - State Laser Congress", 27 October - 01 November 2013, París (FRANCIA).

Molpeceres Álvarez, Carlos Luis and García-Ballesteros Ramírez, Juan José and Lauzurica Santiago, Sara and Vicente y Oliva, Jesus de and Ocaña Moreno, José Luis (2008). Micromecanizado Láser de Componentes de Gran calidad de Acabado Superficial. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 511-516. ISSN 0212-5072.

Morales Furió, Miguel and Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis and Porro González, Juan Antonio and García y Beltrán, Ángel (2008). Model based optimization criteria for the generation of deep compressive residual stress fields in high elastic limit metallic alloys by ns-laser shock processing. "Surface and Coatings Technology", v. 202 (n. 11); pp. 2257-2262. ISSN 0257-8972. https://doi.org/10.1016/j.surfcoat.2007.12.007.

Molpeceres Álvarez, Carlos Luis and Colina Brito, Mónica and Muñoz Martín, David and Martín, Isidro and Ortega, Pablo and Sánchez, Isabel and Morales Furió, Miguel and Lauzurica Santiago, Sara and García Ballesteros, Juan J. and Voz, C. and López Rodríguez, Gema and Morales, Ana Belén and Alcubilla, R. (2013). New laser-based approaches to improve the passivation and rear contact quality in high effiency crystalline silicon solar cells. In: "Laser Material Processing for Solar Energy Devices II", San Diego, California, United States, 25/08/2013. https://doi.org/10.1117/12.2026202.

Morales Furió, Miguel and Molpeceres Álvarez, Carlos Luis and Porro González, Juan Antonio and García Beltrán, Ángel and Ocaña Moreno, José Luis (2010). Numerical Thermo-Mechanical Modelling Of Stress Fields and Residual Constraints in Metallic Targets Subject To Laser Shock Processing. "Materials Science Forum", v. 638-64 ; pp. 2682-2687. ISSN 1662-9752. https://doi.org/10.4028/www.scientific.net/MSF.638-642.2682.

O

Ocaña Moreno, José Luis and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and Holgado Bolaños, Miguel and García-Ballesteros Ramírez, Juan José and Lauzurica Santiago, Sara and Porro González, Juan Antonio and Garcia Garcia, Oscar and Iordachescu, Danut (2009). Application of high intensity short pulse lasers to precision micromanufacturing. In: "Conference “Diaspora in Cercetarea Stiintifica si Invatamantul Superior din Romania", 17/09/2008-19/09/2008, Bucarest, Rumania.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos and Gil Santos, Andrea (2012). Application of high-intensity short-pulse lasers to the mechanical and surface properties improvement of high reliability metallic components by shock processing. In: "VII Internacional Conference BT/LA", 18/09/2012-21/09/2012, Saint Petersburg, Russia.

Ocaña Moreno, José Luis and García Beltrán, Ángel and Molpeceres Álvarez, Carlos Luis and Morales Furió, Miguel and González González, José Manuel and Blasco Litago, Manuel (2008). Diseño y desarrollo de un laboratorio virtual de aplicaciones industriales con láser. In: "INECE'08 - II Jornadas internacionales U.P.M. sobre Innovación Educativa y Convergencia Europea", 09/12/2008-11/12/2008, Madrid, España. ISBN 978-84-691-9885-8. pp. 1-15.

Ocaña Moreno, José Luis and Diaz Muñoz, Marcos and Porro González, Juan Antonio and Ruiz de Lara de Luis, Leonardo and Correa, C. (2014). Effect of Thermal Treatments on the Mechanical Properties Enhancement of High Reliability Metallic Materials by Laser Shock Processing. In: "THERMEC 2013, 8th International Conference on Processing & Manufacturing of Advanced Materials Processing, Fabrication, Properties Applications", 2/12/2013 - 6/12/2013, Las Vegas, USA. ISBN 978-3-03835-073-6.

Ocaña Moreno, José Luis (2013). High Intensity Lasers Application to Advanced Materials Processing: Laser Peening and Related Processes. In: "ELI Beamlines Summer School (ELISS 2013)", 23/06/2013 - 28/06/2013, Prague, Czech Republic.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2011). Improvement of Mechanical Properties and Life Extension of High Reliability Structural Components by Laser Shock Processing. In: "Eco-Photonics 2011", 28/03/2011 - 30/03/2011, Estrasburgo, Francia.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Blasco Litago, Manuel and Molpeceres Álvarez, Carlos Luis and Iordachescu, Danut and Gomez-Rosas, G. and Rubio-Gonzalez, C. (2010). Induction of Engineered Residual Stresses Fields and Associate Surface Properties Modification by Short Pulse Laser Shock Processing. "Materials Science Forum", v. 638-64 ; pp. 2446-2451. ISSN 1662-9752. https://doi.org/10.4028/www.scientific.net/MSF.638-642.2446.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa, C. and Gil Santos, Andrea and Peral Jiménez, David (2013). Induction of engineered residual stresses fields and enhancement of fatigue life of high reliability metallic components by laser shock processing. In: "International Conference on High-Power Laser Materials Processing - Lasers, Beam Delivery, Diagnostics, and Applications II.", 02/02/2013 - 7/02/2013, San Francisco, California (EE. UU.). ISBN 9780819493729.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Garcia Garcia, Oscar and Porro González, Juan Antonio and Correa Guinea, Carlos and García-Ballesteros Ramírez, Juan José (2013). Laser Shock Micro-Forming as an Emerging Technique for Microsystems Shaping and Adjustment. In: "4M2013 Conference. 10th International Conference on Multi-Material Micro Manufacture", 08/10/2013-10/10/2013, San Sebastián, España. ISBN 978-981-07-7248-2.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Correa Guinea, Carlos and Morales Furió, Miguel and García-Ballesteros Ramírez, Juan José (2013). Laser Shock Microforming of Thin Metal Sheets with Q-Switched ns Lasers. In: "4th International Conference on Laser Peening and Related Phenomena", 06/05/2013 - 10/05/2013, Madrid (Spain). pp. 1-6.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and García-Ballesteros Ramírez, Juan José and Correa Guinea, Carlos (2011). Laser Shock Microformingof Thin Metal Sheets with ns Lasers. In: "Sixth International WLT Conference on Lasers in Manufacturing", 23/05/2011 - 26/05/2011, Munich, Alemania. https://doi.org/10.1016/j.phpro.2011.03.123.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos and Gil Santos, Andrea (2011). Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys. In: "8th international Conference on Industrial Tools and material Processing Technologies", 02/10/2011 - 05/10/2011, Ljubljana, Eslovenia.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2012). Laser shock processing: an emerging technique for the improvement of fatigue life and surface properties of high reliability metallic components. In: "4th International Conference on Materials Science and Technologies (ROMAT 2012)", 17/10/2012 -19/10/2012, Bucharest, Romania.

Ortega, Pablo and Orpella, A. and Martín, Isidro and López Rodríguez, Gema and Voz, C. and Sanchez Aniorte, Maria Isabel and Molpeceres Álvarez, Carlos Luis and Alcubilla, R. (2012). Laser-fired contact optimization in c-Si solar cells. "Progress in Photovoltaics", v. 20 (n. 2); pp.. ISSN 1062-7995. https://doi.org/10.1002/pip.1115.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Iordachescu, Danut and Diaz Muñoz, Marcos and Ruiz de Lara de Luis, Leonardo and Correa Guinea, Carlos (2012). Mechanical properties enhancement of high reliability metallic materials by laser shock processing. "Materials Science Forum", v. 706-70 ; pp. 2565-2570. ISSN 0255-5476. https://doi.org/10.4028/www.scientific.net/MSF.706-709.2565.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Correa Guinea, Carlos and Colón Hernández, Cristóbal and Alonso Medina, Aurelia and Autric, Michele L. (2012). Physical characterization of laser interaction and shock generation in laser processing: coupled theoretical-experimental analysis. In: "International High Power Laser Ablation Conference (HPLA2012)", 30/04/2012 - 03/05/2014, Santa Fe, NM, USA.

Ocaña Moreno, José Luis and Porro González, Juan Antonio and Morales Furió, Miguel and Correa Guinea, Carlos and Colón Hernández, Cristóbal and Alonso Medina, Aurelia and Autric, Michele L. (2012). Physical characterization of laser interaction and shock generation in laser shock processing: coupled theoretical-experimental analysis. In: "Unspecified. pp. 209-218. https://doi.org/10.1063/1.4739875.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Molpeceres Álvarez, Carlos Luis and Porro González, Juan Antonio and Iordachescu, Danut (2008). Predictive assessment of plasma dynamics effects on the shock transformation of metallic alloys by laser shock processing. In: "International Conference. Modern Laser Applications. Indlas 2008", 20/05/2008-23/05/2008, Bran, Rumania.

Ocaña Moreno, José Luis and Morales Furió, Miguel and Porro González, Juan Antonio and Molpeceres Álvarez, Carlos Luis and García Beltrán, Ángel (2008). Scientific and Technological Issues on the Application of High Intensity Lasers to Material Properties Modification: The case of Laser Shock Processing of Metallic Alloys. In: "International Conference Extreme Light Infraestructure", 16/09/2008-18/09/2008, Bucarest, Rumania.

P

Porro González, Juan Antonio and Morales Furió, Miguel and Molpeceres Álvarez, Carlos Luis and Sanchez Perez, Angel M. and Ocaña Moreno, José Luis (2008). Análisis de Tensiones Residuales Inducidas en Aleaciones Metálicas por Tratamientos Superficiales mediante Ondas de Choque Generadas por Láser. "Anales de Ingeniería Mecánica", v. 8 ; pp. 815-820. ISSN 0212-5072.

Prieto Esteban, Emilio (2007). Desarrollo de comparador interferométrico universal para la calibración de patrones materializados de longitud. Thesis (Doctoral), E.T.S.I. Industriales (UPM).

Porro González, Juan Antonio (2010). Optimización de campos de tensiones residuales en procesos de tratamiento superficial de materiales metálicos mediante ondas de choque generadas por láser. Thesis (Doctoral), E.T.S.I. Industriales (UPM).

R

Rio Redondo, Emma del and Sampedro, Jesus and Dogo, Harun and Caturla Terol, Maria Jose and Caro, Magdalena and Caro, Alfredo and Perlado Martín, José Manuel (2011). Formation energy of vacancies in FeCr alloys: Dependence on Cr concentration. "Journal of Nuclear Materials", v. 408 (n. 1); pp. 18-24. ISSN 0022-3115. https://doi.org/10.1016/j.jnucmat.2010.10.021.

S

Sanchez Aniorte, Maria Isabel and Muñoz Martín, David and Morales Furió, Miguel and Ortega, Pablo and Martín, Isidro and Colina Brito, Mónica and Alcubilla, R. and Molpeceres Álvarez, Carlos Luis (2012). Influence of laser wavelength on Laser-Fired contacts for crystalline silicon solar cells. In: "27th EU PVSEC 2012", 24/09/2012 - 28/09/2012, Frankfurt, Alemania.

Sanchez Aniorte, Maria Isabel (2012). Microprocesos láser para la mejora de dispositivos fotovoltaicos basados en silicio cristalino. Thesis (Doctoral), E.T.S.I. Industriales (UPM).

Sanchez Aniorte, Maria Isabel and Barrio, R. and Casado, A. and Morales Furió, Miguel and Carabe, J. and Gandia, J.J. and Molpeceres Álvarez, Carlos Luis (2012). Optimization of laser-firing processes for silicon-heterojunction solar-cell back contacts. "Applied Surface Science", v. 258 (n. 23); pp. 33-35. ISSN 0169-4332. https://doi.org/10.1016/j.apsusc.2011.09.108.

T

Trdan, Uros and Porro González, Juan Antonio and Ocaña Moreno, José Luis and Grum, Janez (2012). Laser shock peening without absorbent coating (LSPwC) effect on 3D surface topography and mechanical properties of 6082-T651 Al alloy. "Surface and Coatings Technology", v. 208 ; pp. 109-116. ISSN 0257-8972. https://doi.org/10.1016/j.surfcoat.2012.08.048.

V

Vicente y Oliva, Jesus de and Molpeceres Álvarez, Carlos Luis and Guarneiros, O. and García-Ballesteros Ramírez, Juan José (2008). Calibración de Microscopios Confocales. "Anales de Ingeniería Mecánica", v. 1. Año ; pp. 307-312. ISSN 0212-5072.

Vicente y Oliva, Jesus de and Holgado Bolaños, Miguel and Lavin Hueros, Alvaro and Sanza Gutiérrez, Francisco Javier and Casquel del Campo, Rafael and Laguna Heras, Maria Fe (2013). Incertidumbre en bio-sensores ópticos asociada al desplazamiento espectral de los modos de interferencia de la señal de transducción. In: "VIII Reunión Española de Optoelectrónica (OPTOEL 2013)", 10/06/2013 - 13/06/2014, Alcalá de Henares, Madrid. p. 1.

Vicente Oliva, Jesús de and Sanchez Perez, Angel M. and Berzal Rubio, Miguel and Maresca, Piera and Gomez Garcia, Emilio (2014). Uncertainty in ellipse fitting using a flatbed scanner: development and experimental verification. "Measurement Science and Technology", v. 25 (n. 1); pp. 1-10. ISSN 0957-0233. https://doi.org/10.1088/0957-0233/25/1/015005.

Vicente Oliva, Jesús de and Holgado Bolaños, Miguel and Lavin Hueros, Alvaro and Sanza Gutiérrez, Francisco Javier and Casquel del Campo, Rafael and Laguna Heras, Maria Fe (2014). Uncertainty in optical bio-sensors due to the spectral displacement of the interference modes of the transduction signal. Incertidumbre en bio-sensores ópticos asociada al desplazamiento espectral de los modos de interferencia de la señal de transducción. "Optica Pura y Aplicada", v. 47 (n. 1); pp. 27-34. ISSN 2171-8814. https://doi.org/10.7149/OPA.47.1.27.

  • Logo InvestigaM (UPM)
  • Logo GEOUP4
  • Logo Open Access
  • Open Access
  • Logo Sherpa/Romeo
    Check whether the anglo-saxon journal in which you have published an article allows you to also publish it under open access.
  • Logo Dulcinea
    Check whether the spanish journal in which you have published an article allows you to also publish it under open access.
  • Logo de Recolecta
  • Logo del Observatorio I+D+i UPM
  • Logo de OpenCourseWare UPM