Estudio de la capacidad de arranque de una dinamita gelatinosa frente a una dinamita de seguridad

Bonilla, Javier (2013). Estudio de la capacidad de arranque de una dinamita gelatinosa frente a una dinamita de seguridad. Trabajo Fin de Grado / Proyecto Fin de Carrera, E.T.S.I. Minas (UPM) [antigua denominación].

Descripción

Título: Estudio de la capacidad de arranque de una dinamita gelatinosa frente a una dinamita de seguridad
Autor/es:
  • Bonilla, Javier
Director/es:
Tipo de Documento: Trabajo Fin de Grado o Proyecto Fin de Carrera
Fecha: 3 Febrero 2013
Materias:
ODS:
Escuela: E.T.S.I. Minas (UPM) [antigua denominación]
Departamento: Ingeniería Topográfica y Cartografía
Licencias Creative Commons: Ninguna

Texto completo

[thumbnail of PFC_JAVIER_BONILLA_RUIZ_DE_VALDIVIA.pdf] PDF (Portable Document Format) - Acceso permitido solamente a usuarios en el campus de la UPM - Se necesita un visor de ficheros PDF, como GSview, Xpdf o Adobe Acrobat Reader
Descargar (3MB)

Resumen

The objective of this project is to show that the permissible explosive called 20 SR is able to pull out the coal in the normal conditions of blasting in a satisfactory way and to set up the equivalence between the 20 SR and gelatin dynamite (Goma 2 ECO). To achieve this goal some blasting were done, changing the conditions of the blasting and the powder factor for the 20 SR. To analyze the fragmentation base on the analysis of the images of the rock blasted, a commercial software was used. The results from this analysis were compared with the results from the theoretical model for fragmentation created by Kuz – Ram. After all, it was showed that the 20 SR explosive is able to pull out the coal for different coal rock compositions. As the result of this project we can conclude that the 20 SR seems to be able to pull out the coal in normal blasting conditions, using the powder factor as a proportion of the “ballistic mortar” between the two explosives.

Más información

ID de Registro: 14411
Identificador DC: https://oa.upm.es/14411/
Identificador OAI: oai:oa.upm.es:14411
Depositado por: Sr Javier Bonilla
Depositado el: 07 Feb 2013 15:21
Ultima Modificación: 27 May 2022 16:43